Product Overview
The AVN-DIO14, a part of the Sonifex DIO series, acts as a converter between Dante and analog XLR stereo for both input and output. This device comes with two balanced analog XLR inputs, two balanced analog XLR outputs, and a Neutrik etherCON connector, facilitating a straightforward link to a Dante AoIP network.
Sonifex AVN-DIO14 Specifications:
- Analogue XLR Input / Output Pin-out:
- Pin 1: Chassis Ground
- Pin 2: Phase
- Pin 3: Non Phase
- Line Inputs - XLR:
- Input Impedance: 5kΩ Unbalanced
- 0dBFS Line-Up: Selectable +12/+18/+24dBu
- Frequency Response: 20Hz to 20kHz, +0/-0.2dB (ref 1kHz)
- THD+N: Less than -118dBFS, -12dBu (+18dBu=0dBFS mode), 20Hz to 20kHz, 20kHz BW
- Dynamic Range: 120dB, 20kHz BW, Rs=200Ω
- Cross Talk: Less than -110dB
- Common Mode Rejection: >60dB @ 1kHz
- Line Outputs - XLR:
- Output Impedance: Less than 200Ω balanced
- 0dBFS Line-Up: Selectable +12/+18/+24dBu
- Frequency Response: 20Hz to 20kHz, +0/-0.5dB (ref 1kHz)
- THD+N: Less than -100dBu, -30dBFS, 20Hz to 20kHz, 20kHz BW
- Dynamic Range: 120dB, 20kHz BW
- Cross Talk: Less than -110dB
- Network and AoIP:
- AoIP Standard: Dante
- Channels: 2 transmit, 2 receive
- Flows: 2 transmit, 2 receive
- Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz
- Encoding: PCM 16, PCM 24, PCM 32
- AES67 Support: Yes
- Connectivity: etherCON (RJ45 compatible)
- Speed: 100Mbps
- Dante Domain Manager Ready: Yes
- Clock Source: Internal (PTP Leader) or Network PTP Leader
- PoE Power:
- Standard: 802.3af
- Class: 0
- PD Power Range: 0.44 W to 12.94 W
- Typical PSE Power Usage: 6 W
- Max PSE Usage: 15.4 W
- Equipment Type:
- AVN-DIO14: Dante® to XLR Analogue Stereo Input & Output converter
- Physical Specification:
- Dimensions (Raw): 14.0cm (W) x 13.6cm (D) x 4.2cm (H), 5.5” (W) x 5.4” (D) x 1.7” (H)
- Dimensions (Boxed): 17.8cm (W) x 17cm (D) x 5.6cm (H), 7.0" (W) x 6.7" (D) x 2.2" (H)
- Weight: Nett: 0.42kg Gross: 0.56kg, Nett: 0.95lbs Gross: 1.25lbs
