X-Laser SKYWRITER-HPX-M-2 2W intermediate aerial and graphics laser

The Skywriter HPX M-2 offers the most budget-friendly entry to X-Laser’s Mercury laser control system in a fixture built for the demands of the road.

Perfect for small to medium-sized productions, the Skywriter HPX M-2 delivers vibrant laser effects that can shine on their own or enhance other lighting effects. Lighting professionals can seamlessly incorporate the M-2 into their setups and synchronize it with other lighting components using almost any major console or lighting controller. With 2W of full RGB laser power, the Skywriter HPX M-2 is versatile enough for both indoor and outdoor use, catering to audiences of up to 1,000 people.

As the more economical and lower-power alternative to our top-selling Skywriter HPX M-5, the Skywriter HPX M-2, paired with our Mercury control system, enables extensive laser arrays with impressive functionality. This setup allows for stunning cascading movements and dynamic dimmer and color chases, all managed from a lighting console.

X-Laser SKYWRITER-HPX-M-2 Applications:

• Small to Medium Venues
• Rental
• Production
• Touring
• Indoor or Outdoor

X-Laser SKYWRITER-HPX-M-2 Features:

• 2W balanced RGB laser engine
• Single-mode, direct-injection diodes for great modulation and reliability
• Matched diode sets for better beam quality
• Mercury laser control system with the master and basic profiles including:
  • 450+ gobos
  • 11 digital prisms
  • 50 color macros
  • 60 motion macros with variable speed and amplitude
• 5-pin DMX
• Large, matte-finish LCD interface
• Art-Net connectivity (upgradable to our etherStop system)
• Sealed optical deck and rugged chassis reduce maintenance intervals, even during road use
• Rugged and compact anodized aluminum housing
• Double quality checked in a 26-point inspection prior to shipping
• X-Laser no-hassle warranty eligible (6 months for diodes, 1 year mechanical)
• Class 4 High-Powered Laser; FDA Variance required. EZ Variance Kit available separately
• Plastic molded road case with custom foam sold separately

X-Laser SKYWRITER-HPX-M-2 Specifications:

• Control: X-Laser Mercury control, ILDA
• Scanners: High-speed, closed-loop galvanometers, max scan angle 45 degrees, 30K PPS at 8-degrees
• Settings interface: Mercury LCD
• Color modulation: Analog, 1,000+ colors
• Laser energy: 2W raw (500mW R, 500mW G, 1W B)
• Beam source: Direct-injection diode modules
• Wavelengths: 638nm red, 520nm green, 445nm blue
• Physical: 15”W x 12.3”H x 9.4"L; 15lbs (381mm x 235mm x 260mm, 6.8kg)
• Housing type: Anodized 6061 aluminum
• Power draw: 40W typical, 85W peak
• Power: 150W PowerCON compatible in/out, 5x20mm 250V 6.3A fast-acting fuse
• Beam divergence:
• Cooling: Forced air through heat sink and TEC
• FDA/IEC hazard class: Class 4
• International safety: IEC 60825-1 ed. 2007
• FDA/CDRH:10 and 1040.11(c)
• Canadian safety: CSA C.22.2 No. 60950-1
• EU safety: EN 60825-1, EN 60950