Audio Press Box APB-D216-R-D Active, RACK, 2Ch Dante/Line In,16 LINE/MIC Out, Out for Exp

The AudioPressBox APB-D216-R-D is a 2-channel active drive unit that features 2 Analog Dante inputs with a high-quality digital-to-analog converter. It is also switchable between Line or Dante input. There are 16 Line/MIC Level Outputs on the front and one output for expanders in the back. The front outputs are balanced and individually transformer-isolated with selectable output levels for each output. The signal processing can be utilized like a high-pass filter and compressor with a limiter to achieve the perfect audio signal for all connected devices. AudioPressBox Dante products use Power over Ethernet (PoE). Power can be provided through the Ethernet cable from a PoE-capable network switch, or from a separate PoE injector.

Note: If using a PoE injector, it must be IEEE 802.3af compliant. Use of a non-compliant PoE injector can terminally damage the device and may void the warranty.

Drive unit for : APB-008 SB-EX, APB-008 IW-EX, APB-008 OW-EX, APB-008 FB-EX, APB-024 R-EX, APB-P008 OW-EX, APB-P008 IW-EX, APB-P112 SB-EX

Audio Press Box APB-D216-R-D Features:

• 2 Balanced LINE Inputs – XLR / 6.3mm JACK
• 2-channel DANTE input with high-quality digital-to-analogue converter
• You can switch between Line or Dante input, depending on your needs.
• 16 High quality balanced, individually transformer isolated outputs
• Each Output is switchable between MIC or LINE level
• Switchable High-Pass filter for each Input channel
• Switchable Compressor and Limiter for each Input channel
• 2 separately buffered Outputs that can drive 6x APB-008 or 2x APB-024 Output expanders
• Maximum drive capacity is 48 Line/MIC Outputs.
• Total maximum of 16+48 Line/MIC Outputs.

Audio Press Box APB-D216-R-D Specifications:

• Type: 2 in 16 out
• Groups: 2
• Inputs: 2 (Line or Dante)
• Input connectors: Balanced, XLR / 6.3mm JACK, RJ45-Dante
• Max. input level: Line: +32/+2 dBu
• Input Impedance: >5kOhm
• Outputs: 16 Line/MIC level, 2 buffered outputs for expanders (max 48 Line/MIC outputs)
• Output connectors: Balanced, XLR
• Nominal Output Level: +6dBu (front outputs)
• Maximum Output Level:
• Output impedance:
• Transformer isolated outputs: Yes (each output)
• SNR:
• Frequency Response: 20/160Hz (filter) to 36kHz/-3dB (front outputs)
• Controls: Input gain, Dante switch, High-pass filter, Compressor, Output PAD
• Indicators: Input clip, Dante, Output level, Gain reduction, Power
• Power Supply: 24V DC, 1A external adaptor
• Dimensions (WxHxD): 2 RU, 480x135x90mm
• Weight: 3460 g