Connectors, Adapters & Bulk Cable

Link USA's LK-40-TPF dust cap is for connectors with locking rings. Link USA LK-40-TPF Includes: LK-40-TPF Dust cap Link USA LK-40-TPF Features: For connectors with locking ring

The Neutrik NA4MP-J is a speakon NL4MP to locking 1/4" jack (Tip, Sleeve contact) adapter. Features D shape adapter solves various intermating problems for professional and semi-professional applications Rugged aluminum extrusion housing f ...

Ideal when you need to adapt 3.5mm stereo headphones for use in a 6.3mm (1/4in) stereo jack. Cables To Go 40639 Adapter Specifications: Connector 1: 3.5mm Stereo Female Connector 2: 6.3mm (1/4") Stereo Male Warranty: Lifetime Color: Silver ...

The Blackmagic Design HYPERD/AXLRMINI2 Video Assist Mini XLR Cable set provides two adapter cables designed for seamless integration between the Blackmagic Video Assist and professional audio equipment that use full-size XLR connectors. The ...

Neutrik's NE8FBH-LED is a fully shielded, horizontal PCB mount RJ45 receptacle with B-Series cutout and latch lock, max. panel thickness 3 mm. The Lighted ethercon offers a closed metal housing to avoid EMI or cross talking and two light p ...

Platinum Tools' patented EZ-RJ45 Cat 6+ Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Elect ...

Colored boot for PX-Series Neutrik connector.

The Canare BN7046 is a crimp sleeve for Canare's BCP-B53 BNC crimp plug.

Switchcraft’s® right-angle RCA plugs (3502RA) features an easy-to-assemble three piece construction: a handle, insulator and plug assembly. The plug features a solid-pin design and large solder terminals that make termination faster and ...

Switchcraft's S5F3M is a 5-pin female to 3-pin male DMX barrel adapter.

West Penn's CN-BM53-25 is a 3-piece BNC connector designed for RG-59 Thinnet cable. West Penn CN-BM53-25 3-Piece BNC Connector Features: All pins can be crimped or soldered Gold captivated contacts Knurled tail on body UL listed West Penn ...

Front mount solder type phono (RCA) jack. Red color. [Similar model pictured above]

The RX Series is the right-angle version of the XX cable connector series. The successor of the RC series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relie ...

3 pole female XLR receptacle, plastic housing, pin 1 connected direct to chassis and shell ground, horizontal PCB mount. The new `State of the Art` receptacle. Smallest size / highest packing density. New designed contacts with hard gold p ...

The Shure A15RF In-Line RF Attenuator provides all types of balanced audio sys-tems with greatly improved immunity to radio frequency interference (RFI). It is especially useful in applications where balanced audio devices near strong RFI ...

EIA Standard 2-conductor Tini-Jax phone jack input to a standard 1/4" 2-conductor phone plug output. Shielded.

This filter rolls off low audio frequencies to reduce 60 Hz electrical hum, low-frequency wind noise, air conditioner noise, or stand- and floor-transmitted low-frequency vibrations. When loaded with a low-impedance microphone input (800 o ...

Colored bushings for X-Series.

Colored bushings for X-Series XLR connectors.

This GXX-195 adapter from Hosa is designed to reverse the polarity of a line-level signal and is perfect for eliminating phase-relatied interface. Specifications Connectors: 3-Pin XLRF to 3-Pin XLRM

3 pole male XLR receptacle, plastic housing, horizontal PCB mount. The new `State of the Art` receptacle. Smallest size / highest packing density. New designed contacts with hard gold plating and polished contact areas. TF-contacts. Latch ...

5 pole male TINY XLR receptacle with nickel plated housing and gold plated contacts. REAN RT5MP Specifications: Electrical: Contact Resistance: ≤10 mΩ Insulation Resistance: >1 GΩ Insulation Resistance: >500 V rms Rated current per con ...

The SCNAC-02 D-size rubber sealing cover is specifically designed to safeguard powerCON 20A chassis connectors, such as the NAC3MPXXB* and NAC3MPB-*, from dust and water, meeting IP 65 protection standards. Its user-friendly design ensures ...

The SCMX-TOP rubber sealing cover is specifically designed to protect XLR male TOP connectors, including the NCMX-TOP series and the etherCON TOP cable connector NE8MX-B-TOP, from dust and water ingress. Compliant with IP65 protection clas ...