Accessories for Microphones

Designed specifically for use with the Coles 4040 ribbon microphone, this Stereo Bar allows you to precicesly position a pair of 4040s for use in Blumlein, XY, or other stereo recording configurations. Coles 4040-STEREO-BAR Includes: Coles ...

Coles 4038-STEREO-BAR Stereo Bar for 4038 Microphone The 4038-STEREO-BAR has two adjustable mounting adapters for Coles 4038 Studio Ribbon Microphones that attach to a crossbar. The crossbar has multiple locations for the mic adapters and ...

Coles 4104-STAND Desktop Stand for 4104 Microphone Designed to hold the Coles 4104 Commentators Microphone, the 4104-STAND incorporates a wired connection from the mic to an XLR male connector at the stand base. Coles 4104 TS Includes: 410 ...

Milab TS-84 Table Stand for VM-44 Gooseneck Designed for the Milab VM-44 gooseneck microphone, the TS-84 is a robust table stand machined from solid brass. It has a built-in rubber shock absorber to suppress noise from the table or desk an ...

Milab BLM-44-PLATE Boundary Layer Plate for VM-44 Link The BLM-44-PLATE is a boundary layer plate that turns the VM-44 Link small-diaphragm condenser mic into a boundary layer microphone. Milab BLM-44-PLATE Includes: BLM-44-PLATE Boundary ...

Milab W-40-MILAB 40mm Windscreen for LSR-3000, BDM-01 The W-40 windscreen is made from open-cell acoustical foam to allow the free passage of sound with no alteration of the frequency response. It reduces wind noise, pops, and breath sound ...

Milab W-25-MILAB 25mm Windscreen for DC-96B, DC-96C, DC-196 The W-25 windscreen is made from open-cell acoustical foam to allow the free passage of sound with no alteration of the frequency response. It reduces wind noise, pops, and breath ...

IO-S6 is a dedicated peripheral engineered for the purpose of augmenting input/output (I/O) connectivity at the posterior aspect of AVID S6 consoles. This augmentation facilitates the integration of various peripherals, including but not l ...

 

Designed specifically with content creators in mind, this MBS9500 Microphone Boom Arm by On-Stage offers the perfect solution for ease of operation and reliable mic control. This internally augmented stand provides a wide range of motion t ...

On-Stage ASVSM5-B Metal Pop Blocker The On-Stage ASVSM5-B Metal Pop Blocker prevents vocal plosives using an all metal screen filter that inhibits pops and hisses without affecting vocal tone. It attaches quickly to mic stands with a C-cla ...

Professional Sound Corporation FPSC0035 Universal Small Shock Mount with Boom Pole Mount The PSC FPSC0035 Universal Small Shock Mount is designed to provide stable, noise-free handling for a wide variety of microphones. It is constructed o ...

Professional Sound Corporation FPSC0035A Universal Large Shock Mount with Boom Pole Mount The PSC FPSC0035A Universal Large Shock Mount is designed to provide stable, noise-free handling for a wide variety of microphones. It is constructed ...

Professional Sound Corporation FM5PRO M5 Pro Shock Mount with Boom Pole Mount The ultimate microphone shock mount. Building upon the design principals of the original PSC/McDonald universal shock mount in use world-wide since 1985, PSC off ...

Content creators know the ability to adjust your microphone in a safe and controlled fashion is crucial to creating exciting and successful content. Enter m!ka's YT3505 On Air Microphone Arm XS, their most compact and efficient mic arm ava ...

The SB-SUR system offers an advanced solution for mounting up to 5 microphones, allowing for versatile microphone configurations. In its standard setup, three microphones can be mounted as a "front triplet," while two microphones can be po ...

The adjustable mic holder equipped with a precision angle scale, offering unparalleled control over microphone positioning. The holder features precise 5-degree markings, ranging from +90 to -90 degrees, enabling accurate and reproducible ...

Designed to provide an extra layer of wind protection to your KM-26 parabolic collector, the KM-26-WC wind cover minimizes wind noise when recoeding in extreme wind conditions. The cover slips over the KM-26 frame and closes in the back wi ...

Designed to provide an extra layer of wind protection to your KM-26-TE parabolic collector, the KM-26-TE-WC wind cover minimizes wind noise when recording in extreme wind conditions. The cover slips over the KM-26-TE frame and closes in th ...

Designed to provide an extra layer of wind protection to your KM-16 parabolic collector, the KM-16-WC wind cover minimizes wind noise when recoeding in extreme wind conditions. The cover slips over the KM-16 frame and closes in the back wi ...

Designed to provide an extra layer of wind protection to your KM-09 parabolic collector, the KM-09-WC wind cover minimizes wind noise when recoeding in extreme wind conditions. The cover slips over the KM-09 frame and closes in the back wi ...

Klover KM-16-610 Sound Shield Bracket for MiK 16” The KM-16-610 Sound Shield Bracket replaces the standard MiK 16 handle with a clear polycarbonate dish that enables nearly invisible mounting to a Magic Arm or any 1/4-20 stud/bolt. This ...

Klover KM-16-189 90-Degree Sound Shield Bracket for MiK 16” The KM-16-189 90° bracket allows the Klover MiK 16 parabolic microphone to be used in a stationary situation instead of being held by an operator. The bracket provides easy att ...

Klover KM-16-199 90-Degree Hard Mount Bracket for MiK 16” The KM-16-199 90° bracket allows the Klover MiK 16 parabolic microphone to be used in a stationary situation instead of being held by an operator. The bracket provides easy attac ...