Accessories for Microphones

WindTech's MC-9 holds almost any handheld microphone. It is made from the same virtually unbreakable composite of ABS and Nylon as the MC-4. Standard 5/8"-27 thread with brass insert.

The MC1 microphone clip uses standard 5/8"" threads and also includes a 3/8"" thread adapter for european models. Made with unbreakable nylon flex material and can be used for most dynamic microphones.

Extra large windscreen fits most 'straight' or small ball end microphones up to 3/4" (19mm) diameter (AKG C-451). Inside Diameter: .625" Inside Depth: 1.75" Total Length: 4.375" Overall Diameter: 3.375" Colors available: Black Note: Entire ...

This four-conductor-shielded configuration can best be thought of as two twisted pairs twisted together. Using four small conductors in place of two large ones allows the loop area of the cable to be further reduced and its rejection of el ...

The Neutrik GN18 is a 9" (230 mm) long gooseneck with a 0.47" (12 mm) diameter, and is designed for flexible and secure mounting of microphones, lamps, etc. It is made of a durable stainless steel spiral with a non-reflective black finish ...

Gooseneck only, 500 mm, 15 mm diameter. For flexible and secure mounting of microphones, lamps etc. The versatile, modular system allows all conceivable combinations. Durable stainless steel spiral, non-reflective black finish. No rust, no ...

Supercardioid cartridge for WL183, WL184, WL185 and all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 Microphones. Note: [Black version pictured above]

The Shure R185W is a cardioid cartridge for all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 microphones.

Accessory kit for MK102/104 consisting of MZQ222 MZQ222-NI, MZQ100-ANT, MZQ100-GR, ZH100-ANT, ZH100-GR and case Specifications Weight: 320g

The viper grip clip has two pins on the back to slide securely into cloth at any angle. The clip is designed to hold the microphone a fraction of an inch away from the back plate. The viper grip is a good choice for discrete placement on t ...

Neumann's windscreens are made out of open-cell polyurethane foam. These windscreens do not cause interfering resonances and do not influence the directional pattern. Only in the upper frequency range is the output level slightly attenuate ...

The Shure A7WS is a windscreen designed for use with the SM7, SM7A and SM7B microphones.

The viper grip clip has two pins on the back to slide securely into cloth at any angle. The clip is designed to hold the microphone a fraction of an inch away from the back plate. The viper grip is a good choice for discrete placement on t ...

Microtech Gefell's W80 is a windscreen for their UMT800 microphone.

The AT8139S from Audio-Technica is a small foam windscreen designed specifically for use with headworn microphones featuring the A-T M19 mic case style design. It comes in black and works great with the following Audio-Technica microphones ...

The Isomax 2 Windscreen offers reliable protection against wind and breath noise, ensuring clear audio capture. It features a small red dot that marks the front side for accurate positioning with directional microphones, making it easy to a ...

The WS-746 foam windscreen is a replacement windscreen for the Electro Voice HM7 and Telex SCHS-745 unidirectional condenser microphones. The windscreen helps to reduce speaking and environmental noise, lessening pop and light wind that oc ...

Pro Co's 75-MIC-XX-SQ cable is a 75-foot, 24AWG quad cable with braided shield, custom double outer jacket, and black Neutrik XLR's with gold contacts on both ends. Features Conductor Gauge: (4)24 gauge Shield: Bare annealed copper braid S ...

The ME 102 modular mini-microphone capsule fulfills professional demands for sound quality and rugged handling, and is suitable for all areas of live work where a small and unobtrusive microphone is needed for vocal and speech applications ...

Since 1976, WindTech has manufactured the highest quality American made microphone windscreens on the market. They are available in 25 brilliant colors, and a wide variety of shapes and sizes to fit most popular microphones. Using a propri ...

The Anchor Audio MSB-201 is a foldable microphone stand with a 33" boom arm extension. Specifications Dimensions (H x W x D): 36" x 3.5" x 3.5" Weight: 7 lbs

The AT8128 from Audio-Technica is a small foam windscreen designed specifically for use wit their ATM73 model headworn microphones. It comes in black, and fits A-T case style: M5. Features Small foam windscreen for ATM73 headworn microphon ...

This is a 25' mic cable, featuring XLR connectors on each end.

Sony's wireless receiver case is designed for the WRR-855A receiver. It attaches directly to the DSR-300L/DSR-500WS via a V-shoe attachment and a direct audio/power connection interface. A lithium-ion battery can also be attached directly ...