Product Overview
The DTD-TN is the NEXO dedicated installation advanced speaker control processing device with Dante. Designed based on the NEXO NXAMP, the DTD-TU comes as a compact, rack-mounting device with all connectors (except mini-USB on the rear barrier strip. All settings including crossover control, EQ, and time-alignment, are controlled from an external computer via the USB port. With no onboard controls, settings can be locked preventing accidental changes.
Nexo DTD-TN Features:
- Speaker controller for PS and LS series, providing digital processing from the NXAMP technology (Crossover, EQ, time alignment, and speaker protection)
- High-end balanced stereo analog inputs, AES input, USB input, and Dante
- High-end balanced analog outputs for PS (Stereo) and LS (mono sum)
- Automatic amplifier sensing with no setting required from the user
- Dedicated Install version
Nexo DTD-TN Specifications:
- Sampling frequency and resolution: 48/96 KHz, 64 bits internal processing precision
- Signal delay: Less than 1 ms (analog in to out) on flat setup, compatible with NXAMP latency
- Frequency response: 20 Hz to 20 KHz, +/-0.5 dB (mains out), 20 Hz to 2 KHz +/-0.5 dB (sub out)
- Total harmonic distortion: Less than 0.001% (mains out), less than 0.02% (sub out)
- Dynamic range: 112 dB (unweighted, mains out), 107 dB (unweighted, sub out)
- Crosstalk / Channel separation: -100 dB (1KHz)
- Indicators: Input signal/peak (green/red), amp in signal (green), speaker protect (yellow)
- Display: White backlight graphical OLED display 96 x 16 pixels
- Analog Inputs:
- Number of channels: 2 electronically balanced analog inputs
- Connectors: (2) terminal block (3-pin / 2.54 mm pitch)
- Sampling frequency and resolution: 96 KHz / 24 bits
- Max. input level / Input impedance: +22 dBU / 20 Analog Outputs:
- Number of channels: 3 electronically balanced analog outputs
- Connectors: (3) terminal block (3-pin / 2.54 mm pitch)
- Sampling frequency and resolution: 48/96 KHz, 24 bits
- Max. output level / Output impedance: + 22 dBU / 200 Ohms
- Amplifier Sensing Inputs:
- Number of channels: 4 floating electronically balanced high voltage analog inputs
- Connectors: 1 x terminal block (8-pin / 5.08 mm pitch)
- Sampling frequency and resolution: 48/96 KHz, 24 bits
- Max. input level / Input impedance: +50 dBU (8000 Watts / 8 Ohms) / 364 KOhms
- AES Inputs:
- Number of channels: 1 AES/EBU stereo digital input
- Connectors: 1 x terminal block (3-pin / 2.54 mm pitch)
- Sampling frequency and resolution: 44.1 to 96 KHz / 16, 20 or 24 bits
- Dante Input:
- Number of channels: 2 x Dante channels
- Connector: 1 x RJ45
- Sampling frequency and resolution: 48-96 KHz / 24 bits
- USB Input:
- Type: 2 channels of USB audio
- Connector: Female mini USB connector type B
- Sampling frequency and resolution: 48 KHz / 16 bits
- Remote Control Connector (DTD-I-N): Mini USB + RJ45
- Dimensions (W x H x D): 480 x 44 x 65 mm, 1U
- Weight: 90 V - 240 V 50/60 Hz
- Power consumption: 20 W max
- Heat dissipation (per hour): 20 Kcal max
- Operating temperature range: 0°C - 40 °C
- Storage temperature range: -20 °C - 60 °C
