Product Overview
The ClearOne BMA CT 24" is an innovative ceiling tile beamforming microphone array that seamlessly integrates with drop ceilings. With built-in acoustic echo cancellation, noise cancellation, and beam selection capabilities, it eliminates the need for per-beam processing in a DSP mixer, simplifying system design, installation, and operation while conserving rack space. It supports larger conference setups by allowing up to three interconnected ceiling tiles using P-Link technology, providing a total cable reach of 1950 feet. The streamlined configuration process with Pro Console software eliminates the need for separate component setup, enhancing efficiency in setting up the system.
ClearOne 910-3200-208-U Includes:
- ClearOne BMA CT 24" Ceiling Tile Beamforming Mic Array for Converge Pro 2 (White)
- Limited 3-Year Manufacturer Warranty
ClearOne 910-3200-208-U Features:
- Integrated Design Reduces Complexity
- Simple to Install and Setup
- Single Workflow Pro Console Software
- Daisy-Chain Three Tiles via P-Link
- Supports Distances up to 650'
- 24 Microphones in 5 or 6 Beams
- Noise & Acoustic Echo Cancellation
- Automatic Level Control + 5 Filter Types
- PoE - Power over Ethernet
ClearOne 910-3200-208-U Specifications:
- Microphone:
- 24 Microphones
- Channel In: 1 (Uses P-Link Channels or C-Link Channels for Speakers, No Input Channels in CP2)
- Number of Beams: Two patterns, either 5 or 6 Beams
- Polar Pattern: Custom
- Frequency Response: 150 Hz to 16 kHz, ±3 dB
- Dynamic Range: 150 Hz to 16 kHz, >70 dB
- Amplifier Output:
- Type: 0.2 in / 5.1 mm Black Header, Male, Phoenix-Type Euroblock
- Audio: 2 Channels
- Frequency Response: 20 Hz to 22 kHz at +10 dBu, ±0.5 dB
- THD + Noise: 20 Hz to 22 kHz at +10 dBu, 1 W, < 0.2%
- Dynamic Range: 20 Hz to 22 kHz at +20 dB, >102 dB, with 20 kHz Digital Low-Pass Filter
- Crosstalk: Channel to Channel, Stimulus at +20 dBu to Receptor 10 W Output, 8-Ohm Load, 20 Hz to 22 kHz, < 60 dB
- LED:
- LED Indicator on One End of Unit: 4 Mute/Unmute Configuration with 8 Color Options, Two Blink Patterns and Warning Indications
- Configuration:
- Beam Enable/Disable
- Acoustic Echo Cancellation (AEC) On/Off
- Noise Cancellation (NC) On/Off
- Filters:
- All Pass
- Low Pass
- High Pass
- Notch
- PEQ
- Automatic Level Control (ALC) On/Off
- Gain Adjust
- Mute On/Off
- Auto Gate/Manual Gate
- Link:
- P-Link In & Out: Proprietary Network
- Ports Type: RJ-45
- Cable: RJ45 Cat 5e/6, Expandable
- Distance: Up to 600 ft / 182.9 m
- Daisy-Chain: Up to 3 Array Units and Additional P-Link Compatible Devices with Each Supported CONVERGE Pro 2 Unit in the Same Chain
- Up to 6 Array Units in the Same Chain with 2 Supported Converge Pro 2 Units Connected through C-Link
- Long-Distance P-Link: Increases P-Link Distance from 200 ft / 61 m to 600 ft / 182.9 m Max Cable Distance Between Any Two Units; Cat 6, 550 MHz, 23 AWG, Solid Conductor Cable; Do Not Use Copper Clad Aluminum (CCA) Cable
- Power Switch:
- Type: Slide Switch
- Slide Toward P-Link to Power Device by P-Link
- Slide Toward PoE to Power Device by PoE Injector
- Software:
- Power and Thermal:
- Power Type: PoE
- Port Type: RJ-45
- Power Source: PoE Injector or Equivalent
- PoE: IEEE802.3at Compliant Devices Providing 56 V and 640 mA (36 W)
- P-Link In - Mode B
- PoE In - Mode A and Mode B
- (Each BMA CT Requires Its Own 802.3at Compliant Power Injector if Loudspeakers are Being Used
- Power Consumption:
- 100-240 VAC, 50/60 Hz
- 9.1 W Typical without Speaker Amp
- 38 W at Max Power 1 kHz (2 x 10 W)
- Thermal: 130 BTU/Hr at Max Power
- Operating Temperature: 14 to 104 °F / -10 to 40 °C Ambient Temperature
- Dimensions: 23.7 x 23.7 x 2.1 in / 602.5 x 602.5 x 54.1 mm
- Weight: 9.12 lb / 4.14 kg