Dynacord L2800FD DSP Power Amplifier, 2x140W

The Dynacord L2800FD is a live performance DSP power amplifier 2 x 1400W.

Features

• Live performance DSP amplifier
• Fully integrated professional speaker processing with FIR Drive technology
• Market leading acoustic performance and rock solid reliability
• True 2 ohm stability
• Intuitive system control software, makes setup and control easy

Specifications

• Load Impedance: 2 Ohm 2.7 Ohm 4 Ohm 8 Ohm
• Maximum Output Power, Single Channel: 2 Ohm: 2300W;2.7 Ohm: 2000W; 4 Ohm: 1400W; 8 Ohm: 700W
• Maximum Output Power, Dual Channel: 2 Ohm: 2200W; 2.7Ohm: 1800W; 4 Ohm: 1300W; 8 Ohm: 650W
• Maximum Output Power, Bridged: 4 Ohm: 4400W; 8 Ohm:2600W
• Maximum RMS Voltage Swing, THD = 1%, 1kHz: 78.8V
• Voltage Gain ref.1kHz: 32.0dB
• IMD-SMPTE, 60 Hz, 7 kHz: < 0.1%
• DIM 30: < 0.05% (3.15 kHz, 15 kHz)
• Maximum Input Level: +21 dBu
• Crosstalk: < -80dB (ref. 1 kHz, at 100 W/4 Oh,)
• Frequency Response: 10 Hz to 21 kHz (+/- 1 dB)
• Input Impedance, active balanced: 20 k Ohm
• Signal-to-Noise Ratio (A-weighted): >107dB
• Output Noise , A-weighted: < -68 dBu
• Output Stage Topology: Class H
• Power Requirement: 240 V, 230 V, 120 V or 100 V; 50Hz to 60 Hz (factory configured)
• Power Consumption: 700W (? Maximum Output Power @4O)
• Protection: Audio limiters, high temperature, DC, HF,Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
• Cooling: Front-to-rear, 3-stage-fans
• Safety Class: I
• Available Color: Black
• Height: 3.46" (88 mm)
• Width: 19.02" (483 mm)
• Depth: 18.2" (462.4 mm)
• Weight Net: 35.71 lbs (16.2 kg)
• Signal Processing: FIR Filters, Audio Limiters;Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance
• Mains Fuse: 240 V/230 V: T15AH; 120 V/100 V: T25AH
• Operating Temperature Range: +5°C to +40°C (40°F to+105°F)
• Total Harmonic Distortion: < 0.05% (at 900 W/4 Ohm MBW = 80 kHz, 1kHz)