Universal Audio UNA-SD-1 Dynamic Vocal and Instrument Microphone

After decades of crafting some of the most revered audio processing hardware in existence, Universal Audio introduces the SD-1 dynamic vocal and instrument microphone. The SD-1 captures studio-quality broadcast-ready audio wherever you record.

A cardioid pickup pattern rejects sound originating from the back and sides, putting the focus where you point it. The SD-1 is ideal for close-miked vocals and offers a switchable articulation boost between 3 and 5 kHz where the human voice sits. There's also a selectable low cut filter to reduce rumble from various sources like the truck in the alley.

The SD-1 also makes a great live performance microphone thanks to its cardioid pattern and internal shockmount that rejects noise transferred from mic stands. A built-in windscreen hepls reduce plosives (hard consonants) and breath noise when you're going all in for the performance.

If you have an Apollo interface (sold separately) you can download UA mic presets for free to use with your SD-1.

Universal Audio UNA-SD-1 Applications:

• Recording
• Live performance
• Podcasting
• Live streaming

Universal Audio UNA-SD-1 Features:

• Dynamic studio vocal microphone with low cut and articulation boost
• Cardioid polar pattern rejects off‑axis sounds and room noise
• Flat frequency response (50 Hz–16 kHz) for natural‑sounding recordings
• Shape vocals and instruments with SD‑1 Apollo Channel Strip Presets
• Internal shockmount reduces low‑end rumble and mechanical noise
• Rear-mounted XLR jack for easy cable management
• Built-in windscreen reduces plosives and breath noise
• Quality UA craftsmanship and stylish, rugged build

Universal Audio UNA-SD-1 Specifications:

• Model: Universal Audio Standard Dynamic Model One / SD-1
• Microphone Type: Dynamic
• Polar Pattern: Cardioid
• Frequency Range: 50 Hz - 16 kHz
• Sensitivity: -58 dB (1.3 mV) ref 1V at 1 Pa, 1 kHz
• Output Impedance: 200 Ohms
• Recommended Load Impedance: > 1 K Ohms
• Adjustable Controls: Low Cut Filter (200 Hz): Off, On
• Articulation Boost (3 - 5 kHz): Off, On
• Connector: 3-pin XLRM
• Included Accessory: 5/8" to 3/8" Thread Adapter
• Dimensions (Microphone Only): 7.68" (195 mm) length, 2.36" (60 mm) diameter
• Weight (Microphone Only): 1.6 lbs (735 g)