Doug Fleenor Design DMX12ANL-DIN-JBOX-PS 12-Channel DMX512 to Analog 0-10V Interface

The DMX12ANL-DIN-JBOX-PS is a 12-channel DMX512 to analog 0-10V interface with power supply. It connects to the DMX512 in and thru and analog outputs with pluggable terminal blocks and can be pre-mounted in a NEMA1 electrical enclosure.

Each analog output is capable of sourcing or sinking up to 15mA and no user adjustments or modifications are required to select sourcing or sinking modes. To ease field wiring, each output channel has a dedicated common terminal. The DMX512 input is optically isolated from the analog outputs while the analog outputs are not isolated from each other.

Indicators are provided for Signal (DMX512), and MIMIC 1 which mimics the level of the first analog output. An error LED will light in an output’s level cannot be maintained at the proper voltage.

Doug Fleenor Designs DMX12ANL-DIN-JBOX-PS Specifications:

• Input Circuit: Protected EIA-485 receiver (LT1785)
• Input Protection: Undamaged by up to 60V continuous, 15kV transients
• Isolation: DMX512 input optically isolated to 600V
• Input Signal: 0.2V minimum, 12V maximum, DMX512, DMX512/1990, or DMX512-A
• Input/Thru Connector: 3-position pluggable terminal blocks
• Termination: None: Unused pass-through connections must be externally terminated
• Power Input: 100-240VAC 50/60 Hz, 0.8-0.4 Amps
• Output Connectors: Two 12-position pluggable terminal blocks- each block has 6 outputs and 6 commons
• DMX Footprint: 12 consecutive DMX slots beginning with the selected DMX starting address
• DMX Starting Address: 3-digit thumbwheel switch. Address changes are immediate with no power cycling needed