Product Overview
Responding to the various needs of the contractor market and professional audio scene, TASCAM's MM-2D is a compact converter that converts 2-channel Mic/Line input/output signals into Dante signals. Available with EuroBlock connectors (Model MM-2D-E) and XLR connectors (Model MM-2D-X) is half the size of a standard 1U rack, the MM-2D series is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers.
Power is provided to the MM-2D via PoE (power over ethernet), however, if PoE is not used, the unit must be powered with the PS-P122OE, which is available separately.
Includes
- Main unit × 1
- Installation brackets × 2
- Euroblock plugs (MM-2D-E only) × 4
- Cable band kit (MM-2D-E only) × 1
- Owner’s Manual (including warranty) × 1
Features
- Phantom power and remote gain control compatible Mic pre-amps
- TASCAM studio quality Mic pre-amps installed
- Compressor, 4 parametric EQ, auto level, and more effects included
- Built-in 6 in / 4 out matrix mixer
- 10 band EQ and a variety of output effects included
- Input/output routing
- Supports Dante Domain Manager, and AES67 Mode
- Mic Pre-amps supporting +48V Phantom Power and Remote Gain Control
- High quality and high performance Mic Pre-amps
- 50 Scene presets triggered by SNTP-based Timer events
Specifications
- Formats and channels: 44.1/48/88.2/96kHz,16/24-bit, 2 channels
- DATA/DATA+PoE connectors:
- Connector: RJ-45
- Transmission protocol: Dante
- Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)
- Cables: category 5e or faster STP cables
- ANALOG IN connectors:
- MM-2D-E: Euroblock (balanced) 3.8mm pitch
- MM-2D-X: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
- Minimun input level: -74dBu
- Maximum input level: +26dBu
- Input impedance: 2.0kΩ or higher
- ANALOG OUT connectors:
- MM-2D-E: Euroblock (balanced) 3.81mm pitch
- MM-2D-X: XLR-3-32 (1: GND, 2: HOT, 3: COLD)
- Nominal output levels:
- +4dBu (when Ref. Level not -9dBFS)
- +6dBu (when Ref. Level set to -9dBFS)
- Maximum output level (switchable):
- +15dBu (Ref. Level: -9dBFS)
- +18dBu (Ref. Level: -14dBFS)
- +20dBu (Ref. Level: -16dBFS)
- +22dBu (Ref. Level: -18dBFS)
- +24dBu (Ref. Level: -20dBFS)
- Output impedance: 200Ω or lower
- Audio performance (MIC IN - DANTE OUT / DANTE IN - LINE OUT):
- Mic Amp EIN*: –125dB or less (*Input referred noise)
- Frequency response:
- 20Hz - 20kHz (Fs=44.1kHz/48 kHz)
- (±0.5dB) 20Hz - 40kHz (Fs=88.2kHz/96 kHz)
- THD (THD+N): 0.005% or less
- Signal-to-Noise ration: 105dBu or higher
- Cross talk: 105dBu or higher
- Dynamic range: 105dBu or higher
- Operating power:
- PoE Class0
- Optional AC Adapter (PS-S1220E)
- Power consumption: 6W
- Dimensions (W x H x D):
- 8.43 x 1.75 x 5.36in. (214 x 44.45 x 136.1mm) (inc. protrusions)
- 9.96 x 1.75 x 5.36in. (253 x 44.45 x 136.1mm) (with bracket)
- Weight: 1.94lbs (878g)
- Operating temperature: 32 to 104°F (0 to 40°C)