Stands, Racks & Mounts

The Lowell LER-4422-LRD is a 44 Rack Unit stand-alone floor rack that is 22" deep. It features fully welded 16-gauge steel adjustable rails with a 14-gauge base. This unit is reinforced at all load-bearing junctions. Lowell LER-4422-LRD Fe ...

The Lowell LTR-320S is a tilt-open wall rack for amplifiers, mixers, PA systems, or consumer electronics. It stores 19 inch wide equipment out of the way. Hold it vertically until front panel is lowered for operation or servicing. This uni ...

The Lowell IX810 is an acoustic enclosure made to direct-mount an 8" speaker. This unit allows a heavier speaker to be used with a non-loadbearing torsion grille. The featured larger-than-average volume and acoustic treatment allow an 8" s ...

The Lowell RE1175-T is a backbox for recessed installation in ceilings or walls. It features torsion spring receptacles for use with torsion grilles. Lowell RE1175-T Specifications: Material: Formed from single piece 20-gauge steel Finish: ...

Lowell's LER-2127 is a 21U stand-alone floor rack with adjustable rails. This 27" deep enclosed rack is made from fully welded 16-gauge steel with a 14-gauge base, and is reinforced at all load-bearing junctions. Features Welded top with v ...

Lowell LSB-27 Stationary Platform Rack Base for 27” Deep Racks Often required to support heavy equipment that is mounted in the lowest rack space, the LSB-27 stationary base is designed to mount inside the rack frame to provide a floor p ...

For superior access to equipment in cabinets or millwork, the LPTR2-1419 Pull & Turn Rack from Lowell is ideal for built-in applications. The top section of this 14U rack slides forward and turns (left or right), locking at several positio ...

The SP-4 from Lowell is a member of their SP Series that is an 18-guage steel rackmount panel with flange. This blank steel panel is intended for use in 19-inch wide racks. NOTE: Actual product may vary in appearance and specification. For ...

The RDM222­™ from Elation Pro Lighting is a Dual-Unit Single rack-mount kit designed for Elation's RDMX6S™ 6-Way RDM/DMX splitter (note: RDMX6S and rack screws sold separately).

The LDR-1824 is a 19 inch equipment rack. It is an elegant design for boardrooms and home theaters. This ready-to-use rack includes leg levelers, lockable side panels, a rear access cover, and a tempered glass front door. Charcoal grey tex ...

The RK55 Rackmount from Samson (SKU: SWR55) is part of their AirLine Pedal & AirLine 77 accessorty offerings. This Rackmount Kit can hold up to two CR77 Receivers and is suitable for Stage 5, Stage 55, AirLine 77 & Concert 77 wireless syst ...

Lowell's LCR-1218 is a rugged welded rack for credenzas or cabinets constructed from a 16-gauge certified U.S. steel frame with 11-gauge corner post rails. Engineered for electronics stored in credenza style cabinetry, or underneath counte ...

Lowell's VDS-2-2032 Variable depth shelf is a 19-inch rackmount shelf that can be expanded from 20-32 inches deep. It provides heavy-duty support for non-standard equipment and mounts to front and rear rails. Lowell VDS-2-2032 Includes: VD ...

Lowell's LSER-4427 seismic rack is a fully welded 16-gauge steel stand-alone rack with a 14-gauge base. It features enclosed sides and adjustable rails. Lowell LSER-4427 Includes: LSER-4427 Seismic Rack Lowell LSER-4427 Features: Configura ...

Lowell's USV-214 Utility Shelf is a rugged steel shelf that provides support for non-rackmount equipment. Lowell USV-214 Includes: USV-214 Utility Shelf Lowell USV-214 Features: 16-gauge steel with fully vented base Notches in rear flange ...

Lowell's LVR30-2128 Vari-Rack is a slim rack that can be adjusted for a custom fit. The top and base can be set to any depth between 21-28 inches. Ships unassembled. Lowell LVR30-2128 Includes: LVR30-2128 Vari-Rack Lowell LVR30-2128 Featur ...

Lowell's LXR-3026 slim rack is an open-framed rack that is for 19" equipment. It is made to fit where standard racks may not. Lowell LXR-3026 Includes: LXR-3026 Slim rack Lowell LXR-3026 Features: 14-gauge certified U.S. steel frame 11-gau ...

Lowell's LXR-3821 Slim Rack is an open-framed rack that fits 19" equipment. It is designed to fit where a standard rack may not. Lowell LXR-3821 Includes: LXR-3821 Slim Rack Lowell LXR-3821 Features: 14-gauge steel top/base 11-gauge steel ...

Lowell's LPOR4-1219 pull-out rack is designed to be used in cabinets or custom millwork. The top section of the rack slides forward for easy access to mounted electronics. Lowell LPOR4-1219 Includes: LPOR4-1219 Pull-Out rack Lowell LPOR4-1 ...

Lowell's LXR-2221 Slim rack is an open framed rack for equipment that is 19 inches. It is designed to fit where a standard rack may not. Lowell LXR-2221 Includes: LXR-2221 Slim rack Lowell LXR-2221 Features: 14-gauge steel top/base 11-gaug ...

Samson provides the MBA28 Microphone Boom Arm, the perfect microphone accessory for any radio, podcast or home studio setup. Its articulating design provides a maximum horizontal/vertical arm reach of 28", giving users convenient flexibili ...

The Lowell LER-4432 is a fully welded stand-alone floor rack reinforced at load-bearing junctions for robust support. The welded side panels feature upper and lower vents for passive ventilation. The rack includes adjustable mounting rails ...

Lowell's LPTR4-2119 is a pull-out rack that can be used in cabinets or millwork. The top of the rack slides forward and turns left or right, and is able to lock at several positions. Lowell LPTR4-2119 Includes: LPTR4-2119 Pull & Turn rack ...

Lowell's LFD-10P Front Door (smoked plexiglass) is a reversible surface-mount front door for Lowell racks. It can be mounted with either a left or right-handed swing. Lowell LFD-10P Includes: LFD-10P Front Door (smoked plexiglass) Lowell L ...