Stands, Racks & Mounts

The 10.4-inch wide steel utility shelves, featuring a vented base, are specifically designed to be compatible with Lowell LHFR Series half-width racks. These shelves come in three different depths, providing options to suit various equipme ...

The low profile 1U x 19-inch panel is constructed with steel and coated in a black powder epoxy finish. It is equipped with four blower fans that operate by drawing air from within the rack and expelling it through the front vents. For enh ...

The sturdy, open-design, space-saving NR2P-4515 dual-post networking rack from Lowell is ideal for closet machine racks in IT departments, telecommunications, broadcast, and recording studios. 3" wide steel channel rails secure your gear w ...

The sturdy, open-design, space-saving NR2P-4518 dual-post networking rack from Lowell is ideal for closet machine racks in IT departments, telecommunications, broadcast, and recording studios. 6" wide steel channel rails secure your gear w ...

The sturdy, open-design, space-saving NR2P-5215 dual-post networking rack from Lowell is ideal for closet machine racks in IT departments, telecommunications, broadcast, and recording studios. 3" wide steel channel rails secure your gear w ...

The sturdy, open-design, space-saving NR2P-5218 dual-post networking rack from Lowell is ideal for closet machine racks in IT departments, telecommunications, broadcast, and recording studios. 6" wide steel channel rails secure your gear w ...

The sturdy, open-design, space-saving NR4P-4530 Four-post networking rack from Lowell is ideal for closet machine racks in IT departments, telecommunications, broadcast, and recording studios. 3" deep steel channel rails secure your gear w ...

The sturdy, open-design, space-saving NR4P-5236 Four-post networking rack from Lowell is ideal for closet machine racks in IT departments, telecommunications, broadcast, and recording studios. 3" deep steel channel rails secure your gear w ...

This tilt-open, recessed wall-mount rack is designed for holding amplifiers, mixers, PA systems, or electronics, with a 3U x 20-inch vertical storage compartment. Easily service or operate equipment by lowering the bay with the handle. A r ...

The rough-in bridge, designed for new construction, is installed on joists, rafters, trusses, or metal rails before drywall ceilings to reserve space for Lowell speaker models ES-52T or ES-62T (sold separately). Its lightweight yet sturdy ...

The 19-inch rack shelf, with a sturdy base and reinforcing flanges at both ends, includes rear notches for an optional 12-inch power strip installation. Made from steel with a black powder epoxy finish, it comes in two depths (10.75 in., 1 ...

The LER Series 19-inch AV rack, made from fully welded U.S. steel and reinforced for strength, features vented side panels for cooling. It includes adjustable rails for equipment fitting and has beveled corners with a black textured epoxy ...

Mount your AcousticDesign Series landscape speakers securely to the ground using the QSC AD-DWL.BASE accessory base. Specifically designed for AD-DWL.180, AD-DWL.360, or AD-DWL.SUB speakers/subwoofers, this base provides a stable platform ...

The steel blanking panel, designed for 19-inch AV racks and featuring a flange, comes in a textured black powder epoxy finish. Made from 18-gauge steel, it is offered in various sizes ranging from 1 to 7 rack units. Each panel is carefully ...

The fully-vented rear door is designed for 23-inch wide Lowell racks (LER, LFR, LGR, LSER, LSGR Series) and is usually purchased separately, as racks often come without a standard rear door. This door can be installed to swing either left ...

The surface-mount enclosure, designed for the Lowell DC802 Series digital clock/speaker center, is made of steel and finished with white powder epoxy. It comes with a partial foam pad for the speaker section. Lowell SE1275 Specifications: ...

The LGR-4436 is a Rack Gangable 44U 36" Deep, 2pr Rails, with Rear Door, in Black from Lowell. The gangable AV rack is constructed from fully-welded 16-gauge steel, with a reinforced 14-gauge steel base for sturdy support at load-bearing p ...

The SDP-4436 is a Rack Side Panel, 44U 36" Deep, 1 pair from Lowell. The solid side panels for Lowell 22-inch wide and 23-inch wide racks are U.S. steel construction with black wrinkle textured powder epoxy finish. Panels include integral ...

For more than ten years, OSP has been offering top-notch cases at budget-friendly prices. Whether you're touring nightly, managing a portable church setup every Sunday, or just moving your amp across town for a gig, an OSP Shock Rack ensur ...

The Lowell LGR-3532 is gangable AV rack, featuring a sturdy 14-gauge steel base reinforced at load-bearing points, ensures reliable support. It offers a configurable top opening and comes with two panels that can either close the top or be ...

Lowell SDP-3532 solid side panels, designed specifically for Lowell 23-inch wide racks. Crafted from sturdy U.S. steel and finished with a black wrinkle textured powder epoxy coating, these panels feature integral handles for easy handling ...

The Lowell CMV5-35 Vertical Panel 5x35 6-Pack, crafted from 100% certified U.S. steel with a durable 16-gauge construction and sleek black powder epoxy finish. Ideal for telecommunications, audio-visual, and broadcast environments, these p ...

The Lowell RCCD4636 is a low profile wall cabinet built in the U.S.A. from 16-gauge certified steel, designed to securely house 19" E.I.A. network equipment while maximizing space efficiency. The cabinet features two mounting bays: a 4U up ...