Pedals & Effects

Power your vintage Electro-Harmonix, DOD, WAH, and RAT pedals with the type 5 flex cable. This 12" cable comes with a right-angle 3.5mm mini plug and is also available in lengths of 6" and 20" as well as a 20" straight plug version for ped ...

The KA390US 12v 2500mA USA Prongs Complete Power Supply is an essential accessory for powering various electronic devices. With its 12-volt output and 2500mA capacity, this power supply ensures reliable and stable performance for a wide ra ...

You've painstakingly selected the perfect pedals to sculpt your tone. They're power hungry, so feed them well. Don't rely on mismatched batteries at multiple stages of wear. Get the power supply designed to support your tone, the Mini Iso- ...

The PSL-PB18 is an essential component designed to streamline signal distribution and power supply management for Limitimer systems. With its 8-port configuration, this distributor efficiently channels signals to multiple devices, ensuring ...

 

The DSA-PW is an external 12V Switching Power Supply designed to provide reliable and efficient power to various electronic devices and equipment. Ideal for applications requiring stable DC voltage, this power supply ensures consistent per ...

AC/DC Adapter - Input 120VAC Output 12VDC @ 500mA. Output connector 3.5mm phone plug, tip positive. Dimensions: 2.6" H x 1.93" W x 1.73" D For use with the following Goldline products: 30M8 30MP FD23 HPAJR MX4 PN2A PN2WA PN3B PWN1 SLC1/2 S ...

Six interchangeable plugs are included with the unit to serve most power-up needs. Features: Plug-in Polarity Reversal Plugs into 120VAC / 60Hz house current 6-1/2 foot cord Circuit employs full range bridge rectifier with filter capacitor ...

The Bag End MPS120 is an external power supply unit for use with their INFRA-M and INFRA-M2 processors.

No professional video power supply on the market is as powerful as the IA-300a power supply. With 200 Watts of power at 15 Amps, this power supply can handle any job. This unit is especially popular with Laptop editor users, due to the pow ...

Whirlwind's SELECTOR is a box that gives you the ultimate control over your instruments and your gear. You can alternate between channels A and B or select both. Send one guitar to two amps or use it the other way around to select between ...

Shape your sound and eliminate feedback with seven bands of equalization. Includes frequencies ranging from 100Hz to 6.4kHz with a powerful 15dB boost/cut per band. Boss GE7 Specifications: Nominal Input Level: -20 dBu Input Impedance: 1 M ...

Detachable power supply with Lectrosonics TB5M connector. The TR79 power supply provides a balanced transformer output to an XLR connector and uses an Eveready 357 battery. The battery compartment is designed to permit only one insertion d ...

This FSC-501 Hosa footswitch with all-metal chasse and reinforced switch is designed to withstand years of travel and use. Complete with a 10' hardwired cord with 1/4" TS connector, this footswitch is designed for guitar amp channel switch ...

This adapter and cable provides a universal power source for equipment such as portable audio mixers, DAT and voice recorders.

The WA100-1 is a 120Vac 60HZ wall mount power supply for NanoAmps. Audio Technologies WA100-1 Features: UL, CSA and VDE Suitable for NanoAmps 120Vac 60HZ wall mount power supply Audio Technologies WA100-1 Specifications: UL Rated - Yes Cer ...

Compresses louder signals while boosting lower signals for smooth sustain without degrading the original sound quality. Onboard EQ for precise tonal control and low-noise design for super-quiet operation. Boss CS-3 Specifications: Nominal ...

The FS5L is a latch-type footswitch with an LED to indicate status. It can be connected using ordinary guitar cables.

The Roland US-20 enables a single guitar to control 2 GK-compatible units such as the Roland GR-55, VG-88, and GR-33. Roland US-20 Features: (1) Input / (2) Output ports for guitars equipped with 13-pin GK-compatible pickups (2) pedals for ...

This FSC-503 Hosa footswitch with all-metal chasse and reinforced switch is designed to withstand years of travel and use. Complete with a 10' hardwired cord with 1/4" TS connector, this footswitch is designed for guitar amp channel switch ...

The BOSS LS-2 is the easy way to switch settings among several effects or amplifiers, or route input and output signals. When used with an AC adaptor, the LS-2 can supply power to several BOSS compact pedals. BOSS LS-2 Specifications: Inpu ...

Introduced in 1978, the BOSS DS1 is a classic! It's BOSS's top selling compact pedal ever for a good reason; this original design has proven time and time again to be the perfect choice for hard rock, metal, and punk guitarists ever since. ...

Rocktron’s world famous HUSH products have been used by professionals for nearly two decades to wipe out noise from preamps, stomp boxes, multi-effects, even those great hand built amps and preamps, without compromising tone. Forget abou ...

Marshall Electronics' V-PS12-500 is a 12 Volt DC, 500mA regulated power supply with coax plug.