Electro-Voice Accessories

The Electro-Voice Mb200W is a wall/ceiling mount bracket kit for Electro-Voice Sx300, Sx100+, SxA100, and Sb121 speakers. This particular model comes in white wrinkle powder coat finish. Shipping weight is 8.5 lbs (3.86 kg).

The Electro-Voice Mb200 is a wall/ceiling mount bracket kit for Electro-Voice Sx300, Sx100+, SxA100, and Sb121 speakers. Comes in black wrinkle powder coat finish. Shipping weight is 8.5 lbs (3.86 kg).

The EBK-M10-3PACK is a set of three FORGED M10 Eyebolts, meticulously crafted to provide a reliable and robust anchoring solution for a variety of applications. These eyebolts are engineered for strength and durability, offering exceptiona ...

MB5 Wall/Ceiling Mounting Bracket Kit The MB5 Wall/Ceiling Mounting Bracket Kit features robust brackets and hardware that allow for a Zx5 loudspeaker to be quickly and easily mounted to a wall or ceiling in almost any position to obtain t ...

The Electro Voice RPK-82 Rough-in Mounting System includes an electrical junction box and flexible conduit for pre-wiring and installation when using plaster ceiling or sheetrock construction. This kit is meant to be used with the EVID C8. ...

The RMK2 kit from Electro-Voice is the specific 1U rack-mount kit designed to mount mount two RE3-RX receivers (sold separately) side-by-side into a 19" equipment rack. It contains all necessary items to couple and mount the units, with br ...

Electro-Voice's ETX-TCA-L truss adapter is used to suspend an ETX-12P, ETX-15P, or ETX-35P loudspeaker on 1.5-inch to 2-inch truss tubing. Electro-Voice ETX-TCA-L Includes: (1) ETX Powered Loudspeakers Accessory Guide (1) HEX L-KEY, 6MM, L ...

The EKX-BRKT15 is the official Electro-Voice EKX-15 & 15P Series loudspeakers Wall Mount Bracket kit. Electro-Voice EKX-BRKT15 Features: Custom-fitted for the EKX-15 & 15P Series Heavy-duty construction Includes screws & brackets ...

The Electro-Voice ELX200-BRKT is a wall mount bracket for ELX200 2-way models.

Amplifier assembly for the Electro-Voice ELX118P powered subwoofer.

The Electro-Voice ETX-18SP-CVR is a padded speaker cover designed for use with the Electro-Voice ETX-18SP subwoofer.

High frequency driver for the Electro-Voice XLE181 120° horizontal two-way compact line array element.

The Electro-Voice EBK1-M10-3PACK is a forged M10 3-pack short shank eye-bolt kit. Comes in silver.

The Electro-Voice 309A is a high-quality suspension shock mount built specifically for the RE20 & RE27 microphones. Designed to interface with all common studio mic arms. Color: Black.

The Electro-Voice ELX200-12-CVR is a padded cover for ELX200-12, 12P. Comes in black.

Electro-Voice XI1153/64 15" woofer.

Replacement 8 ohm diaphragm for high frequency drivers used on these Electro-Voice speaker models: SX SERIES TX 1122/1152 ELIMIATOR SERIES FM1202ER ZX1 ZXA1 S1202 FM1502 Replacement Kit for These Drivers: DH3 DH2005 DH2010 DH2010A As well ...

Electro-Voice's ZLX15CVR is a padded cover for use specifically with their ZLX-15 15" loudspeaker.

Electro-Voice's EVU-CDNL4 is a dual NL4 connector cover plate for use with their EVU Series speakers.

The Electro-Voice ELX200-18S-CVR is a padded cover for ELX200-18S, 18SP.

The Electro-Voice ASP-58 is an adjustable loudspeaker pole with a M20 thread. It is designed for use with EKX and ETX subwoofers.

Electro-Voice windscreen for PolarChoice gooseneck mics. It provides protection for the microphone from 'P' pops and wind noise.

White grille for the Electro-Voice EVID C4.2 two-way coaxial ceiling loudspeaker.

Protect your EKX-15 loudspeaker with the Electro-Voice EKX-15 Padded Cover. This cover will provide what you need to keep your speakers free from damage and dust. Electro-Voice EKX-15-CVR Features: Durable nylon constructed fabric Padded p ...

Stand clamp for use with all 3/4-inch diameter EV microphones (635A, RE16, RE200, N/D468). Color: Black

Electro-Voice's SC-ZX1 is a Speaker Slip Cover with Drawstring for use with their ZX1 Series speakers.

Protect your EKX-12 loudspeaker with the Electro-Voice EKX-12 Padded Cover. This cover will provide what you need to keep your speakers free from damage and dust. Electro-Voice EKX-12-CVR Features: Durable nylon constructed fabric Padded p ...

High frequency driver assembly for these Electro-Voice PA speakers. SX100+ SX200 SX250 SX300 SX500 TX1122FM Note: For Diagram, see part# F.01U.280.471

12 inch woofer for these EV loudspeakers: SXA100 SXA100+ SX100+E

18" woofer for the Electro-Voice EKX-18SP 18" powered subwoofer.

This is a padded cover for the Electro-Voice ELX200-15 2-way passive speaker or the ELX200-15P 2-way powered speaker.

Protect your EKX-15S loudspeaker with the Electro-Voice EKX-15S Padded Cover. This cover will provide what you need to keep your speakers free from damage and dust. Electro-Voice EKX-15S-CVR Features: Durable nylon constructed fabric Padde ...

The VSA-1 from Electro Voice is a strong arm mount designed to support the PX1122M, PX1152M, ZX4/5 (requires HA-5), and Plasma P1 speakers. It has a black finish for discrete mounting. This item replaces the PSA-V.

This is a padded cover for the Electro-Voice ELX115, a 15-inch, two-way full-range speaker.

Slip-on rubber hand grip for Electro-Voice ND series microphones. (FITS ALL WIRED HANDHELD N/D MICS) N/D167 ND257 ND267 ND357 ND457 N/D468 ND757 N/D767A N/D857B N/D967

Black mounting bracket for the Electro-Voice ZX1i Series loudspeaker.

The TCA-1 from Electro Voice is a truss clamp adapter for use with the VSA-1 strong arm speaker mount. It has a black powder-coat finish for unobtrusive mounting.

The EKX-18S-CVR is the official Electro-Voice padded protective cover for EKX-18S and 18SP Series loudspeakers. Keep them clean and free from blemishes for longer life! Electro-Voice EKX-18S-CVR Features: Heavy-duty nylon construction Padd ...

High frequency diaphragm for these Electro-Voice models: ELX112 ELX112P ELX115 ELX115P ELX215 ZLX-12 ZLX-15 ZLX-12BT ZLX-15BT EKX-12 EKX-12P EKX-15 EKX-15P Note: This HF diaphragm does not fit newer ELX200 Series.

The Electro-Voice DRC-2 is a convenient drum rim clamp for mounting microphones directly to a drum, eliminating the need for a dedicated mic stand or boom. The DRC-2 is designed to fit most metal drum rims. Its easy-to-use finger loop prov ...

Secondary input knob for these Electro-Voice loudspeakers: ZLX Series ETX Series

This is a padded speaker cover for Electro Voice ZXA1 and ZX1 models. This cover protects your speakers during storage, transport and setup / breakdown while on the road.

The Electro-Voice ELX200-10-CVR is a padded cover for the ELX200-12, 12P. Comes in black.

The Electro-Voice EBK-3 is a 3-pack forged 3/8-16 eyebolt kit.

Protect your investment with this padded nylon cover for the EV PXM-12MP coaxial monitor. Made of water-resistant nylon with padding on all sides, the PXM-12M-CVR protects against moisture, dirt, dents, and dings. Handle cutouts make load- ...

The TXA is a TA4-Female to XLR adapter that enables Electro-Voice wireless lavalier and headworn microphones to be used in hard-wired applications.

Electro Voice 323S "Soft" Stand Clamp for 1" Diameter Microphones. Compatible microphones include the RE50 plus, tapered mics - N/D967, 767a, 267a, 367s, RE410 and RE510.

Pole mount thumb screw for the Electro-Voice ZLX Series powered loudspeakers.

The Electro-Voice TC-21 is a tie clip for the Telex ULM-21 lapel microphone. Use this to position your microphone for best recording results.

LED Logo Kit for these Electro-Voice Live X series. ELX112 ELX112P ELX115 ELX115P ELX118 ELX118P ELX215 Note: Logo is the same for both passive and active speakers, but the passive models do not use LED light.

Black knob with red line for the Electro-Voice ELX Series portable speakers.

The Electro-Voice Mb300 horizontal array kit contains two brackets and eight of each of the following: 5/16-18 x 1 hex-head bolts, 5/16 lock washers, 5/16-18 nuts. This particular model comes in a black wrinkle powder coat finish. The Mb30 ...

Rough in plates for EVID Ceiling Speakers Kits for rough-in pre-install when using sheetrock or plaster ceiling construction. RR-42: Rough-in mounting plate for use with the EVID C4.2 (package of 4) RR-82: Rough-in mounting plate for use w ...

The CB5 Array Rigging Kit features array brackets and hardware that allow you to array any Zx5 system. Its assembly is quick and easy with the hardware already provided on your Zx5 Loudspeaker.

HDC-5 is a heavy duty cover that fits the Zx5 and Zx4. Designed to protect the enclosure during storage, the HDC-5 has heavy duty padding on all sides. HDC-5 utilizes durable 1000D Black Cordura laminated to foam. The HDC-5 has a built-in ...

Includes shoulder strap and accessory pockets. Two can be combined for carrying two speakers at once.

379-1 Black windscreen pop filter for MC series, RE16, RE50, N/D967, 767a, 367s, 267a, RE410 and RE510

The Electro-Voice ASP1-302055000 is a 31-5/8" - 55" H adjustable subwoofer shaft / speaker pole.

The WS-97 Foam Windscreen for Electro-Voice RE-97 headworn microphones. Color: Beige

Microphone stand adapter for the PL33 microphone. Also fits RE20, RE27N/D and N/D868.

Isolating shock mount stand adapter for the PL37 condenser microphone. Also fits RE200.

Foam windscreen for PL33 kick drum microphone. Also fits RE20 and RE27N/D. Black. Optional item.

Image is for illustrative purposes. The item featured is the tie clip portion of the lapel microphone set.

The Electro-Voice TSS-1 is an aluminum tripod speaker stand with a reversible shaft with 1-3/8" to 1-1/2" (34.9mm to 38mm) diameter tubing. The TSS-1 is height adjustable from 44"-70" (1117.6 mm - 1778 mm) and has a maximum weight capacity ...

18" woofer for the Electro-Voice ELX118P subwoofer.

The Electro-Voice EVF-UB Wall/Ceiling Mounting U-Bracket Kit features a robust bracket and hardware that allow for an EVF loudspeaker to be quickly and easily mounted to a wall or ceiling in almost any position to obtain the desired sound ...

The Electro-Voice EVF-UB Wall/Ceiling Mounting U-Bracket Kit features a robust bracket and hardware that allow for an EVF loudspeaker to be quickly and easily mounted to a wall or ceiling in almost any position to obtain the desired sound ...

Multi-port windscreen for the Electro-Voice PolarChoice Series desk microphone.

15" woofer for these Electro-Voice loudspeakers: ELX115 ELX115P ELX215

High frequency driver ( DH-1K ) for these Electro-Voice speakers: ELX112 ELX112P ELX115 ELX115P ELX215

Amp assembly for the Electro-Voice ZXA1 powered loudspeaker.

4-pin phoenix connector for these Electro-Voice Evid models: C4.2 C8.2 EVID 3.2 EVID 4.2 EVID 6.2 ZX1i

Tweeter for the Electro-Voice Evid 4.2 and 6.2 surface mount loudspeakers. Note: This tweeter will not fit original generation.

Fuse holder for Electro-Voice SBA760 speaker.

High frequency driver with horn for the Electro-Voice EVU Series loudspeakers.

12" woofer for the Electro-Voice ELX112P and ZLX-12P loudspeakers.

Crossover network for the Electro-Voice ELX215 loudspeaker.

Amplifier assembly for the Electro-Voice ELX112P powered speaker.

Woofer for the Electro-Voice ZXA1 and ZX1i speakers.

Amplifier assembly for the Electro-Voice Live X ELX115P loudspeaker.

Black rubber snubber for the Electro-Voice RE50 microphone.

Mounting tab for these Electro-Voice speakers: C8.2 PC8.2

18" woofer for the Electro-Voice EVX-180B speaker and the Dynacord Cobra-PWH loudspeaker.

Diaphragm replacement kit for these Electro-Voice drivers: ND6A-16 DH7N-16 DH5-16 DH5-16-WPX DH6-16 DH7-16 N/Dym5-16 ND5A-16DH1A-16 DH1AMT-16 DH2012-16 NDYM1-16 NDYM1MT-16 ND6X-16

Woofer for these Electro-Voice speakers: ZX5-60B ZX5-90B ZXA5 Note: This woofer replaces the DVX3150 woofer.

12" woofer for Electro-Voice speakers: SX200 SX300 QRX EVI-12

SMX2151 15" woofer for these Electro-Voice loudspeakers: TX1152 TX2152 ETX35P

Crossover for the Electro-Voice EVU-1082 loudspeaker.

Amplifier module for the Electro-Voice ZLX-15P powered loudspeaker.

Electro-Voice PolarChoice Satellite 12 microphone main button.

Knurled top thumbscrew for the Electro-Voice 309A shockmount.

Mounting bracket for the Electro-Voice EVID 6.2 loudspeaker.

High frequency driver for these Electro-Voice loudspeakers: SX100 ZXA1 ZX90 ZX1

SK3 wire fuse for the Electro-Voice ELX series loudspeakers.

Black strong arm mount for the Electro-Voice EVID 4.2 loudspeaker.

White grille for the Electro-Voice C8.2 ceiling speaker.

Woofer for these Electro-Voice loudspeakers: PX2181 ETX-18SP

Crossover for the Electro-Voice ELX115 speaker.

The Electro-Voice ETX-15P-CVR is a padded speaker cover designed for use with the Electro-Voice ETX-15P loudspeaker.

The Electro-Voice ETX-35P-CVR is a padded speaker cover designed for use with the Electro-Voice ETX-35P loudspeaker.