Product Overview
The Shure Axient Digital AD600 Digital Spectrum Manager is designed for real-time, wide-band spectrum scanning and monitoring from 174 MHz to 2.0 GHz, spectrum analysis, and frequency coordination all from a single rack unit. Six antenna connections provide several coverage options and the Dante connectivity provides advanced audio monitoring of your network. Use the USB port to export, import, or save backup scans, event logs, and additional data.
Shure AD600US Includes:
- AD600
- Power cable with V-Lock (region specific)
- USB extension cable
- Rack mount hardware kit (90YT1371)
Shure AD600US Features:
- Advanced, comprehensive RF coordination for your network
- Rreal-time scanning to find available frequencies and monitor RF activity
- Large, 6.6-inch color display for viewing and analyzing the RF spectrum
- Guided RF coordination to save time and effort in challenging RF environments
- Tools for viewing, analyzing, and listening to RF activity
- Tuning Range: 174 MHz to 2 GHz for support of multiple frequency bands
- Data capture and storage to archive RF information for analysis
- Network enabled for large-scale system deployments
- USB connections for external data storage of scans, event logs, and other data
- Dante enabled for advanced audio monitoring of your network
- Compatible with Wireless Workbench to extend control and monitoring options
- AC and DC powered options
Shure AD600US Specifications:
- RF Tuning Frequency Range: 174 - 2000 MHz
- RF Tuning Step Size: 25 kHz / 200kHz
- Noise Floor: -154 dBm/Hz
- Image Rejection: > 90 dB
- Spurious Response: < -100 dBm, typical
- Dimensions: 1.7 x 19.0 x 11.25 inches H x W x D
- Weight: 8.15 lbs
- Housing: Steel
- Power Requirements: 110 - 240 V AC, 50 - 60 Hz
- Current Drain: 1.2 A
- Operating Temperature Range: 0°F - 122°F
- Storage Temperature Range: -20°F - 165°F
- RF Input
- Connector Type: BNC
- Impedance: 50 Ω
- Maximum Input Level: +10 dBm
- Bias Voltage: 12 - 13.5 V DC: 150 mA maximum per antenna, 450 mA maximum per device
- Headphone Monitor Audio Output
- Audio Frequency Response: 20 Hz - 20 kHz, +/- 3 dB
- Configuration: ¼" / 6.3 mm connector, unbalanced stereo
- Impedance: 63 Ω
- Maximum Signal Level: 350 mW
- Pin Assignments: Tip: Audio + , Left: | , Ring: Audio + , Right: | , Sleeve: Ground
- Networking
- Network Interface: Quad Port Ethernet 10/100/1000 Mbps
- Redundant Dante support: PoE supported on the control ports
- Network Addressing Capability: DHCP or Manual IP address
- DC Module Specifications
- DC Input Voltage Range: 10.9 - 16V
- Maximum DC Input Current: 5.5 A
- Protection Modes: Reverse Polarity, Over Voltage
- Connector Type: 4-pin XLR (male)
- The shell of the DC inlet XLR connector is connected to Chassis Ground.
- Recommended Cable Gauge:
- 6 feet or less 18 AWG (1 mm2)
- 7 to 15 feet 16 AWG (1.5 mm2)
- 16 to 25 feet 14 AWG (2.5 mm2)
- Important: Total cable length should not exceed 25 feet.
