Evertz 5700MSCIP2PSSDITGAUX Master Sync Generator for an IP or Hybrid Facility

Master Sync Generator for an IP or Hybrid Facility

+2PS Redundant Power Supply Option

+SDI–TG 4 outputs, configurable SD/HD/3G SDI Test/black generators

+AUX Includes expansion test module which provides AES & Analog audio test generator, DARS, GPIO, and LTC output

Evertz 5700MSCIP2PSSDITGAUX Features:

• Oven Controlled Crystal Oscillator (OCXO) with 0.01ppm free run stability for ultra-stable timing accuracy and reference signal generation
• IP network grandmaster clock
• for NTP, PTP (SMPTE 2059-2, AES67 and IEEE1588 Annex J), PCR
• 6x independently timeable sync outputs and 4x optional SDI test generator outputs (+SDI–TG), supports SD/HD/3G SDI
• Optional 10GbE video test generator support (+10G–TG),(SFPs not included)
• Configurable to run in Boundary Clock Mode for larger enterprise scale network designs (with an upstream PTP Grandmaster)
• GNSS (GPS, GLONASS) referenced system — outdoor antenna and 50ft cable provided, more options available
• Optional Dual Band (L1 and L5)
• GNSS receiver supporting GPS, GLONASS, Galileo and Beidou satellite constellations
• Contact closure output for critical warning
• Optional AES and analogue audio test generator, LTC, DARS and GPIO functionality (+AUX)

Evertz 5700MSCIP2PSSDITGAUX Specifications:

• Analog Sync Outputs:
• Standards:
  • Black Burst: SMPTE ST170 (NTSC–M), ITU–R BT.1700–1 (PAL–B)
  • Bi–Level: Slo–Pal 625i/48, 625i/47.95, 480p/59.94
  • HD Tri–Level: SMPTE ST274 (1080p/23.98, 1080p/24,
  • 1080i/50, 1080i/59.94,
  • 1080i/60, 1080p/23.98sF,
  • 1080p/24sF, 1080p/25,
  • 1080p/29.97, 1080p/30,
  • 1080p/50, 1080p/59.94,
  • 1080p/60); SMPTE
  • ST296 (720p/59.94, 720p/60, 720p/50, 720p/30, 720p/24)
• Pulse Signals: PAL color frame, 1Hz pulse, IRIG DATUM 1/1.001Hz pulse, 6/1.001Hz pulse
• CW Signals: 5MHz, 10MHz, NTSC–M subcarrier, PAL–B subcarrier
• Wordclock: 48kHz wordclock level
• 5V CMOS (1kΩ) or ± 1V (75Ω)
• 10MHz Output: 1.0V p–p, 2.0V p–p, in 75Ω, SNR > 70dB rms SFDR > 50dBc
  • Connector: 75Ω HD–BNC
  • No. of Outputs: 6
  • DC Offset: 0V ± 0.05V
  • Return Loss: > 40dB up to 10MHz
  • SNR: > 75dB rms
  • Output Levels: 1.0V p–p, 2.0V p–p, in 75Ω, selectable
• GPS/GLONASS Receiver:
  • Temperature: -40 to 70°C
  • Humidity: 95% relative humidity, condensing at 60°C
• 1000BASE–T Timing Network:
  • Quantity: 2
  • Network Type: IEEE 802.3 (10BASE–T),
  • IEEE 802.3u (100BASE–TX), IEEE 802.3ab (1000BASE–T)
  • Connector: RJ–45
  • Timing: NTP, PTP (SMPTE 2059-2, AES67 and IEEE1588 Annex J), PCR
• 10GbE Timing Network:
  • Quantity: 2
  • Network Type: IEEE 802.3ae (10GbE)
  • Connector: SFP (not included), LC/UPC
  • Timing: NTP, PTP (SMPTE 2059-2, AES67 and IEEE1588 Annex J), PCR
• Genlock Input (Video/10MHz Selectable):
  • Type: Auto–detects standard
  • SMPTE ST170 (NTSC–M),
  • ITU–R BT.1700–1(PAL–B), color black 1V p–p with optional VITC and 10–field pulse HD tri–level sync (same HD standards as sync outputs)
  • No. of Inputs: 2x loop–thru high impedance, isolated, differential external termination required
  • Connector: 75Ω HD–BNC
  • Return Loss: > 40dB to 10MHz (with external 75Ω termination)
• Input Level Range:
  • Video: -3.5dB (double terminated) to +6dB (un–terminated)
  • 10MHz: 0.3V p–p to 4.0V
• Frequency Lock Range:
  • Wide Mode: ± 15ppm min.
  • Narrow Mode: ± 0.1ppm min.
• SDI Test Generators (with +SDI–TG or +10G–TG option):
  • Standards: SMPTE ST259–C
  • (270Mbs), ST292–1 4:2:2, ST372 dual link, ST424; quad link ST292–1 4:2:2, quad link ST424 4:2:2; ST425–3 dual link 3Gb/s, ST425–5 quad link 3Gb/s
  • No. of Outputs: 4
  • Embedded Audio: Up to 4x audio groups as specified in SMPTE ST
  • 299–1 or SMPTE ST272; selectable tone frequencies (from 20Hz to 12kHz) and audio group
  • Connector: 75Ω HD–BNC
  • Signal Level: 800mV nominal drive
• DC Offset: 0V ± 0.5V
  • Rise/Fall Time: 100ps HD/3G, 600ps SD
• Overshoot: < 10% of amplitude
  • Jitter: < 0.2 UI
• Return Loss: > 15dB to 1.5GHz
  • > 10dB to 3GHz
• Electrical:
  • Voltage: Auto–ranging
  • 100–240V AC, 50/60Hz
  • Configuration: Optional redundant supply available
  • Power: 125W (all options installed)
  • Safety: CAN/CSA-C22.2 No. 62368-1:14 UL 62368-1 2nd Ed.
  • EMI/RFI: Complies with FCC part 15, Class A; complies with EU EMC directives
• Physical:
  • Dimensions: 19” W x 1.75” H x 11.5” D (483 x 45 x 292 mm)
  • Weight: 8lbs (3.5kg)