Product Overview
The CONNECTSERIES 1504-G high-power IoT-enabled smart amplifier. This model comprises four channels, each capable of delivering 1,500 watts per channel (across 2, 4, and 8 ohms, as well as 70Vrms and 100Vrms). Available in Network and Dante configurations, it's important to highlight that the CONNECTSERIES 1504-G is specifically engineered for wired LAN connections and does not support Wi-Fi connectivity.
Additionally, the CONNECTSERIES G-Model stands out as the inaugural professional amplifier line to incorporate Cloud connectivity. This feature enables users to leverage Cloud capabilities for remote control, monitoring, notifications, and more, accessible from any personal device. By connecting the amplifier to a network, users gain the ability to oversee and direct their systems seamlessly.
LEA Professional CS1504-G Features:
- 1 WAY TO CONNECT: 1. Local Area Network
- WEB BROWSER-BASED UI: Works on any web browser on any device with no software downloads
- CLOUD CONTROL:Remote control and monitoring from anywhere in the world — no VPN needed.
- DIRECT LOW-Z & HI-Z: 70V or 100V selectable per channel
- SMART POWER BRIDGE: Double the power any any single channel without sacrificing other amp channels
- UNIVERSAL SWITCH-MODE POWER SUPPLY: with PFC — Operation from 100VAC – 240VAC +/-15%
- ANALOG BALANCED INPUTS: Fully routable via input matrix in Web UI or Cloud platform
- 96KHZ ANALOG DEVICES DSP: with linear phase FIR filters, up to 4 seconds of delay, Input Routing, multiple 48dB/Oct crossover filters, 8 Parametric EQ filters, user-configurable speaker limiters, and real-time load monitoring
- EXTERNAL I/O PORT: For Remote ON/OFF and Fault Monitoring
- HIGHLY EFFICIENT CLASS-D OUTPUT STAGE: For low AC Current Draw
LEA Professional CS1504-G Specifications:
- INPUTS: Analog: 4 Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity
- THD+N: 0.1% (20Hz to 20kHz)
- FREQUENCY RESPONSE: 20 Hz to 20 kHz, +/- 0.5 dB @ 4 Ω, 8 Ω, 70 V, 100 V, -2.5 dB @ 20 kHz at 2 Ω
- SIGNAL TO NOISE LEVEL: 105 dB (20 Hz to 20 kHz referenced to 8 Ω)
- CROSSTALK: 70 dB (20 Hz to 20 kHz)
- AMPLIFIER OUTPUT CLASSIFICATION: Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel
- DSP ARCHITECTURE: Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
- INPUT MATRIX: Routable matrix; any input to any output with primary and secondary input priority
- CROSSOVERS: Advanced DSP with Linear Phase Brickwall FIR Crossovers and up to 48dB/Octave IIR Filters (Linkwitz Riley and Butterworth)
- PARAMETRIC EQ: 8 Band Parametric EQ per channel
- OUTPUT DELAY: 4 seconds per channel
- OUTPUT PROTECTION: DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection
- USER ADJUSTABLE LIMITING: Peak Voltage and RMS Voltage
- LOAD MONITORING: Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources
- USER INTERFACE: Web Browser User Interface, 3rd Party API control, or CLOUD control
- EXTERNAL I/O: External I/O In: Toggles Remote On/Off, External I/O Out: Indicates Amplifier Health
- AC MAINS: 100 VAC - 240 VAC +/- 15% 50 Hz or 60 Hz
- POWER SUPPLY: Universal Switch Mode Power Supply with Power Factor Correction
- DIMENSIONS (L X W X H): Product: 17.88” x 19” x 2U (362 mm x 482 mm x 2U) (362 mm x 482 mm x 2U)
- WEIGHT: 26 lbs / 11.8 kg
- COOLING: Front to Rear Variable Fan Speed Cooling, Fan Noise at idle is 50 dB @ 1 m, Fan Noise at 50% is 57 dB @1 m, Fan Noise at full speed is 63 dB @ 1 m
