Product Overview
Is your network secure in case of a blackout? To keep your network up and running, you need reliable battery backup. The SMART1500 Line-Interactive UPS offers up to 20 minutes of backup runtime for a half load, in a small-footprint tower format that fits easily on or under a desk. Plus, USB and DB9 ports allow you to remotely monitor and manage your network from anywhere—keeping you in control and your equipment on-line.
Features:
- 1.5kVA / 1500VA line interactive tower UPS system
- 120V output, Corrects brownouts and overvoltages from 75V to 147V
- Front panel status LEDs with load and battery capacity level display
- USB & RS232 ports, 1 switched load bank, Hot-swap batteries
- NEMA 5-15P input, 6 5-15R outlets
- Tripp Lite's SMART1500 intelligent, line interactive UPS system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 20 minutes half load runtime and 7 minutes at full load during power failures. 1500VA/980 watt power handling capability supports a variety of networking, telecom and various other application types, including the support of multiple network workstations. Includes a total of 6 outlets, 1 of which can be individually powered on and off via software interface to selectively reboot remote equipment or to automatically shed less significant loads to extend battery runtime for more critical equipment. Supports remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Supports SNMP with optional SNMPWEBSOLO external adapter. Built-in audible alarm and 5 front panel LEDs indicate status of line power, battery power, battery low/replace, voltage regulation and load level. Wall mountable with optional UPSWM wallmount bracket. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges. Attractive, small-footprint tower housing uses less than 66 square inches of floor or desktop space.
Specifications:
- OUTPUT
- Output Volt Amp Capacity (VA) 1500
- Output kVA capacity (kVA) 1.5
- Output Watt Capacity (watts) 980
- Output power factor 0.7
- Nominal Output Voltage(s) Supported 120V
- Frequency compatibility 60 Hz
- Output voltage regulation (line mode) -18%, +8%
- Output voltage regulation (Battery mode) +/- 5%
- Built-in UPS output receptacles 6 5-15R outlet(s)
- Built-in controllable switched load banks One switchable single-outlet 5-15R load bank
- Output AC waveform (AC mode) Sine wave
- Output AC waveform (battery mode) PWM sine wave
- INPUT
- Rated input current (at maximum load) 12A
- Nominal Input Voltage(s) Supported 120V AC
- UPS input connection type 5-15P
- Input circuit breaker 15A
- UPS Input cord length (ft.) 6
- UPS Input cord length (m) 1.8
- Recommended Electrical Service 15A 120V
- BATTERY
- Full load runtime (minutes) 7 min. (980w)
- Half load runtime (minutes) 20 min. (490w)
- DC system voltage (VDC) 36V DC
- Battery recharge rate (included batteries) Less than 4 hours from 10% to 90%
- Replacement battery cartridge (internal UPS battery replacement) RBC53
- Battery Access Battery access door
- Battery replacement description Hot-swappable, user replaceable batteries
- VOLTAGE REGULATION
- Voltage regulation description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147
- Overvoltage correction Input voltages between 128 and 147 are reduced by 12%
- Undervoltage correction Input voltages between 93 and 107 are boosted by 14%
- Severe undervoltage correction Input voltages between 75 and 92 are boosted by 30%
- LEDS ALARMS & SWITCHES
- LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
- Alarms Audible alarm indicates power-failure, overload and low-battery conditions
- Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
- Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
- SURGE / NOISE SUPPRESSION
- UPS AC suppression joule rating 480
- UPS AC suppression response time Instantaneous
- EMI / RFI AC noise suppression Yes
- PHYSICAL
- Installation form factors supported with included accessories Tower
- Installation form factors supported with optional accessories Wallmount (UPSWM - tower mounting kit)
- Primary form factor Tower
- UPS / Power Module dimensions in primary form factor (height x width x depth / inches) 12.8 x 7.5 x 9
- UPS / Power Module dimensions in primary form factor (height x width x depth / cm) 32.4 x 19 x 22.9
- UPS / Power Module weight (lbs) 38.4
- UPS / Power Module weight (kg) 17.4
- UPS housing material PVC
- Cooling method Fan
- ENVIRONMENTAL
- Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
- Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
- Relative Humidity 0 to 95%, non-condensing
- AC mode BTU / hr. (full load) 138.8
- Battery mode BTU / hr. (full load) 454.4
- COMMUNICATIONS
- Communications interface USB; DB9 Serial
- Network monitoring port description Supports detailed monitoring of UPS and site power conditions
- PowerAlert software Included
- Communications cable USB and DB9 cabling included
- WatchDog compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
- LINE / BATTERY TRANSFER
- Transfer time 2-4 milliseconds
- Low voltage transfer to battery power (setpoint) 75
- High voltage transfer to battery power (setpoint) 147
- SPECIAL FEATURES
- Cold Start (startup in battery mode during a power failure) Cold-start operation supported
- High availability UPS features Hot swappable batteries
- Green & high efficiency features Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
- CERTIFICATIONS
- UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)
