Test Equipment & Tools

ACE'S “CONNECTRIX" Connectors may be used in any "CONNECTRIX" Panel(s). The "CONNECTRIX" System combines the popular mounting patterns of Neutrik® “D” and Switchcraft "E" series connectors with a generous rectangular cutout which ma ...

DeoxIT ® Wipes, 100%, 50 individual wipes. Unique contact cleaner, rejuvenator, conductivity enhancer and lubricant; dissolves oxidation and corrosion on metal surfaces, fills in microscopic gaps and reseals surface for better contact to e ...

The Radio Design Labs AMS-10KA is an accessory equipped with a single-turn knob for a user to adjust the audio level. It is designed for the adjustable attenuation of an unbalanced audio signal. The AMS-10KA contains a long-life 10 kO audi ...

Professional all-in-one cutter and stripper for both twisted pair and coaxial cables! Features: Cuts UTP/STP and coaxial cables Strips Cat6, Cat5e, Cat5 Strips RG6, RG6 Quad and RG59 coaxial cables for 2-level cable TV "F" connectors Advan ...

Features: Works with the adjustable coaxial stripper 45-526 For F-Type, many single crimp BNC/TNC, Twist-on BNC/TNC, Twinax and UHF connectors Strips 0.250" (6.3mm)

Spare set of keys for USC-KL remote wallplate keyswitch.

Specifications: Type SPST Actuator Rectangular Plastic Current Rating: 8A@ 125V AC, 5A-250VAC, 6A@ 24V DC, .2A@ 250VDC Initial Contact Resistance: AC-1A 10 Meg ohms Insulation Resistance: 5000 VDC 1000 Meg ohms Insulation Voltage: 4000V, 6 ...

All the tools needed to cut, strip and install RG58, RG59, RG62, RG6 cable, and center pin, in a convenient storage and carrying case. Includes: WS36 Ratchet Crimp Tool WS145 Stripping Tool WS50 Cable Cutter

3-level coaxial cable stripper for Kings and Amphenol BNC connectors. Features: Pre-set strip lengths: A=.327" (braid), B=.146" (dielectric)

Replacement blade cassette (for 1281 Coax Stripper) Features: Pre-set lengths: A=.279", B=.201"

Radio Design Labs' PT-TLS2 is a replaceent test lead set of cables designed for use with their PT-AMG2 Portable Audio Signal Generator & Monitor.

Goldline's EZTune combines features from several existing TEF programs, and then adds a layer of automation to speed up typical tasks. For those who wish to change standard settings, you are free to do so. Or, if you need to send staff int ...

Neutrix's HTPXS is a hand tool to hold the barrel of the PX series while the boot is tightened. With the HTXP, the boot can be closed while with the HTPXS the barrel can be hold up for proper tightening.

Speakon Cable Tester BLOX

Unbalanced 1/4" cable tester BLOX

XLR cable tester BLOX

Phantom Powered Flashlght BLOX

Remote switch, mounts in Middle Atlantic Products Decora opening.

The ZM-104A Impedance Meter can measure the impedance of speaker lines easily, in the same manner as a circuit tester measures resistance. Requires four AA batteries. Includes: Accessory Test leads ---1 set Carrying case Impedance to power ...

Glue for securing SONICHSHOCK-PLASMA and SONICSHOCK-4 to appropriate surface. Will glue 6 SONICSHOCK devices.

These keys are a required purchased for the SONICSHOCK-PLASMA and the SONICSHOCK4.

TrapLine includes the TrapLine Sensor and a 1.5 metre (5 foot) sensor line extension. TrapLine requires one Sonic Shock alarm to function. You can, however, daisy chain an unlimited number of TrapLine sensors, all monitored by one Sonic Sh ...

Hole cutter attaches to standard drill and creates perfect 1.5" and 2" holes in ceiling tiles. Hole cutter can also be used manually. Includes black escutcheon ring. Features: Creates 1.5" and 2" holes in ceiling tiles Cutting device attac ...

Tackle all of your compression crimping jobs with Paladin Tools' complete SealTite® Pro Kit. Includes all the tools you need to prepare the cable and terminate any compression connector using RG59, RG6 or RG6 Quad shield cables: Includes ...