Fostex RM-3DT 1U Rack-Mount Dante-Enabled Active Stereo Monitor Speaker

The RM-3DT offers the uncompressed digital audio signal transfer developed by Audinate.

An industry standard, this rack mount monitor set the benchmark for both audible and visual monitoring in rack mounted applications around the world.

Fostex RM-3DT Features:

• Accepts Balanced Analog Input and Dante® Input.
• Power saving design by the digital amplifier and switching power supply.
• 26-dot LED meter indicates either of VU, VU+PEAK, VU+PEAK HOLD, PEAK+PEAK HOLD.
• The display brightness can be adjusted in four levels.
• Outputs either or both of any 2-channel digital signals extracted from Dante & reg; network signals.
• Supported sampling frequencies: 44.1/48/88.2/96 kHz.
• Physical dimensions are identical to the conventional RM-3 for easy replacement.

Fostex RM-3DT Specifications:

• Speaker Section:
  • Unit: 110 x 40mm rectangle cone type
  • Impedance: 8 ohm
  • Sound Pressure Level: 84dB / W (1m)
  • Frequency response: 200 Hz – 20k Hz
• Amplifier Section:
  • Rated output: 10W x 2
  • Residual Noise: -50dBV or less (DIN AUDIO)
  • Distortion (T.H.D.): less than 0.1%
• Inputs:
  • Connector: Dante Input (RJ45), XLR-3-31 (balanced)
  • Analog Input Level: +4/0 dBu (balanced)
  • Analog Input Impedance: 10k ohm or more
• Through Out:
  • Connector: XLR-3-32 (balanced)
• Phones:
  • Connector: 1/4” Stereo Phone
  • Input Impedance: 16 ohm or higher
  • Maximum Output Level: 20mW + 20mW (32 ohm, 1kHz)
• Level Meter:
  • Display: 26 dot LED x 2
  • Reference Level: XLR: +4/0 dBu (analogue)
• General:
  • Dimensions: 482 (H) x 44 (W) x 284 (D) mm (including protruding parts)
  • Weight: approx. 3.5 kgs
  • Power Requirement: AC 100V to 240V 50/60Hz
  • Power Consumption: 10 W (0.5W or less in standby mode)