Accessories for Microphones

Tube-style power supply for TR50 mic Single Mallory RM675 or equivalent battery Balanced output on XLR connector 18mm x 85mm Output impedance 250ohms Note: Mic not included.

Blimp windscreen for the ME67, MKH70 requires MZS20-1.

The AT8130 from Audio-Technica is a 3-pack of foam windscreens for lavalier microphones. It comes in black and is designed for use with the A-T MT830 series microphones (sold separately). Features Miniature foam windscreen pad for MT830 mi ...

WindTech's MC-9 holds almost any handheld microphone. It is made from the same virtually unbreakable composite of ABS and Nylon as the MC-4. Standard 5/8"-27 thread with brass insert.

The MC1 microphone clip uses standard 5/8"" threads and also includes a 3/8"" thread adapter for european models. Made with unbreakable nylon flex material and can be used for most dynamic microphones.

Extra large windscreen fits most 'straight' or small ball end microphones up to 3/4" (19mm) diameter (AKG C-451). Inside Diameter: .625" Inside Depth: 1.75" Total Length: 4.375" Overall Diameter: 3.375" Colors available: Black Note: Entire ...

This four-conductor-shielded configuration can best be thought of as two twisted pairs twisted together. Using four small conductors in place of two large ones allows the loop area of the cable to be further reduced and its rejection of el ...

The Neutrik GN18 is a 9" (230 mm) long gooseneck with a 0.47" (12 mm) diameter, and is designed for flexible and secure mounting of microphones, lamps, etc. It is made of a durable stainless steel spiral with a non-reflective black finish ...

Gooseneck only, 500 mm, 15 mm diameter. For flexible and secure mounting of microphones, lamps etc. The versatile, modular system allows all conceivable combinations. Durable stainless steel spiral, non-reflective black finish. No rust, no ...

Supercardioid cartridge for WL183, WL184, WL185 and all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 Microphones. Note: [Black version pictured above]

The Shure R185W is a cardioid cartridge for all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 microphones.

Accessory kit for MK102/104 consisting of MZQ222 MZQ222-NI, MZQ100-ANT, MZQ100-GR, ZH100-ANT, ZH100-GR and case Specifications Weight: 320g

The Whirlwind MK401NP is 1' MKE4 Series XLRM-XLRF microphone cable, unpackaged. MK cables are extremely flexible, resistant to handling microphonics and reliable under the roughest conditions. Accusonic+2 features finely stranded center co ...

The Whirlwind MK406NP is 6' MKE4 Series XLRM-XLRF microphone cable, unpackaged. MK cables are extremely flexible, resistant to handling microphonics and reliable under the roughest conditions. Accusonic+2 features finely stranded center co ...

The Whirlwind MK303-P2 is a 3' MK3 Series XLRF-1/4" TSM Unbalanced Microphone Cable. This cable is made with a female XLR and a male 1/4" plug. The P2 indicates pin 2 of the XLR is tied to the tip of the 1/4" plug. The remaining pins of th ...

The Whirlwind MK303-P3 is a 3' MK3 Series XLRF-1/4" TSM Unbalanced Microphone Cable. This cable is made with a female XLR and a male 1/4" plug. The P3 indicates pin 3 of the XLR is tied to the tip of the 1/4" plug. The remaining pins of th ...

The Whirlwind MK310-P2 is a 10' MK3 Series XLRF-1/4" TSM Unbalanced Microphone Cable. This cable is made with a female XLR and a male 1/4" plug. The P2 indicates pin 2 of the XLR is tied to the tip of the 1/4" plug. The remaining pins of t ...

The Whirlwind MK310-P3 is a 10' MK3 Series XLRF-1/4" TSM Unbalanced Microphone Cable. This cable is made with a female XLR and a male 1/4" plug. The P3 indicates pin 3 of the XLR is tied to the tip of the 1/4" plug. The remaining pins of t ...

The Whirlwind MK318-P2 is a 18' MK3 Series XLRF-1/4" TSM Unbalanced Microphone Cable. This cable is made with a female XLR and a male 1/4" plug. The P2 indicates pin 2 of the XLR is tied to the tip of the 1/4" plug. The remaining pins of t ...

The Whirlwind MK318-P3 is a 18' MK3 Series XLRF-1/4" TSM Unbalanced Microphone Cable. This cable is made with a female XLR and a male 1/4" plug. The P3 indicates pin 3 of the XLR is tied to the tip of the 1/4" plug. The remaining pins of t ...

The Whirlwind MK325-P2 is a 25' MK3 Series XLRF-1/4" TSM Unbalanced Microphone Cable. This cable is made with a female XLR and a male 1/4" plug. The P2 indicates pin 2 of the XLR is tied to the tip of the 1/4" plug. The remaining pins of t ...