Product Overview
Add compact, portable, room-filling low end to your system with the PVs 12 powered subwoofer. 1,000-watts of onboard power driving a 12" woofer in a vented enclosure delivers chest-thumping bass down to 48 Hz because it's all about that bass. The high-density cabinet directs all generated energy toward the audience, producing more powerful low end with greater efficiency. Plus, the PVs 12 plays well with others thanks to a built-in crossover and high-pass output that ensures compatibility with a wide variety of speakers. Add Peavey's proprietary Bass Enhancement feature to the mix, and the PVs 12 outperforms any other subwoofer in its class. Steel handles, rugged locking casters, high-density MDF, and a heavy-duty steel grille make the PVs your reliable cohort for night-in-night-out performance. A pair of threaded pole mounts allow the cabinet to be deployed vertically or horizontally and provide flexibility with a variety of powered top-box sizes (sold separately). Internal DSP provides control over crossover functions, compression, limiting, and low-frequency EQ so you can dial in the perfect settings for room and system compatibility.
Peavey PVS12-SUB Features:
- Vented bass powered subwoofer enclosure
- 1,000 watts peak available power
- 12" Heavy Duty Woofer
- Bass Enhance button for increased bass impact
- XLR/quarter inch combo jack input
- Ground Lift for lifting cable shield from ground
- Full-coverage heavy-duty perforated steel grille
- Steel handles
- Power Amp has forced air cooling for maximum reliability
- DSP based crossover, compression, limiting and EQ
- Two High-Pass XLR outputs, One Full Range Thru XLR output
- Polarity Switch for polarity reversal of subwoofer
- Compact dimensions for a 12 woofer based sub
- Threaded Pole Mount with adjustable height speaker pole included
- Weight Packed: 76.06 lb(34.5 kg)
- Width Packed: 25"(63.5 cm)
- Height Packed: 19.3"(49.02 cm)
- Depth Packed: 27.5"(69.85 cm)
Peavey PVS12-SUB Specifications:
- Frequency Response, 1-meter on-axis, swept-sine in half space Environment (-6 dB):
- 53 Hz – 180 Hz (Crossover Control Full CW) 53 Hz –
- 90 Hz (Crossover Control full CCW)
- Low-Frequency range (-10 dB, half space): 48 Hz
- Power Amp Rating: 1,000 watts peak available power
- Sine wave Power: 500 watts into 4 ohms (Output duration is limiter controlled) Electronic Input Impedance (Nominal): Line In: 20 k ohms balanced (XLR or 1/4”), 10 k ohms unbalanced 1/4”
- Maximum Sound Pressure Level (1 meter in half space):
- 122 dB SPL continuous
- 125 dB SPL peak
- Transducer Complement: 12” premium heavy-duty woofer, 2.5” voice coil, 50 oz. magnet.
- Box Tuning Frequency: 50 Hz
- Input Connections: One combo female XLR/ 1/4” phone jack providing balanced or unbalanced operation.
- Electronic Input Impedance (Nominal): Line In: 20 k ohms balanced (XLR or 1/4”), 10 k ohms unbalanced 1/4”
- Output Connections: Two High Pass Outputs. One Full Range Thru.
- Controls: Level: Provides Off to + 20 dB gain adjustment
- Crossover Frequency Adjust: Adjusts electrical crossover frequency from 90 Hz to 180 Hz, in 15 discrete steps.
- Bass Enhance: Provides bass enhancement processing.
- Polarity Switch: Provides either Normal (0 degrees) or Reversed (180 degrees) subwoofer polarity. Ground Lift Switch for input.
- Linkwitz-Riley crossover variable from 90 Hz to 180 Hz. Low Pass slope: 24 dB/octave
- High Pass Output slope: 24 dB/octave
- Infrasonic Filter Slope:36 dB/octave
- Nominal Amplifier Frequency Response: +0, -3 dB from 20 Hz to 20 kHz
- Hum and Noise: Greater than 90 dB below rated power
- THD and IM: Typically less than 0.1 %
- Power requirements of Peavey PVs12 Sub System: Nominal 160 Watts, 100-120 VAC 50-60 Hz (Domestic) 220-240 VAC 50-60 Hz (Export)
- Enclosure Materials & Finish: Black acrylic painted enclosure with 15 mm MDF, with a full-length, black powder coated perforated steel grille. Eight rubber feet for floor use on the bottom and for on the left side.
- Dimensions (H x W x D): 21.82 in. x 14.38 in. x 20.13 in. 554 mm x 365 mm x 511 mm
- Net Weight: 57 Lbs. (25.9 kg)
- Mounting Provisions: Two 1 3/8” pole mounts with M20 threaded pole for stand mounting a suitable speaker on top of the Sub, and four large rubber feet on the bottom and on the side for floor use. Threaded pole is supplied with the unit.