ETC Accessories Product Financing

This 14" x 28" DIN rail Enclosure offers a convenient location to house your devices. Designed to work with all ETC Unison Echo®, Unison Mosaic®, and Response™ devices, as well as additional third party products, this enclosure is idea ...

ETC reflector housing assembly for all Source Four Standard ellipsoidals, including:     5°10°19°26°36°50° 

UL socket w/44" lead wire for ETC Source 4 ellipsoidals and Source 4 Jr. * you must install Lamp Retainer Retrofit Kit (part # 7060A1033) in pre-1997 fixtures in order to replace the lamp socket. * Note: Please see part# 7061B7002 for the ...

Power cube for the ETC D20 dual dimmer module.

ETC's EchoConnect® DIN Rail Station Power Supply provides EchoConnect bus power for up to 16 sensors/stations and 16 power controllers as well as Aux 24VDC for Echo products that require it. This product consists of two components that mu ...

ETC's DPJ-5 is a 5 ft. Powercon male to female fixture to fixture power-thru jumper cable. This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.

The Ion Xe 20 - FC is a flight case made specifically for ETC's Ion Xe™ 20 control console.

This flight case from ETC is made specifically for their Ion Xe™ control console. The case can also hold one Eos® Fader Wing or Motorized Fader Wing.

The 7067K1001 DMX to RJ45 Data Accessory Kit from ETC is designed for use with ETC's Source 4WRD and ColorSource fixtures. Well suited for adapting a run of RJ45 fixtures to an existing 5-pin infrastructure, this kit includes two 6.5' RJ45 ...

The W6539 from ETC is an RJ45 to 5-pin XLR male adapter and is 6 ft. in length. Specifications Connectors: RJ45 to 5-pin XLR Length: 6 ft.

Socket assembly for the ETC TP22 and Source Four lighting fixtures.It's rated up to 750 watts, is 41" long, and is not rated for use in ellipsoidals or juniors.

The W6538 from ETC is an RJ45 to 5-pin XLR female adapter.

The ETC ECPB DMXIN/OUT is a 2 Gang DMX input and output wallplate designed for use with the RACO 691 (or equivalent) ECPB station back box (sold separately). ETC ECPB DMXIN/OUT Features: Faceplates are .80” aluminum Finished in fine text ...

As part of ETC’s Unison Echo lineup of lighting and power control solutions, the Echo Station Power Supply delivers EchoConnect power for stations, featuring responsive controls and power controllers. Tailored for integration with distri ...

Power cube for ETC D50AF dimmer module.

Black yoke kit for ETC Source 4. Yoke hardware kit includes: handle washer bolt

This dust cover for your Ion XE console replaces one that has been torn or lost.

This rackmount kit is an accessory for your Net3 Conductor Gateway that allows you to mount it on a standard rackmount.

This dust cover from ETC is designed to fit perfectly on your CS40 ColorSource console.

...

ETC's DPJ-10 is a 10 ft. Powercon male to female fixture to fixture power-thru jumper cable. This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.

This dust cover from ETC is designed to fit perfectly on your CS20 ColorSource console.

 

The N4086 from ETC is an RJ45 DMX terminator.