Electro-Voice Stands, Racks & Mounts

The Electro-Voice Mb200 is a wall/ceiling mount bracket kit for Electro-Voice Sx300, Sx100+, SxA100, and Sb121 speakers. Comes in black wrinkle powder coat finish. Shipping weight is 8.5 lbs (3.86 kg).

The Electro-Voice ZLX-BRK is a wallmount bracket for the ZLX Series loudspeakers. Fits the ZLX-12, ZLX-12P, ZLX-15, and ZLX-15P.

The Electro-Voice Mb200W is a wall/ceiling mount bracket kit for Electro-Voice Sx300, Sx100+, SxA100, and Sb121 speakers. This particular model comes in white wrinkle powder coat finish. Shipping weight is 8.5 lbs (3.86 kg).

The Electro-Voice ELX200-BRKT is a wall mount bracket for ELX200 2-way models.

MB5 Wall/Ceiling Mounting Bracket Kit The MB5 Wall/Ceiling Mounting Bracket Kit features robust brackets and hardware that allow for a Zx5 loudspeaker to be quickly and easily mounted to a wall or ceiling in almost any position to obtain t ...

The EBK-M10-3PACK is a set of three FORGED M10 Eyebolts, meticulously crafted to provide a reliable and robust anchoring solution for a variety of applications. These eyebolts are engineered for strength and durability, offering exceptiona ...

The Electro Voice RPK-82 Rough-in Mounting System includes an electrical junction box and flexible conduit for pre-wiring and installation when using plaster ceiling or sheetrock construction. This kit is meant to be used with the EVID C8. ...

The RMK2 kit from Electro-Voice is the specific 1U rack-mount kit designed to mount mount two RE3-RX receivers (sold separately) side-by-side into a 19" equipment rack. It contains all necessary items to couple and mount the units, with br ...

The Electro-Voice EBK1-M10-3PACK is a forged M10 3-pack short shank eye-bolt kit. Comes in silver.

From Electro-Voice, EVC-UB2 is a U-Bracket suited specifically for the EVC-1152 15" and EVC-1122 trapezoidal shape 12" loudspeakers. Features Two-piece U-bracket Horizontal, vertical, or ceiling mount Adjustment range up to 60° Fits the E ...

The Electro-Voice 309A is a high-quality suspension shock mount built specifically for the RE20 & RE27 microphones. Designed to interface with all common studio mic arms. Color: Black.

The EKX-BRKT15 is the official Electro-Voice EKX-15 & 15P Series loudspeakers Wall Mount Bracket kit. Electro-Voice EKX-BRKT15 Features: Custom-fitted for the EKX-15 & 15P Series Heavy-duty construction Includes screws & brackets ...

Electro-Voices' EVC-UB3 U-bracket is made for the evc-1122-vi loudspeaker. It can be mounted horizontally, vertically, or on the ceiling. Electro-Voice EVC-UB3 Includes: EVC-UB3 U-bracket Electro-Voice EVC-UB3 Features: One-piece U-bracket ...

The Electro-Voice ASP-58 is an adjustable loudspeaker pole with a M20 thread. It is designed for use with EKX and ETX subwoofers.

Stand clamp for use with all 3/4-inch diameter EV microphones (635A, RE16, RE200, N/D468). Color: Black

Electro-Voice windscreen for PolarChoice gooseneck mics. It provides protection for the microphone from 'P' pops and wind noise.

The VSA-1 from Electro Voice is a strong arm mount designed to support the PX1122M, PX1152M, ZX4/5 (requires HA-5), and Plasma P1 speakers. It has a black finish for discrete mounting. This item replaces the PSA-V.

The TCA-1 from Electro Voice is a truss clamp adapter for use with the VSA-1 strong arm speaker mount. It has a black powder-coat finish for unobtrusive mounting.

The Electro-Voice EBK-3 is a 3-pack forged 3/8-16 eyebolt kit.

Electro Voice 323S "Soft" Stand Clamp for 1" Diameter Microphones. Compatible microphones include the RE50 plus, tapered mics - N/D967, 767a, 267a, 367s, RE410 and RE510.

The Electro-Voice TC-21 is a tie clip for the Telex ULM-21 lapel microphone. Use this to position your microphone for best recording results.

The Electro-Voice Mb300 horizontal array kit contains two brackets and eight of each of the following: 5/16-18 x 1 hex-head bolts, 5/16 lock washers, 5/16-18 nuts. This particular model comes in a black wrinkle powder coat finish. The Mb30 ...

Rough in plates for EVID Ceiling Speakers Kits for rough-in pre-install when using sheetrock or plaster ceiling construction. RR-42: Rough-in mounting plate for use with the EVID C4.2 (package of 4) RR-82: Rough-in mounting plate for use w ...

The CB5 Array Rigging Kit features array brackets and hardware that allow you to array any Zx5 system. Its assembly is quick and easy with the hardware already provided on your Zx5 Loudspeaker.

Electro-Voice's TCA-ZX1 is a Truss Clamp Adapter for their ZX1 Speaker Series. NOTE: Product shown in image is for illustrative purposes only. Not representative of actual product. The item is a clamp adapter only - ZX1 speaker sold separa ...

379-1 Black windscreen pop filter for MC series, RE16, RE50, N/D967, 767a, 367s, 267a, RE410 and RE510

The Electro-Voice ASP1-302055000 is a 31-5/8" - 55" H adjustable subwoofer shaft / speaker pole.

The WS-97 Foam Windscreen for Electro-Voice RE-97 headworn microphones. Color: Beige

Microphone stand adapter for the PL33 microphone. Also fits RE20, RE27N/D and N/D868.

Isolating shock mount stand adapter for the PL37 condenser microphone. Also fits RE200.

Foam windscreen for PL33 kick drum microphone. Also fits RE20 and RE27N/D. Black. Optional item.

Image is for illustrative purposes. The item featured is the tie clip portion of the lapel microphone set.

The Electro-Voice TSS-1 is an aluminum tripod speaker stand with a reversible shaft with 1-3/8" to 1-1/2" (34.9mm to 38mm) diameter tubing. The TSS-1 is height adjustable from 44"-70" (1117.6 mm - 1778 mm) and has a maximum weight capacity ...

The Electro-Voice EVF-UB Wall/Ceiling Mounting U-Bracket Kit features a robust bracket and hardware that allow for an EVF loudspeaker to be quickly and easily mounted to a wall or ceiling in almost any position to obtain the desired sound ...

The Electro-Voice EVF-UB Wall/Ceiling Mounting U-Bracket Kit features a robust bracket and hardware that allow for an EVF loudspeaker to be quickly and easily mounted to a wall or ceiling in almost any position to obtain the desired sound ...

Electro-Voice's ETX-TCA-L truss adapter is used to suspend an ETX-12P, ETX-15P, or ETX-35P loudspeaker on 1.5-inch to 2-inch truss tubing. Electro-Voice ETX-TCA-L Includes: (1) ETX Powered Loudspeakers Accessory Guide (1) HEX L-KEY, 6MM, L ...

The EKX-BRKT12 from Electro-Voice is a black wall mount bracket specifically designed for EV's EKX-12 and EKX-12P loudspeakers.

The Electro-Voice DRC-2 is a convenient drum rim clamp for mounting microphones directly to a drum, eliminating the need for a dedicated mic stand or boom. The DRC-2 is designed to fit most metal drum rims. Its easy-to-use finger loop prov ...

The Electro-Voice ETX-BRKT12 is a wall mount bracket for the Electro-Voice ETX-12P loudspeaker. Electro-Voice ETX-BRKT12 Includes: (1) ETX Powered Loudspeakers Accessories Installation Guide (1) Allen Wrench (4) M10 Split Lock Washers (4) ...

Electro-Voice provides the ELX200-BRKT-W Wall Mount Bracket, designed for use with all of the ELX200 range full-range loudspeakers, such as the ELX200 2-Way (White) loudspeaker.

The ALPA (Active Linear Phased Array) is an advanced active directional antenna engineered to optimize RF signal reception while minimizing interference. It offers a selectable gain of 3 dB or 10 dB, allowing users to enhance the desired R ...

Windscreen pop filter for MC series, RE16, RE50, N/D967, 767a, 367s, 267a, RE410 and RE510 Black windscreen shown. Actual product is gray.

Electro-Voice's CPSM shockmount is a permanent mounting accessory providing shock isolation for the CP212 and CP218 podium microphones. The amount of isolation is substantial, in excess of 15 dB at 200 Hz. The CPSM is also theft-resistant ...

The WS-30 foam windscreen is a replacement windscreen for the Telex OLM-10, WLM-10, and WLM-30 wireless headset microphones. The windscreen helps to reduce speaking and environmental noise, lessening pop and light wind that occurs during n ...

The WS-746 foam windscreen is a replacement windscreen for the Electro Voice HM7 and Telex SCHS-745 unidirectional condenser microphones. The windscreen helps to reduce speaking and environmental noise, lessening pop and light wind that oc ...

The EBK-1 attachment kit contains three lifting eyebolts which screw into the inserts provided on the EVI-12 and EVI-15 speakers. The lifting eyebolt attachment points can then be used to suspend the EVI speakers using hardware rated for o ...

Rough in plates for EVID Ceiling Speakers Kits for rough-in pre-install when using sheetrock or plaster ceiling construction. RR-42: Rough-in mounting plate for use with the EVID C4.2 (package of 4) RR-82: Rough-in mounting plate for use w ...

Rough in plates for EVID Ceiling Speakers Kits for rough-in pre-install when using sheetrock or plaster ceiling construction. RR-42: Rough-in mounting plate for use with the EVID C4.2 (package of 4) RR-82: Rough-in mounting plate for use w ...

MB5 Wall/Ceiling Mounting Bracket Kit The MB5 Wall/Ceiling Mounting Bracket Kit features robust brackets and hardware that allow for a Zx5 loudspeaker to be quickly and easily mounted to a wall or ceiling in almost any position to obtain t ...

The CB5 Array Rigging Kit features array brackets and hardware that allow you to array any Zx5 system. Its assembly is quick and easy with the hardware already provided on your Zx5 Loudspeaker.

Single Stud Rigging Kit for the ZX3 series Loudspeaker. Set of 3. Note: Drawings are for illustrative purposes.

Includes spacers, detachable hang points, and eye bolts.

AB-ZE (P/N 301918-001) The AB-ZE is a versatile array bracket that is used to suspend EVID or ZX1i loudspeaker arrays, using a unique design to minimize assembly time. The AB-ZE kit is compatible with EVID 3.2, EVID 4.2, EVID 6.2, ZX1i-90 ...

The WS-21 metal windscreen for lavalier microphones is a replacement windscreen for the Electro Voice ULM-21 omnidirectional. The windscreen helps to reduce speaking and environmental noise, lessening pop and light wind that occurs during ...

The Electro-Voice WS-92 is a foam windscreen for the RE-92 Series of lavalier microphones.

The TSP-1 is a package which includes a pair sturdy TSS-1 adjustable speaker stands with tripod bases, ideal for ZX-4, SX100, SX300, and similar PA speakers with pole mount sockets. They collapse into a compact size and both within the TCB ...

Surface mounting enclosure for FM4.2 loudspeaker system. Includes wall mounting brackets. SOLD AND PRICED ONLY IN PAIRS.

Surface mounting enclosure for FM6.2 loudspeaker system. Includes wall mounting brackets. SOLD AND PRICED ONLY IN PAIRS.

The Electro-Voice TC-97-BLACK is a black clothing clip for Telex RE90Tx, ELM series, RE97, RE97-2, and RE97L microphones.

Microphone stand adapter for all PL Series VOCAL microphones.

Foam windscreen for all PL Series VOCAL microphones.

This is a black foam windscreen that is designed for the PL35 tom/snare drum microphone.

The Electro-Voice MB3 Wall/Ceiling Mounting Bracket Kit features robust brackets and hardware that allow for a Zx3 loudspeaker to be quickly and easily mounted to a wall or ceiling in almost any position to obtain the desired sound coverag ...

The Electro-Voice MB3 Wall/Ceiling Mounting Bracket Kit features robust brackets and hardware that allow for a Zx3 loudspeaker to be quickly and easily mounted to a wall or ceiling in almost any position to obtain the desired sound coverag ...

The Electro-Voice VRK-2B is a black vertical rigging kit for EVF to SUB.

The Electro-Voice TC2-30 is a tie clip for lapel / lavalier microphones.

Electro-Voice WS-18 Foam Windscreen for ULM-18 Lapel Mic.

The Electro-Voice WS-H3 is a foam windscreen for the HM3 microphone.

For typical horizontal clusters using EVF full-range enclosures, with or without EVF low-frequency systems, one HRK-1 kit allows the attachment of two such enclosures side by side. Two rigging kits are required to assemble a three-box clus ...

For typical vertical clusters using full-range enclosures, one VRK-3 kit allows the attachment of two EVH enclosures or one EVH enclosure to one EVF subwoofer; two rigging kits are required to assemble a three-box cluster. All EVF and EVH ...

The VRK-1B from Electro-Voice is a vertical rigging kit designed for EVF products that comes in the color black.

One HRK-2 kit allows the attachment of an EVF full-range or low-frequency enclosure to an EVF subwoofer or EVH full-range system. Another HRK-2 can be used to attach an EVF full-range or low-frequency system to the other side of an EVF sub ...

The HRK-2W from Electro-Voice is a White Horizontal Rigging Kit for EVF to SUB. One HRK-2W kit allows the attachment of an EVF full-range or low frequency enclosure to an EVF subwoofer or EVH full-range system. Another HRK-2W can be used t ...

The WS-97 Foam Windscreen for Electro-Voice RE-97 headworn microphones. Color: Black.

The WS-11 is a foam windscreen for PH-21/PH-23/Stinger.

This vertical rigging kit is designed for use with EVF Series speakers and subwoofers. Specifications: Shipping Weight: 22.9 lbs. 10.39 kg.

The Electro-Voice HRK-3B is a horizontal rigging kit for the EVH. One HRK-3 kit allows the attachment of one EVF subwoofer to an EVH full-range system.

This is a bracket used to wall mount the ETX-15P

The Electro-Voice EKX-TCA truss adapter is used to suspend an EKX-12, EKX-15, EKX-12P or EKX-15P full-range loudspeaker on a 1.5-inch to 2-inch truss tubing. Electro-Voice EKX-TCA Specifications: Shipping Dimensions (WxHxD): 16.5 in x 16.5 ...

The Electro-Voice Mb300 horizontal array kit contains two brackets and eight of each of the following: 5/16-18 x 1 hex-head bolts, 5/16 lock washers, 5/16-18 nuts. This particular model comes in a white wrinkle powder coat finish. The Mb30 ...

The Electro-Voice SMS-TR-5 is a black 5" threaded rod adapter.

The Electro-Voice UB-10D is a U-Bracket for a 10" subwoofer.

This is a wall mount bracket for the ETX-10P 10" powered loudspeaker by Electro-Voice, in a black coating.

Electro-Voice's EVC-WB is a wall-/ceiling-mount, pan/tilt bracket for their 8", 12" and 15" Compact Front-Loaded Loudspeakers (sold separately). It comes in your choice of Black or White. Features Pan/tilt adjustability Vertical or ceiling ...

Electro-Voice's EVC-UB1 is a 2-piece U-Bracket designed to mount a single one of their EVC-1082 8" speaker models (sold separately) to a wall or ceiling. Available in your choice of Black or White. Specifications Color: Black or white Dime ...

Mount your EVID ceiling speakers in sheetrock or plaster with the help of RR series mounting plates. In most situations, this package provides all of the hardware you'll need to install four EVID-PC6.2 ceiling speakers.

White vertical rigging kit for EVH Electro-Voice VRK-3W Specifications: Shipping weight: 26.2 lbs (11.884 kg)

Eyebolt kit for EVC Sub.

The ETX-TCA-S (ETX Truss Adaptor - Small) is a meticulously engineered truss adaptor designed specifically for use with ETX series products. This adaptor allows for secure attachment of ETX loudspeakers or other compatible equipment to tru ...

Includes spacers, detachable hang points, and eye bolts. This is a Restock item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sal ...

The RE3-ACC-RMK1 is a Rack Mount Kit for a Single RE3 Receiver from Electro-Voice. Electro-Voice RE3-ACC-RMK1 Applications: Compatible with the following products: RE3-ACC-AASP 2-in x 8-out antenna splitter 470-960MHz RE3-ACC-PASP 1 x 2 pa ...

The MFX-UB500-B is a 420mm U Bracket designed by Electro-Voice for secure mounting of the MFX-12MC 12" 3000W Multi-Use Coaxial Monitor. Finished in sleek black, this high-quality bracket ensures stability and durability for long-term use. ...