Accessories for Microphones

The WS-30 foam windscreen is a replacement windscreen for the Telex OLM-10, WLM-10, and WLM-30 wireless headset microphones. The windscreen helps to reduce speaking and environmental noise, lessening pop and light wind that occurs during n ...

Exclusive TecNec SC Audio Cables are designed for use with microphones but are also excellent for line-level signals (i.e. mixer to power amps). These cables are built with Canare L-4E6S Star Quad 4 conductor mic cable

The GN30 gooseneck module is designed for permanent screw-on installation and it includes an in-line XLR phantom power adapter featuring an integrated 250Hz bass rolloff, LED ring, and ON/OFF jumper. The mini XLR connector simplifies insta ...

The GN15 E gooseneck module is designed for fixed or mobile installations and includes an integrated XLR phantom power adapter with a 250Hz bass rolloff, LED ring, and ON/OFF jumper, connecting easily to any standard mixer input with a 9V ...

The AT8129 from Audio-Technica is a miniature foam windscreen. It comes in black and is designed for miniature microphone protective use. Features Miniature foam windscreen Protects against plosives Black

Combination shockmount pistol grip and stand adapter for K6 series. Required for blimp windscreen use.

Perfect for any condenser microphone, the new PB224 powers even the high-current draw microphones. The unit features a complete redesign in the voltage supply circuits, offering a rock solid 48 volts of clean phantom power. The 224 now spo ...

Clip on mic cage with vampire pin back. Clear/Black. For Tram TR50 lavalier microphones.

Pro Co's 150-MIC-XX-SQ cable is a 150-foot, 24AWG quad cable with braided shield, custom double outer jacket, and black Neutrik XLR's with gold contacts on both ends. Pro Co 150-MIC-XX-SQ Specifications: Conductor Gauge: (4)24 gauge Shield ...

The GN15 gooseneck module is designed for permanent screw-on installation and includes an in-line XLR phantom power adapter featuring an integrated 250Hz bass roll-off, LED ring, and ON/OFF jumper. The mini XLR connector simplifies install ...

1/2" (13mm) and 3/8" (10mm) female to 5/8"-27 (16mm-686mm) male.

The ME 104 modular mini-microphone capsule fulfills professional demands for sound quality and rugged handling, and is suitable for all areas of live work where a small and unobtrusive microphone is needed for vocal and speech applications ...

Whirlwind's CLRN10 is a 10" gooseneck that will never creak or lose its position. The flexible black outer skin is ideal for on-camera work. Specifications Length: 10"

Podium/Lectern shock mount for mini-gooseneck microphones 910, 915, 920, CTM16, CTM17, CTM18, and 827. Features: Narrow "footprint" for tight installations Hi mass. low volume, for maximum shock absorption Custom formulated Impact Noise Re ...

The ISOMAX 4RF Stand Clip allows the ISOMAX 4RF podium microphone to be mounted on a standard stage stand.

Locking foam windscreen for Beta 57 and Beta 57A microphones.

5/8"-27 replacement microphone stand nut.

Exclusive TecNec SC Audio Cables are designed for use with microphones but are also excellent for line-level signals (i.e. mixer to power amps). Special 4 conductor configuration plus high shield density reduce hum and noise to less than 1 ...

Tube-style power supply for TR50 mic Single Mallory RM675 or equivalent battery Balanced output on XLR connector 18mm x 85mm Output impedance 250ohms Note: Mic not included.

Blimp windscreen for the ME67, MKH70 requires MZS20-1.

The AT8130 from Audio-Technica is a 3-pack of foam windscreens for lavalier microphones. It comes in black and is designed for use with the A-T MT830 series microphones (sold separately). Features Miniature foam windscreen pad for MT830 mi ...

WindTech's MC-9 holds almost any handheld microphone. It is made from the same virtually unbreakable composite of ABS and Nylon as the MC-4. Standard 5/8"-27 thread with brass insert.

The MC1 microphone clip uses standard 5/8"" threads and also includes a 3/8"" thread adapter for european models. Made with unbreakable nylon flex material and can be used for most dynamic microphones.

Extra large windscreen fits most 'straight' or small ball end microphones up to 3/4" (19mm) diameter (AKG C-451). Inside Diameter: .625" Inside Depth: 1.75" Total Length: 4.375" Overall Diameter: 3.375" Colors available: Black Note: Entire ...