CIOKS CIO-2050-I 20" 2050I Type 2 Flex Straight Power Cable

The pictured item shows a right-angle DC plug cable. The CIO-2050-I has a straight DC plug.

The CIOKS red type 2 Flex cable is fitted with center-positive 5.5/2.1mm DC plugs for use with older and positive ground pedals like Moofooger, Radial Tonebone, some Diamond and Blackstar pedals, and others. This 20" cable comes with a straight 10mm barrel for pedals with recessed power sockets or similar connection needs. A 12mm barrel version is also available.

CIOKS CIO-2050-I Applications:

• Pedals requiring type two cables
  • all Moogerfooger pedals *
  • all Radial Tonebone pedals *
  • all Radial active DI boxes, reampers, splitters, interface boxes that need 15V DC *
  • Diamond Halo Chorus, Memory Lane 1 and 2, ST-MIX, Phase, Vibrato and Bass Comp
  • new Blackstar for 22V DC
  • Empress Effects Superdelay and Vintage Modified Superdelay
  • version B of Jester, Juggler, Jouster and Constable from Kingsley
  • Roger Linn Adrenalinn I and II
  • All Effectrode pedals
  • Morpheus Droptune
  • plus others not listed here
  • Always check the manual or label on the pedal to get the polarity of the Flex cable right.
  • * With all Radial units and Moogerfooger pedals you can use the standard red type 2 Flex cable which is included with all CIOKS power supply models except the Adam. The included angled 10mm barrel plug might not give you the optimal connection to the pedal’s power input socket which are more or less recessed in these products. To power these we recommend using the red Flex cable in a version with a straight plug or the one with longer 12mm barrel. These two versions of the red type 2 Flex cable are not included with any of our power supplies and should be ordered separately.

CIOKS CIO-2050-I Specifications:

• 50cm (20″) with 5.5/2.1mm center positive straight DC plug (red)