Audio-Technica AT-VM95E Dual Moving Magnet Cartridge

The AT-VM95E Dual Moving Magnet Cartridge from Audio-Technica is a VM95-Series cartridge with 0.3 x 0.7 mil elliptical stylus that fits half-inch mount turntables. Its special coil design delivers a powerful 4.0 mV output level, and offers excellent channel separation as well as low distortion, all providing outstanding tonal quality. Its durable, low-resonance housing includes threaded inserts that allow it to be mounted to the headshell with just 2 screws – no nuts required. And because all VM95 Series share the same body, the stylus can be replaced with any of the 6 interchangeable AT-VMN95 replacement styli (replacements sold separately).

Includes

• 1x AT-VM95E cartridge • 2x 11mm installation screws • 2x 8mm installation screws • 2 washers

Features

• VM95-Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
• Aluminum cantilever
• Specially wound coils increase output voltage
• Durable low-resonance polymer housing
• Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just 2 screws – no nuts required
• Compatible with any AT-VMN95 replacement stylus

Specifications

• Frequency Response: 20 - 22,000 Hz
• Channel Separation: 20 dB (at 1 kHz)
• Vertical Tracking Angle: 23°
• Vertical Tracking Force: 1.8 - 2.2 g (2.0 g standard)
• Stylus Construction: Bonded round shank
• Recommended Load Impedance: 47 kΩ
• Coil Impedance: 3.3 kΩ (1 kHz)
• DC Resistance: 485 Ω
• Coil Inductance: 550 mH (1 kHz)
• Load Capacitance: 100 to 200 pF
• Output: 4.0 mV (1 kHz, 5 cm/sec.)
• Channel Balance: 2.0 dB (1 kHz)
• Stylus Shape: 0.3 x 0.7 mil elliptical
• Cantilever: Aluminum pipe
• Mount: Half-inch
• Weight: 0.22 oz. (6.1 g)
• Dimensions (H x W x D): 0.68" x 0.74" x 1.20" (17.2 × 18.9 × 28.3mm)
• Replacement Stylus: AT-VMN95E