Product Overview
The ISA ADN8 adds 8 channels of Dante, AES3 (AES/EBU), and ADAT TOSLINK connectivity to your IAS One microphone preamp, complete with operation at sample rates up to 24-bit/192kHz.
The ADN8 allows synchronization to multiple digital sources via Word Clock on BNC connectors allowing you to sync your Dante network to house clock or external equipment to the Dante network.
Since it's Focusrite, the Dante outputs provide total network connectivity to all RedNet devices, Red interfaces, and any other Dante-enabled device you or a client may have. All of this can be controlled conveniently through RedNet control.
And as with all Focusrite products, wherever you happen to be in the world, you can rely on a three-year warranty if any Focusrite Pro hardware needs repairing or replacing due to a manufacturing fault.
Focusrite Pro ISA-ADN8 Features:
- Eight-channel analogue to digital interface for ISA 428 MkII and ISA 828 MkII
- Up to 24-bit/192kHz sample rate
- Dante connectivity via Primary and Secondary Ethernet ports for redundancy and auto switchover in case of failure
- Eight-channel AES59 DB25 output connection for AES3
- Two TOSLINK connectors for ADAT (8 channels at up to 96kHz; 4 channels at 192kHz)
- Word Clock I/O on BNC connectors allows synchronization to multiple digital sources, for syncing the Dante network to house clock, or for syncing external equipment to the Dante network
- RedNet Control and Dante Controller software allow Dante routing and control from a computer; no hardware patching required
- Brainworx bx_console Focusrite – exclusive plug-in that faithfully captures the sound, feel and styling of the original Focusrite ISA 110 Equalizer and ISA 130 Dynamics Modules.
Focusrite Pro ISA-ADN8 Specifications:
- Audio Performance
- 0 dBFS Reference Levels: 22dBu
- Frequency Response: 20Hz - 20kHz ±0.1dB
- THD+N: -105dB (0.0006%) unweighted, 20Hz - 20kHz; -1dBFS input
- Noise in Presence of Signal: -121dBu 'A'-Weighted (typical)
- Dynamic Range: 121dB 'A'-weighted (typical), 20Hz - 20kHz
- Digital Performance
- Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
- Clock Sources: Internal or Word Clock
- Crosstalk
- Input to Input: < -100dB; 20Hz - 20kHz (driven channel at -20dBFS)
- Front Panel Output Connectivity
- Dante Channel Count: 8 x ADAT channels
- Output: 2 x TOSLINK connectors
- AES3 Channel Count: 8 x AES3 channels
- Output: 1 x DB-25 connectors (AES59 Combined I/O / Tascam Digital)
- ADAT
- Channel Assignments @ 44.1 kHz, 48 kHz: Port 1 = Channels 1 - 8 , Port 2 = Channels 1 - 8
- Channel Assignments @ 88.2 kHz, 96 kHz: SMUXI: Port 1 = Channels 1 - 4, Port 2 = Channels 5 - 8
- Channel Assignments @ 176.4 kHz, 192 kHz: SMUXII: Port 1 = Channels 1 - 2 , Port 2 = Channels 3 - 4
- Channel Count: 8 x ADAT channels
- Output: 2 x TOSLINK connectors
- Word Clock
- Word Clock Input: 1 x BNC 75O port (Switchable Termination)
- Word Clock Output: 1 x BNC 75O port
- Dimensions
- Height: 33.2mm / 1.31"
- Width: 158.5mm / 6.24"
- Depth: 202.4mm / 7.97"
- Weight
