DPA 4671-OC-H-B00 4671 Heavy Duty Omni Mic, Presense Boost, Loud SPL, Bla

DPA's reputation for crafting rugged microphones is legendary, and the 4671 carries on that tradition. The 4671-OC-H-B00 is a heavy-duty black Omnidirectional microphone with a presence boost and has been adjusted to operate at extreme SPL (Sound Pressure Levels). The higher SPL capability allows the microphone to handle up to 144 dB before clipping. The added presence boost makes the 4671 ideal an ideal choice when positioning the mic on the performer's chest as it maintains intelligibility.

The 4671-OC-H-B00 cable terminates with a MicroDot connector allowing you to choose from any of DPA's available 4671 adapters (sold separately) as your needs change without the need to replace your microphone.

Extremely resistant to sweat and humidity thanks to a dual vent design, the 4671 is also equipped with a kevlar-reinforced cable and stainless steel housing built to withstand the rigors of everyday use in demanding applications.

Due to its small size, it exhibits an exceedingly accurate omnidirectional pattern and therefore does not need to be aimed directly at the sound source to achieve high-quality pickup.

DPA 4671-OC-H-B00 Features:

• The most rugged and reliable version of DPA miniatures
• Stainless steel housing, heavy-duty strain relief and thick cable
• Exceptional audio quality
• Uniform, consistent sound between DPA mics
• Sturdy but small for flexible and easy concealment
• Modular adapter system fits most professional wireless systems

DPA 4671-OC-H-B00 Specifications:

• Directional pattern: Omnidirectional
• Principle of operation: Pressure
• Cartridge type: Pre-polarized condenser
• Frequency response: 20 Hz - 20 kHz
• Effective frequency range ±2 dB: 100 Hz - 15 kHz with typ. 5 dB soft boost at 4 - 6 kHz
• Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
• Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
• Distortion, THD < 1% - Legacy: 120 dB SPL RMS, 123 dB SPL peak
• Distortion, THD < 1% - CORE: 134 dB SPL RMS, 137 dB SPL peak
• Dynamic range: Typ. 97 dB
• Max. SPL, THD 10%: 144 dB SPL peak
• Rated output impedance: 30 - 40 Ω
• Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
• Output balance principle: Signal balanced with DAD6001-BC XLR Adapter
• Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
• Power supply (for full performance): For wireless systems: Min. 5 V - max. 10 V through DPA adapter, With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
• Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
• Connector: MicroDot, TA4F Mini-XLR, 3-pin LEMO, Mini-Jack
• Color: Black
• Weight: 14 g (0.5 oz) incl. Cable and MicroDot connector
• Microphone diameter: 5.4 mm (0.21 in)
• Microphone length: 17.6 mm (0.7 in)
• Cable length: 1.8 m (5.9 ft)
• Cable color: Black
• Cable diameter: 2.2 mm (0.09 in)
• Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH): Up to 90%