Datavideo DDC-2512 DC to 12VDC, 2.5A Converter

The DDC-2512 DC to DC 12V 2.5A Converter from Datavideo is an alternative option to supply power to third party cameras or AV equipment. The DDC-2512 is primarily designed to be used with the Datavideo PD-3 Power Distribution unit and CB-23 All-in-one cable. This converter automatically accepts input voltages between 9 and 30 V DC to provide a regulated 12V DC output. The unit can allow for 4pin XLR type input connections and has a 4pin XLR type DC output connection.

NOTE: This product is NOT water or weather proof. Datavideo recommend that this product be used indoors.

Features

• Supplies power to third party cameras or AV equipment
• Designed to be used with the Datavideo PD-3 Power Distribution unit and CB-23 All-in-one cable
• Automatically accepts input voltages between 9 and 30 V DC to provide regulated 12V DC output

Specifications

• Input:
  • Voltage Range: 9V~30V DC
  • Efficiency (Typ.): UP TO 85%
• Output:
  • DC Voltage: 12V
  • Voltage Tolerance: ±3%
  • Rated Current: 2.5 A
  • Current Range: 0~2.5 A
  • Rated Power: 30W
  • Ripple & Noise (max): < 400mV
• Protection:
  • Over Load: 105%~150% rated output power
  • Protection type: Recovery automatically after fault condition is removed
• Connector:
  • DC Input 4 Pin XLR Male: PIN1:GND, PIN2/3:NC, PIN4:DC IN
  • DC Output 4 Pin XLR Female: PIN1:GND, PIN2/3:NC, PIN4:DC OUT
• Environment:
  • Working TEMP: 32°F to 102°F (0°C to 40°C)
  • Working Humidity: 10% to 90% (non condensing)
  • Storage Temp. Humidity: -40°F to +185°F (-40°C to +85°C), 10~95% RH