Audio-Technica PRO 35cH Cardioid Condenser Clip-On Instrument Mic, cH-style Connector

The PRO 35cH package includes the PRO 35 cardioid condenser clip-on instrument microphone only, with its permanently attached 55" cable. The cable has a cH-style screw-down 4-pin connector for use with Audio-Technica cH-style body-pack transmitters.

PRO 35 Mic

This cardioid condenser clip-on instrument microphone excels in high-SPL (sound pressure level) applications and is ideal for active instrument stage performances. It features extended frequency response which captures subtle performance nuances. It includes a UniMount® clip, enabling accurate positioning and providing shock-resistance while protecting the mic's element. Its cardioid polar pattern offers reduced pickup of sounds from the rear and sides, thus improving isolation of the desired sound source.

Applications

Sax • Toms • Brass • Percussion • Other high-SPL instrument stage performance audio capture

Includes

• PRO 35 microphone with 55" cH-style terminated cable
• AT8418 UniMount instrument mount for brass, reeds, drums, etc.
• Soft protective pouch

Features

• Designed for high-SPL instrument audio capture
• Ideal for active stage performances
• UniMount clip permits accurate positioning
• Cardioid polar pattern reduces pickup of sounds from the sides and rear
• Rugged 4-pin cH-style screw-down connector

Specifications

• Element: Fixed-charge back plate, permanently-polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 50 - 15,000Hz
• Low Frequency Roll-off: 80Hz, 18dB/octave
• Open Circuit Sensitivity: -45dB (5.6mV) re 1V @ 1Pa
• Impedance: 250Ω
• Max. Input Sound Level: 145dB SPL, 1kHz @ 1% T.H.D.
• Dynamic Range (typical): 115dB, 1kHz @ Max SPL
• S/N Ratio: 64dB, 1kHz @ 1Pa
• Phantom Power Requirements: 11-52VDC, 2mA, typical
• Switch: Flat, roll-off
• Microphone Weight: 0.3oz. (8g)
• Microphone Dimensions (L x Dia.): 0.98" x 0.40" (25 x 10.2mm)
• Cable: 55" (1.4m) long (permanently attached to microphone), 0.10" (2.6mm) diameter, 2-conductor, shielded cable terminated with cH-style screw-down 4-pin connector for use with cH-style body-pack transmitters (sold separately)