RDL EZ-HDA6 Stereo Headphone Distribution Amp, 1X6 Rear-Panel Outputs

Radio Design Labs' EZ-HDA6 contains six stereo headphone amplifiers with individual front-panel volume controls. Headphone outputs are provided on rear-panel 1/4" jacks. One input signal feeds all the amplifiers. Stereo RCA jacks, a MINI jack and a dual 1/4" jack (for loop out connection) are provided for connecting the input source. The EZ-HDA6 is used in music stores, houses of worship, studios, museums, home component systems and commercial sound systems. Power supply included.

Features:

• One Stereo Input to Six Stereo Outputs
• Unbalanced Inputs on Rear Panel
• Input on MINI, 1/4” (6.3 mm) or RCA Jacks
• LOOP OUT Jack for 1/4” (6.3 mm) Input
• 1/4” (6.3 mm) Headphone Outputs on Rear Panel
• Front-Panel LEVEL Control for Each Output

Specifications:

• Inputs (3): Stereo on dual RCA jacks, stereo mini jack or 1/4” (6.3 mm) TRS, > 10 kO, -10 dBV nominal, +8.5 dBV max. (RCA and 1/4”), -16 dBV nominal, +2 dBV max. (Mini)
• Stereo input LOOP OUT on 1/4” (6.3 mm) TRS
• Level control: Off to +2.5 dB gain (RCA and 1/4” inputs, 100 O output load), Off to +9 dB gain (Mini input, 100 O output load)
• Outputs (7): Stereo on 1/4” (6.3 mm) TRS (6, rear panel), 60 mW (100 O load)
• Frequency Response: 20 Hz to 50 kHz (±1.5 dB, 100 O load)
• THD+N: < 0.1% (10 mW output, 100 O load)
• Crosstalk: < -75 dB (1 kHz)
• Noise: < -95 dB (below 10 mW output, 100 O load, maximum gain)
• 24 Vdc power supply current: 50 mA (idle), 80 mA (max.)
• Power supply input voltage: 100 to 240 VAC
• Warranty: 3 Years; contact RDL technical support department for assistance
• Case dimensions: 5.75” (14.6 cm)W x 3” (7.6 cm)D
• Mounting size: 1/3 rack width