Audient ID14-MKII 2 Channel USB2 Interface and Monitoring

Audient ID14-MKII 2-Channel USB2 Interface and Monitoring

The ID14-MKII features an Audient Console Mic Preamp on each of the two mic inputs. This is the same circuit found in their ASP8024-HE recording console and is designed to provide ultra-low noise and low distortion with a hint of analog warmth. A 1/4" instrument input is also provided and features JFET circuitry designed to duplicate the input stage of a classic tube amplifier.

Audient’s class-leading converters capture every detail of your audio with an amazing 126dB of dynamic range for the best sound quality possible. Monitoring options include four line outputs to feed 2 pairs of powered speakers or external amplifiers. and two headphone outputs, 1/4" TRS and mini TRS.

The ID14 includes a digital input that supports both ADAT and SPDIF to give you the option to add up to eight extra mic pre inputs to expand your system.

Audient ID14-MKII Includes:

• iD14
• USB-C to USB-C cable
• Quick Start Guide

Audient ID14-MKII Features:

• Ultra-low latency software mixer
• 2x Audient console mic preamps
• 1x JFET instrument input
• 4x line outputs
• Dual headphone outputs
• Best in class converters
• ADAT input for expansion
• USB3.0 bus powered
• True phantom power over USB
• Advanced monitor control
• Scrollcontrol multi-function control interface
• Audio loop-back
• Free Software + plugins
• All metal construction

Audient ID14-MKII Specifications:

• Mic Preamp:
  • Connectors: 2 XLR female combo jacks
  • Gain range: 58dB
  • Mic Max Input Level: 12dBu
  • Max input level: 21dBu
  • Lineup: 12dBu = 0dBuFS
  • Mic Input Impedance: 2.8 kΩ
  • Line Input Impedance: > 8 kΩ
  • Signal to Noise Ratio: 101dBu A-weighted
  • EIN: 129dB A-weighted
  • THD+N @ 0dBu: 0.0017%
  • Crosstalk: > -100dB
  • CMRR @ 1k: > 75dB
  • Frequency Response – min. gain: ±0.5dB 10Hz – 40kHz
• D.I. / Instrument Input:
  • Connector: 1/4" TS jack
  • Range 40dB
  • THD+N @ 0dBu: 0.1%
  • Lineup: 12dBu = 0dBFS
  • Signal to Noise Ratio: 100dBu A-weighted
  • Frequency Response – min. gain: ±0.5dB 10Hz – 20kHz
• Analog to Digital Converter:
  • Dynamic Range: 120dB A-weighted
  • THD+N @ -1dBFS: 0.001%
  • CMRR: >80dB
  • Frequency Response: ±0.5dB 10Hz – 40kHz
• Line Outputs (DAC):
  • Connectors: 1/4" TRS jack x4
  • Lineup: 12dBu = 0dBFS
  • Dynamic Range: 125.5dB A-weighted
  • THD+N @ -1dBFS: 0.0006%
  • Crosstalk: > 120dB
  • Frequency Response: ±0.1dB 10Hz – 40kHz
• Headphone Outputs:
  • Connectors: 1/4" TRS jack, 3.5mm mini TRS jack
  • Lineup: 18.5dBu = 0dBFS
  • Dynamic Range: 125.5 dB A-weighted
  • THD+N 2 -1dBFS: 0.0009%
  • Crosstalk: >116dB
  • Frequency Response: ±0.25dB 10Hz – 40kHz
  • Maximum Output level:
  • At 30Ω: 2.59V peak, 1.827V RMS, 223mW
  • At 62Ω: 4.18V peak, 2.95V RMS, 280mW
  • At 600Ω: 7.72V peak, 5.46V RMS, 100mW
• USB-C High Speed:
  • Bus Power:
    • Minimum Requirement: 0.9A @ 5V, ≥ USB 3.0 port
    • Maximum Requirement: 1.5A @ 5V, USB-C 9provides higher headphone output levels)
    • Number of Input Channels: 10
    • Number of Output Channels: 16
  • DSP Mixer Latency (round trip in-to-out): 44.1kHz: 0.65mS, 48.0kHz: 0.6mS, 88.2kHz: 0.33mS, 96.0kHz: 0.31mS