Product Overview
Engineered for flexible, simple-to-deploy Digital Media Distribution and Switching solutions, the NMX-ENC-NC2312 Encoder is a feature-rich device that can be used in 4K applications with resolutions up to 4096x2160 with support for HDCP 2.2. Send sources to one or more displays by simply routing through layer-2 / layer-3 switches with standard Cat5e cable. Support sensitive applications, like live action, with the JPEG2000 encoding feature that provides low latency. Other standard features, such as input scaling, bi-directional serial, IR, embedded 7.1 audio, and KVMover-IP extension allow for greater quality output.
Add other system encoders and decoders for increased design flexibility, allowing you to start as small as 1x1 and grow in increments of single sources. Install quickly with Phoenix connectors for Power, IR, RS232 serial, and analog audio interfaces. Power NMX-ENC-N2312 independently with Power Over Ethernet (POE) or locally with 12 VDC compatible with rack mounting and high density installation. Additional adapters, connectors, and install mechanisms sold separately, see below or attached Data Sheet for details.
Features
- Power Over Ethernet (POE)
- Infared (IR)
- Embedded 7.1 audio (for balanced/unbalanced)
- Pass Through HDMI and Multiple Connection Options
- KVM with single USB-B
- NetLinx Studio native for easy recognition
Specifications
- General
- Dimensions: (HWD) 1.05” x 7.888” x 5.5”
- Weight: 1.6 lbs
- Regulatory Compliance: FCC, CE, and NTRL
- Mounting Options:
- Surface and wall mounting: Requires NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders and Decoders (sold separately)
- Rack mounting: NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side for SVSI N-Series Encoders and Decoders, or NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
- Video:
- Digital Video Input: HDMI 2.0, DVI-D, Dual-Mode DisplayPort (DP++)
- Analog Video Input: HD-15 VGA
- Video Output: Network video over Ethernet via RJ45 port or SFP via 1G SFP port, HDMI, DVI-D
- Formats:
- HDMI 2.0, DVI-D, Dual-Mode DisplayPort (DP++), HDCP 2.2 content protection support, RGBHV
- DVI-D and Dual-Mode DisplayPort (DP++) are supported through a passive adapter
- Audio:
- Input Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced)
- Output Signal Types: Ethernet, Embedded audio on HDMI or DVI-D (through adapter)
- HDMI Audio Formats: 8ch PCM
- Analog Audio Format: Stereo 2-channel
- Analog-To-Digital Conversion: 48 kHz
- Communications:
- Ethernet - PO: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
- Ethernet - P1: 1 Gbps port which accepts compatible fiber transceivers or direct attach cables, DHCP, Auto IP, and static IP
- HDMI: HDCP, EDID management
- Ports:
- +12V 2A: One 12 Volt DC power input
- P0 8-wire RJ45 female, 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port, Provides network connection, network AV video, and power to the Encoders and Decoders PoE power
- P1: 1-Gbps SFP port (SFP fiber transceiver or direct attach cable sold separately), Provides network connection and networked AV video
- IR IN (front panel): 3-pin terminal Phoenix connector. Provides Infrared (IR) input only and passes signal back to connected decoder (33-60 kHz; typically 39 kHz) IR receiver is necessary (sold separately)
- IR OUT: 2-pin terminal Phoenix connector, Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter is necessary (sold separately)
- RS232: 3-pin terminal Phoenix connector which provides a serial control interface. Full duplex communication, Available terminal speed settings: 1200-115200 baud rate
- AUDIO: 5-pin terminal Phoenix connector which provides userselectable balanced/unbalanced input, Dedicated audio input
- HDMI OUT: HDMI video output (passive pass-through from HDMI IN only)
- HDMI IN: HDMI video input
- VGA IN: DB15 analog input
