Klover MiK 26 with Case Dual MiK 26" Parabolic Collectors with Road Case

The Klover MiK 26" parabolic collector extends the pickup range of your microphone to over 500 feet. And the Mik 26 Dual with case package was designed to have you up and running out of the box at a cost below that of the individual components. The kit includes two Mik 26 collectors, two sets of handles, two handle cross bars, two microphone yokes with adapters, two neck straps, and a road case for the entire package!

The industry-standard MiK 26 is the venerable model seen every Sunday on football fields across America so you know it's broadcast ready. Safety is paramount at Klover so the MiK 26 is built from carbon fiber that cushes upon impact leaving no sharp or brittle pieces. Plus, all protruding studs have been removed from the front of the dish.

The Klover Mik 26 is designed from a highly reflective ballistics-grade plastic resulting in a full-range audio signal. Vibration insulation bushings have been added to all attachments and handles to eliminate operator transferred noise.

The KK-26 2W road case fits one or two un-assembled Klover MiK 26. There are compartments for all of the KM-26 components, as well as preamps and headphones. A pull-out handle and roller wheels are included for easier transport. (Approximate dimensions: 33″ x 30″ x 18″)

Klover MiK 26 with Case Applications:

Broadcast

Sound reinforcement

Law enforcement

Klover MiK 26 with Case Includes:

• Qty (2) Dish Assemblies
• Qty (2) Handles (Left Hand & Right Hand)
• Qty (2) Handle Cross Bars (Rear)
• Qty (2) Microphone Yokes with Lavaliere Mic Adapter [7/8 inch (22.2mm) max mic diameter]
• Qty (2) Neck Straps
• Qty (1) KK-26-2W Road Case (Approximate dimensions: 33″ x 30″ x 18″)

Klover MiK 26 with Case Specifications:

• Range: 500 to 600 feet in ideal conditions
• Amplification: Approximately 48 X
• Dish Outside Diameter: 26 inches
• Collector Diameter: 24 inches
• Weight: Approximately 7.5 pounds
• Collector Dish Thickness: 1/4 inch
• Frequency: 40 Hz to 20 kHz (dependent on microphone used)
• Focus Point: 2-1/4 inches behind the inner face of mic mounting hub or 4 inches behind the front flange of the dish
• Pickup Pattern: Approximately conical (15 degrees off center)
• (See “Test Results” tab below)
• Microphone: Omnidirectional mic (lapel mics up to 5/16 inch in diameter or cylindrical/pencil mics 3/4 to 7/8 inch in diameter)
• Mounting Options: intended to be handheld
• Accessory Mounting: the optional monopod mount allows the unit to be mounted on a tripod or monopod