Product Overview
The Yamaha RM-CR is the signal processor essential for the ADECIA system. The RM-CR is very user friendly and automatically recognizes connected devices on the same network and is also Dante ready. With the Auto Tuning and Auto Mixer functions, you can ensure that your sound quality is right where it needs to be.
Yamaha RM-CR Features:
- Standard network audio support for "Dante"; all compatible devices can be connected with a single network cable
- Automatically recognizes connected devices on the same network for audio routing
- Equipped with the Auto Tuning functions that automatically measure and provide the optimum sound settings for the environment
- Equipped with the Auto Mixer functions that automatically mix the audio of all connected microphones
- Equipped with various Input/Output connections such as USB, VoIP, analog, and Bluetooth
Yamaha RM-CR Specifications:
- Dimensions: (W x D x H) 215 × 260 × 44 mm
- Weight: 1.6 kg
- Supported OS: Windows 11, Windows 10 (32 bit/64 bit), Windows 8.1 (32 bit/64 bit), macOS 12, macOS 11, macOS 10.15
- Power Requirements: PoE+ (IEEE 802.3at, LLDP), DC 48 V
- Maximum Power Consumption: 15.0 W
- Connector: RJ 45, USB, XLR balanced, RCA
- In Operation Temperature: 0 - 40 ℃
- Humidity: 30 % - 90 % (No condensation)
- Storage Temperature: -20 - 60 ℃
- Humidity: 20 % - 90 % (No condensation)
- Indicator: Power Indicator, Status Indicator, Bluetooth Indicator, Network Port Indicator (x3)
- Mount: Table Mount, Rack Mount
- Accessories: Installation Manual, USB Cable (A-B) 5 m (16.4 ft), USB Cable (A-micro B) 1 m (3.3 ft), 4x Rubber foot, Access Panel
- Network Specifications:
- Ether1: Dante Audio/Dante Control, Remote Control, WebUI, PoE+
- Ether2/Ether3: Corporate Network, Remote Control, SIP, Web UI
- USB: USB2.0, Network Class, Web UI, Fixed IP
- Audio Specifications:
- Audio I/O:
- Dante: 16in/16out
- USB: USB2.0, Audio Class 1.0, Input: 2 ch, Output: 2 ch @48 kHz
- Mic Input: XLR balanced, Input 2 ch
- AUX: RCA unbalanced (Line Level), Input: 2 ch, Output: 2 ch
- Speaker Out: RCA unbalanced (Line Level), Output: 2 ch
- Bluetooth: Bluetooth 4.2
- Supported Profiles: HFP (1.6), A2DP, AVRCP
- Supported Codec: CVSD, SBC, mSBC
- Wireless Output: Class2
- Maximum Communication Distance: 32.8 ft (no obstacles)
- Radio Frequency (Operational Frequency): 2,402 to 2,480 MHz
- Maximum Output Power (EIRP): 4.0 dBm (2.5 mW)
- SIP: Call Handling: Dial, Answer, Hold, Resume, Forwarding, Do not disturb, Call ID, Voice Mail Notifications (switch configured)
- Call Bridging: Supports Bridging SIP, USB, BT and AUX Calls. Join, Split, Hold, Resume, 5+1 Lines: Up to 2 SIP calls, 1 USB call, 1 Bluetooth Call, 1 AUX, plus the user
- Codecs: G.711, G.722HD, G.729ab, G.726
- DTMF Support: RTP event, SIP in-band, SIP info package
- Security: SRTP Support (RFC 1889), IETF SIP support(RFC 3261 and companion RFCs)
- Sampling Rate: 48 kHz
- Bit Depth: 24 bit
- Latency: 8 [ms] (Dante In to USB Out, includes signal processing)
- Frequency Response: 20 Hz – 20 kHz
