DPA 2028-B-B01 2028 Supercardioid Vocal Microphone, Wired

Built for life on the road, the 2028 Supercardiod Vocal Microphone from DPA is designed for the unique challenges of live stage performances. Its a flexible handheld vocal mic, which provides transparent, fantastic vocals to performers from a wide range of markets including live, houses of worship, and broadcast applications - as well as an attractive option for rental companies, content production companies and, of course, singers.

Just plug it in and hear the vocals shine like never before. The 2028 sports a fixed-position capsule, as well as a specially-designed shock mount and pop filter. It exhibits a supercardioid polar pattern, with the famous DPA uniform off-axis response. This gives the microphone a very high-gain-before-feedback and makes it easier to handle bleed from other instruments in close proximity, picking up sound in a natural way.

On a live stage, the 2028 will deliver the same open and transparent sound that other DPA microphones deliver. In fact, it needs no (or very little) EQ to sound just like you are standing next to the singer listening to their performance. This allows the singer to use their voice just as if no mic was present, which puts less strain on them. In addition, it allows sound engineers to spend their time shaping the sound experience rather than covering up due to artifacts. This amazing transparency is unique for DPA vocal mics.

DPA 2028-B-B01 Features:

• Renowned DPA sound
• Natural vocals – from folk to metal
• Reduces feedback issues
• Rugged enough for the live stage
• Uniform supercardioid directionality
• Extreme SPL handling

DPA 2028-B-B01 Specifications:

• Directional pattern: Supercardioid
• Principle of operation: Pressure gradient
• Cartridge type: Pre-polarized condenser
• Effective frequency response: 20 Hz - 20 kHz
• Frequency range, ±2 dB, at 12 cm (4.7 in): 100 Hz - 16 kHz. Permanent 3rd order low-cut filter at 80 Hz
• Sensitivity, nominal, ±3 dB at 1 kHz: 5 mV/Pa; -46 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 22 dB(A) re. 20 µPa (max. 23 dB(A))
• Total harmonic distortion (THD): < 1% up to 139 dB SPL peak
• Dynamic range: Typ. 117 dB
• Max. SPL, peak before clipping: 160 dB
• Output impedance: 150 Ω
• Minimum load impedance: 1 kΩ
• Cable drive capability: 328 ft (100 m)
• Output balance principle: Impedance balancing with Active Drive
• Common mode rejection ratio (CMRR): > 50 dB at 1 kHz
• Power supply (for full performance): 48 V Phantom power (±4 V)
• Current consumption: Max 2.5 mA
• Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• Weight: 10.1 oz (286 g)
• Diameter: 1.9 in (48 mm)
• Capsule diameter: 0.75 in (19 mm)
• Microphone length: 7.4 in (188 mm)
• Maximum output voltage, RMS: 9 Vrms; 19 dBV; 28 dBu
• Polarity: +V at pin 2 for positive sound pressure