Product Overview
When it's time for the show, Shure's dropout-free GLXD+ Dual Band Digital Wireless lets you take the stage with total confidence, providing rock-solid performance so you can focus on your message. The GLXD24+/B58 includes a tabletop receiver and a handheld microphone/transmitter with a Beta58 supercardioid capsule. The supercardioid pickup pattern delivers clear, focused vocals with excellent ambient noise rejection making it perfect for use in applications with traditional monitors and high stage volume levels. With its advanced Dual Band Wireless Technology, GLXD+ operates in the license-free 2.4 and 5.8GHz ranges, providing more than double the available bandwidth and intelligently avoiding interference. The GLXD24+/B58 is a tabletop system that's easy to set up and operate thanks to auto-pairing and Smart frequency management. The transmitter features a twelve-hour runtime battery making power concerns a thing of the past. Of course, things don't always go as planned. So Shure engineered the SB904 battery to deliver a 1.5-hour runtime from a 15-minute quick charge. And you have options because the SB904 can be recharged in the receiver's front panel or via USB-C while still in the transmitter. Get your GLXD24+/B58 today and experience the freedom!
Shure GLXD24+/B58 Applications:
Shure GLXD24+/B58 Includes:
- GLXD4+ Tabletop Receiver
- GLXD2+ Beat58 Handheld Microphone/Transmitter
Shure GLXD24+/B58 Features:
- Tabletop GLXD+ Dual Band receiver + handheld system.
- Beta58 supercardioid capsule
- Dual Frequency operation (2.4GHz and 5.8GHz).
- Very similar look and same features available in prior GLXD version.
Shure GLXD24+/B58 Specifications:
- System
- Compatibility
- With Frequency Manager: Up to 11 compatible systems in typical setting, and up to 16 under ideal conditions
- Without Frequency Manager: Up to 4 compatible systems in typical setting, and up to 8 under ideal conditions
- System Operating Range:
- Indoors: Up to 30 m (100 ft.) typical, with a maximum of 60 m (200 ft.) under ideal conditions
- Outdoors: Up to 20 m (65 ft.) typical, with a maximum of 50 m (165 ft.) under ideal conditions
- Transmit Mode: Shure Proprietary Digital - Dual Band (2.4 GHz and 5.8 GHz)
- Audio Frequency Response: 20 Hz – 20 kHz Note: Dependent on microphone type
- Dynamic Range: 120 dB, A-weighted
- RF Sensitivity: -88 dBm, typical
- Total Harmonic Distortion: 0.07%, typical
- RF Output Power: 10 mW E.I.R.P. max
- Operating Temperature Range: -18°C (0°F) to 57°C (135°F) Note: Battery characteristics may limit this range.
- Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)
- Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces
- positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 6,35 mm output.
- Battery Life: Up to 12 hours
- NOTE: All Specifications are subject to change. Performance may vary depending on country regulations and operating environment.
- GLXD4+ Receiver
- Dimensions: 7.2 x 4.8 x 1.6 in. (182.8 x 121.97 x 40.3 mm), H x W xD, antennas folded
- Weight: 10.9 oz (310 g)
- Housing: Molded Plastic
- Power Requirements: 14.5 V - 17 V, 600mA
- Spurious Rejection: >35 dB, typical
- Gain Adjustment Range: -20 to 40 dB in 1 dB steps
- Phantom Power Protection: Yes
- Configuration
- XLR Output, Impedance balanced
- 6.35 mm (1/4“) output, Impedance balanced
- Impedance
- XLR Output: 100 Ω
- 6.35 mm (1/4“) output: 100 Ω (50 Ω, Unbalanced)
- Maximum Audio Output Level
- XLR connector (into 600 Ω load): 1 dBV
- 6.35 mm (1/4“) connector (into 3 kΩ load): +8.5 dBV
- Pin Assignments
- XLR Output: 1=ground, 2=hot, 3=cold
- 6.35 mm (1/4“) connector: Tip=audio, Ring/Sleeve=ground
- RECEIVER ANTENNA INPUT
- Impedance: 50 Ω
- Antenna Type: Dual Band 1/2 Wave Sleeve Dipole, non-removable
- Maximum Input Level: −20 dBm
- GLXD2+/Beta58 Capsule
- Polar Pattern: Supercardioid
- Dimensions
- 51 mm, 2.0 in.
- 246mm, 9.9 in.
- 37 mm, 1.5 in.
- Weight: 225 g (7.9 oz), without battery
- Housing: Aluminum alloy, ABS plastic
- Power Requirements: 3.6 V Rechargeable Li-Ion
- RF Output Power: 10 mW E.I.R.P. max
- Maximum Input Level: 146 dB SPL