Product Overview
An advanced 4K60 4:4:4 AV switcher offering high performance. Features four HDMI® inputs and two HDMI outputs, supporting HDR (High Dynamic Range) and Dolby Vision® video formats. Includes automatic switching of HDMI inputs, advanced EDID management, native Crestron® control through Ethernet, XiO Cloud® connectivity, and enterprise-grade security.
Crestron HD-MD4X2-4KZ-E Features:
- 4K60 4:4:4 digital AV switcher
- HDR10, HDR10+, and Dolby Vision® video formats
- Four HDMI® inputs and two HDMI outputs
- Automatic switching of inputs
- EDID management
- HDCP 2.3 compliance
- HDMI audio de-embedding
- Device control via CEC
- Enterprise-grade security
- Built-in web interface
- Compatibility with Crestron® 3-Series® or later control systems
- .AV Framework™ technology support
- XiO Cloud® service support
- Compact surface-mountable design
- PoE powered device (optional power pack sold separately)
Crestron HD-MD4X2-4KZ-E Specifications:
- Video:
- Input Signal Types: HDMI with HDR10, HDR10+, Dolby Vision, Deep Color, 4K60 4:4:4 support1, 2 (DVI and Dual-Mode DisplayPort™ interface compatible)
- Output Signal Types: HDMI with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support1, 2 (DVI compatible)
- Switcher: 4x2 digital AV switcher
- Copy Protection: HDCP 2.3
- Audio - General:
- Digital-To-Analog Conversion: 24-bit 48 kHz
- Frequency Response: ±0.5 dB, 20 Hz to 20 kHz
- THD+N:
- S/N Ratio: >95 dB, 10 dBV, 20 Hz to 20 KHz, A-weighted
- Crosstalk: ≤90 dB, 1 KHz, for multiple inputs only
- Stereo Separation: ≤80 dB, 20 Hz to 20 kHz
- Audio - Source Inputs:
- Input Signal Type: HDMI (Dual-Mode DisplayPort interface compatible)
- Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels
- Audio - Digital Output:
- Output Signal Type: HDMI
- Formats: Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS, DTS-ES, DTS 96/24, DTS HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels
- Source: -80 dB to +20 dB adjustment range, plus Mute
- Master Volume: -80 dB to +20 dB adjustment range, plus Mute
- Audio - Analog Line Output:
- Output Signal Type/Format: Stereo 2-channel
- Volume Control: -80 dB to +20 dB adjustment range, plus Mute, Mono, and Stereo
- Communications:
- Ethernet: 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, Web browser setup and control, Crestron control system integration, IEEE 802.1X, Secure CIP, Authentication, SSH/SSL, TLS
- USB: For firmware loading and configuration management and to power a USB powered device
- HDMI: HDCP 2.3, EDID, CEC
- Connectors:
- HDMI IN 1-4: (4) 19-pin Type A connector, female; HDMI digital video/audio input (DVI and Dual-Mode DisplayPort interface compatible)
- HDMI OUT 1-2: (2) 19-pin Type A connector, female; HDMI digital video/audio output (DVI compatible)
- AUDIO OUT, AUX 1-2: (2) 5-pin 3.5 mm detachable terminal block; Balanced/unbalanced stereo line-level audio output; Output Impedance:
- LAN PoE: (1) 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T Ethernet port; PoE (Power over Ethernet) powered device (PD) port; IEEE 802.3at Type 1 (802.3af compatible) Class 0 (12.95 W) compliant
- 24 VDC 0.75 A: (1) 2.1 x 5.5 mm DC power connector; 24 VDC power input; PW-2407WU power pack (sold separately)
- SERVICE: (1) USB Type A female; For firmware loading and configuration management; Can also provide up to 5 V 500 mA power to a USB powered device
- G: (1) 6-32 screw, chassis ground lug
- Controls and Indicators:
- PWR: (1) LED. Amber indicates that the device is booting. Green indicates that the device is operational.
- AUTO: (1) Push button to enable or disable automatic switching and (1) green LED to indicate that automatic switching is enabled
- INPUT 1-4: (4) Push buttons for manual input selection and (4) LEDs. Green indicates that the corresponding input is routed to an output. Amber indicates that a source is detected at the corresponding input but is not routed to an output.
- OUTPUT 1-2: (2) Push buttons for manual output selection and (2) LEDs. Green indicates that a display or other destination device is detected and the corresponding output is transmitting video. Amber indicates that a display or other destination device is detected but no video is routed to the corresponding output.
- FOLLOW: (1) Push button to enable or disable Follow Output mode and (1) LED. Green indicates that Follow Output mode is enabled, which causes a selected HDMI input to be routed to both HDMI outputs simultaneously.
- SETUP: (1) Red LED and (1) push button for display of IP address on connected HDMI outputs
- Ethernet: (2) LEDs on RJ-45 LAN connector.
- Link status LED: Green indicates that a 100BASE-TX link is established. Amber indicates that a 1000BASE-T link is established.
- Ethernet activity LED: Flashing amber indicates Ethernet activity.
- Power:
- PoE: IEEE 802.3at Type 1 (802.3af compatible) Class 0 (12.95 W) compliant, capable of being powered by PoE power sourcing equipment (PSE)
- Power Pack (Optional): 0.75 A @ 24 VDC; 100-240 VAC, 50/60 Hz; Model: PW-2407WU (sold separately)
- Power Consumption: 12 W typical
- Environmental:
- Temperature: 32° to 104° F (0° to 40° C)
- Humidity: 10% to 90% RH (non-condensing)
- Heat Dissipation: 40 BTU/hr typical
- Acoustic Noise: Not applicable (fanless)
- Construction:
- Chassis: Metal, black finish, vented sides
- Mounting: Surface-mountable or attachment to a single rack rail
- Dimensions:
- Height: 8.52 in. (217 mm)
- Width: 7.0 in. (178 mm)
- Depth: 1.34 in. (34 mm)
- Weight: 1.8 lb (0.82 kg)
- Compliance:
- Regulatory Model: M201946001
- Bureau Veritas Listed for US & Canada, IC, CE, FCC Part 15 Class B digital device
