Product Overview
Auralex RSIC-1-ALX Resilient Channel Sound Isolation Clip
Resilient Sound Isolation Clips (RSIC) are used for vibration control of structure-borne noise and are helpful in isolating ceilings and walls to reduce airborne noise transmission. The RSIC-1 is designed to decouple the gypsum board from the underlying structure (wood, steel, concrete) to minimize sound and vibration.
Size: 3” x 1-1/4 x 1-7/16”
Auralex RSIC-1-ALX Includes:
- Resilient Sound Isolation Clip
Auralex RSIC-1-ALX Features:
- For use in wall and ceiling construction assemblies
- Reduces sound and vibration
- For use in new and retrofit construction
Auralex RSIC-1-ALX Specifications:
- Size: 3″ x 1-1/4″ x 1-7/16″ nominal
- Construction: Natural and manufactured rubber molded to isolate ferrule (zinc-electroplated steel) from 16 gauge galvanized or aluminum-zinc coated clip. Minimum of 12 micro-vibration controlling pedestals at point of contact with framing member.
- Projection: 1-5/8 inches from supporting structure, when 7/8-inch drywall furring channels are used.
- Intended use: For use with wall and ceiling construction assemblies to prevent sound and vibration transmission to improve STC and IIC ratings
- Dead or Shear Load: Maximum design load of 36 pounds per each resilient sound isolation clip.
- Total Deflection: 3 mm
- Double Deflection: Yes (1.5 mm)
- Recycled content: Yes
- Low VOC treated: Yes
- Manufactured to ASTM D 2000, M2 AA 510 A13, which includes:
- Hardness ASTM D 2240, Shore A: 47
- Modulus 3000 Percent, ASTM D 412, Die C: 5.3 MPA
- Tensile Strength, ASTM D 412, Die C: 11.2 MPa.
- Elongation at Break, ASTM D573: 454 percent
