Clear-Com CC-110-B6 Lightweight Single Ear Headset, Unterminated

The CC-110-B6 features a dynamic cardioid microphone offering rejection of off-axis sounds generated from the back and sides in noisy environments. The integrated temple pad and adjustable headband were designed to provide comfort during long periods of use. This light-weight single-ear closed-back headset comes with a removable cable, allowing for quick connector changes or in the field repairs. For convenience, the CC-110s flexible boom arm acts as an on/off mute by simply moving the arm up or down. The boom arm can also be rotated so you can wear the headset on the left or right side for flexibility. You'll also get both leatherette and foam earpads, so you can tailor the earcup to your situation and comfort level.

The B6 designation means this headset arrives without a connector.

Features

• Light-weight
• Cardioid microphone for off axis rejection
• Closed-back on-ear design
• flexible mic boom arm
• Interchangeable cable
• Boom arm acts as an on/off mute switch
• Comes with both leatherette and foam earpads

Specifications

• Headphone
  • Type: Closed-back
  • Driver: 36mm diameter, neodymium magnet, copper-clad aluminum wire voice coil
  • Frequency Response: 20Hz v- 20kHz
• Microphone
  • Element: Dynamic
  • Driver: 15mm, neodymium magnet
  • Polar Pattern: Cardioid
  • Frequency Response: 250Hz – 20kHz
  • Sensitivity
  • Open Circuit Sensitivity: -64 dB ±3.5 dB; at 1kHz, typical
  • 99 dB ±3 dB (SPL); at 1kHz typical
• Power
  • Maximum: 500mW
• Connector
  • Cable: 5ft (1.55m) long with 8-pin connector at headset end;
• Impedance
  • 400 ohms ±30%; at 1kHz typical
• Dimensions
  • Packaging for CC-110:
  • 6.7 x 8 x 3.5 in (WxHxD)
  • (170 x 205 x 90 mm)
• Weight
  • 5.1 oz (145g) without 8-pin cable assembly and M3*18mm SCREW