Connectors, Adapters & Bulk Cable

The Philmore 45-162G is a 3-pack of bulkhead gold-plated RCA jacks with 0.375" mounting holes. 1 each: red + white, yellow.

1/8" mono plug to 1/8" stereo jack.

The MS20c Splitter / Combiner / Isolator will split a single balanced XLR signal into two isolated signals, combine two balanced XLR signals together into a single, or simply isolate a balanced line for buzz or hum elimination. Please note ...

The Connectrix system connectors may be used in any of the Connectrix panels utilizing the popular mounting patter of the Neutrik "D" or Switchcraft "E" series mounting patterns. Connectors using the generous rectangular Connectrix cutout ...

The Connectrix system connectors may be used in any of the Connectrix panels utilizing the popular mounting patter of the Neutrik "D" or Switchcraft "E" series mounting patterns. Connectors using the generous rectangular Connectrix cutout ...

The AV-HK1X is a mono transformer isolation module for use with a balanced, low impedance source and either a low or high impedance load. Input and output connections are provided on XLR jacks with gold-plated contacts. The shield (pin 1) ...

Aquaseal communications cable, 500 ft. 22/2 stranded bare copper conductors, shielded with an Aquaseal tape and overall jacket. Suitable for outdoor use. See data sheet for specifications.

Two-conductor miniature phone plug. Solder lug terminals. Overall length is 1-5/8". Dimensions are 9/16" x 1/8".

22/4 Stranded bare copper conductors, shielded with an overall jacket. Ideal for intercom, security, sound, audio, background music, and power limited control circuits. Specifications Construction Parameters Conductor: 22 AWG Bare Copper S ...

The MiniCon with its flexible and compact design is perfectly suitable for multipin / industrial applications. The rugged all metal miniature connector offers a push-pull locking device and stands out by an excellent cost/performance ratio ...

2c. 24 AWG ultraflexible live microphone bulk cable. 656 ft., black, factory spooled.

The “connectrix system” connectors may be used in any of the “connectrix” panels utilizing the popular mounting pattern of the Neutrik “D” or Switchcraft “E” series mounting patterns. Connectors using the generous rectangul ...

The Kramer AD-HF/HF is a HDMI(Female) - HDMI(Female) Adapter

3 pole male EMC-XLR cable connector The EMC-XLR Series is a specifically designed version of the XX series to give enhanced RF screening for critical applications in live performance and recording where there are particular problems with r ...

The Neutrik BSE-1 is a brown boot for NE8MC and NE8MC-B RJ45 connectors.

Colored bushing for NE8MC and NE8MC-B.

Colored bushing for NE8MC and NE8MC-B.

The West Penn 25296B-1000 is a 12/2 Stranded bare copper conductors, shielded with an overall jacket. For use Indoors within ducts, plenums and other spaces used for environmental air for Intercom systems, security systems, sound, audio, a ...

The 13595 6-pin headset connector assembly allows the technician to easily add a 6-pin female XLR-type connector (Switchcraft pin arrangement) to Model 200-Series Announcer's Consoles. It provides support for headsets that use 6-pin plug f ...

Black plastic body with molded strain relief, solder terminal. Maximum cable O.D.: 4.0 mm.

Whirlwind's SP1X3LL is a 1 x 3 line-level splitter that provides one direct and two transformer-isolated outputs from a line-level input. The signal level at each transformer isolated output is 6 dB lower than the level of the direct outpu ...

Common twist-on type "F" connectors for RG59/U wire, packaged in an attractive space saving blister card (2-7/8" x 3-3/4"). Blister cards are printed with a full description and clear terminating instructions on back of card. ...

Applications (Indoor) Intercom Systems Security Systems Sound and Audio Background Music Power - Limited Control Circuits Features ASTM bare copper PVC insulation Short overall twist lengths PVC fillers as required Polyester binders as req ...

Whirlwind's SPC82 features (1) direct and (1) isolated output, and has the ability to pass phantom power from direct in to direct out. These splitters from Whirlwind are the ideal, expandable solution for any permanent installations. Each ...