Meyer Sound MM-10ACX-5 10" Active Subwoofer, 5-Pin Input

Meyer Sound MM-10ACX-5 10” Active Subwoofer, 5-Pin Input

The MM-10ACX-5 miniature subwoofer provides low frequency for applications requiring exceptional audio quality from a compact system. It was designed as a companion to Meyer Sound’s MM-4XP miniature loudspeaker and UP-4XP ultra compact loudspeaker and allows system designers to create full-range systems where space is limited.

The MM-10ACX-5 bass reflex cabinet houses a single 10-inch driver and a single-channel amplifier with onboard processing, including a crossover, driver protection, and frequency and phase correction. The amplifier includes DC power and audio routing for driving satellite loudspeakers – up to two MM-4XP’s or a single UP-4XP (due to its higher power requirements). Multiple input signal combinations are available with 3 XLR inputs, two for the satellite speakers and one for the subwoofer. Outputs to the satellite speakers can specified as either 5-pin male Phoenix or 5-pin female EN3 type.

Meyer Sound MM-10ACX-5 Includes:

• Meyer Sound MM-10ACX-5

Meyer Sound MM-10ACX-5 Features:

• Powerful low-frequency response from a very small cabinet
• Low distortion affords exceptionally clean bass
• Adaptable to complement MM‑4XP, UP‑4XP and UP4-slim loudspeakers
• Versions include external IntelligentDC power supply or built-in AC power for driving satellite loudspeakers

Meyer Sound MM-10ACX-5 Specifications:

• Operating Frequency Range: 33Hz – 228Hz
• Frequency Response: 35Hz- 208Hz ± 4dB
• Phase Response: 38Hz – 138Hz ± 45°
• Max. SPL: 123dB
• Coverage: 360°
• Dynamic Range: < 100dB
• Transducer: 10-inch cone driver with neodymium magnet, 4-ohm nominal impedance, 2-inch voice coil
• Power handling: 400W (AES)
• Input Impedance: 10k ohm electronically balanced
• DC Blocking: 4.8Hz high pass
• Input Level: requires + 16dB (6.3V RMS, 9V peak) into 600 ohms for maximum SPL
• Amplifier: Class-D 220W RMS, 440W peak, 0.02% THD, convection cooling
• Audio Connector: XLR female inputs (1 subwoofer, 2 satellite)
• AC power connectors: PowerCon with loop output
• Power requirements: 100-240VAC, 50/60Hz
• Enclosure: Multi-ply hardwood with textured black finish
• Grille: Hex-stamped steel with black mesh screen
• Dimensions: 19” wide x 11” high x 12” deep (483mm x 279mm x 305mm)
• Weight: 27 lbs. (12.25 kg)