Antenna Accessories for Wireless Mics

The Shure UA834 provides more flexibility in wireless installations by increasing the allowable length of cable runs between a receiver and antenna. Antennas may be placed closer to the stage, or installed on ceilings and walls that mainta ...

The Shure UA505 Remote Antenna Mounting Bracket Kit lets you mount a 1/2 wave receiver antenna away from the receiver or the equipment rack. This kit includes one mounting bracket, a bulkhead adapter, and bulkhead adapter nut. NOTE: Antenn ...

The EW-D-AB is a filtered, inline antenna booster for Sennheiser's EW-D Series of digital wireless systems. It is designed to provide up to +12dB of boost to compensate for signal loss from long cable runs. Equipped with BNC connectors and ...

The Shure Model UA440 Antenna Rack Mount Kit allows the antennas supplied with Shure wireless receivers to be mounted on a standard 19" (483 mm) audio equipment rack. Front Mount Antenna Kit, updated with four (4) BNC-BNC coaxial cables an ...

Featuring a pair of UHF wideband powered in-line antenna boosters, the ATW-B80WB package from Audio-Technica is designed to increase the RF signal strength to compensate for antenna cable loss. When paired with the appropriate UHF antennas ...

RF Venue's Diversity Fin™ stand-mount parts kit includes two mounting blocks with hardware and a six whip antenna with BNC male connection.

The WA874ZP from Shure is a zippered pouch provides weather resistance for the Shure UA874 Active directional antenna (sold separately).

This padded canvas cover is for RF Venue's Diversity Fin series and is made to protect this "shark finned" unit from the elements and being handled during transport.

The RF Venue BPF470T560 470-560 MHz Band-pass Filter helps eliminate "out of band" signals that can saturate the front end of wireless microphone receivers and can greatly improve dynamic range by reducing noise and third party interferenc ...

Wall mounting kit for remote antennas Adjustable ratcheting mount for attaching remote antennas to a structure such as a wall, beam or runner. 5/8" threaded at either end with mounting flange for secure mounting.

Designed to boost antenna signal by +12dB to compensate for losses created by long cable runs, the AB4 filtered antenna booster is equipped with BNC connectors and is compatible with all legacy evolution wireless systems. The AB4’s filte ...

The Shure UA505-RSMA is a paintable wall mount. It works with PA805-RSMA and GLX-D® Advanced.

Bringing a stronger signal to your wireless receiver, the Bogen UHFASA antenna signal amplifier applies a 360-degree coverage angle and 10 dB of added gain to transmitted signals. The result is stronger transmission and improved audio from ...

The On-Stage RFM1210 Antenna Rack Mount fits any standard 19" 1U rack and includes (6) 3 ft 50 Ohm BNC cables, (2) copper signal splitters and (2) 40 x 8 cm hook and loop strips. On-Stage RFM1210 Antenna Rack Mount Features: Fits any stand ...

The Shure UA600 is a front mount antenna kit for Model U4S, U4D and UC4 UHF wireless receivers. What's in the Shure UA600 Box: 2 bulkhead adapters 2 1/2” internal-tooth lockwashers 2 1/2-28 hex nuts 2 RG-58/U antenna cables

The RF Venue BPF560T608 560-608 MHz Band-pass Filter helps eliminate "out of band" signals that can saturate the front end of wireless microphone receivers and can greatly improve dynamic range by reducing noise and third party interferenc ...

Enhance the operational efficiency of your wireless microphone system by incorporating the RF Venue RF Band-Pass Filter (470 to 698 MHz). Engineered to precision, RF Venue band-pass filters effectively mitigate extraneous signals beyond de ...

Experience the full dynamic range of your wireless microphones by eliminating out-of-band interference with an RF Venue Band Pass Filter. These compact filters are designed to eliminate outside interference, reduce noise, and improve dynam ...

High-performance antenna booster for inserting into long antenna cables. One AB 4000 can compensate for approx. 17 dB of cable attenuation, allowing RG 213 cable runs to be extended by approx. 60 m (200 feet). Up to three AB 4000 boosters ...

The ATW-BH1 from Audio-Technica enables the extension of wireless antenna connection locations to external walls and/or blank panels of a metal equipment rack, allowing you to mount antennas in locations away from the receiver. It's design ...

ALP Series and SNA600 antennas all include a 50 Ohm BNC connector and a 3/8"-16 stainless steel mounting stud. The mounting stud adapts these antennas for use with the optional mounting adapter kit. Also works with the discontinued ALP700A ...

Lectrosonics' UFM230 is used to configure antenna systems requiring long cable runs or distribution to multiple receivers. RF filtering before gain minimizes intermodulation (IM) products and prevents overload. Two transmission line cerami ...

Listen Technologies' LA-130 Remote Antenna Kit (863 MHz) allows the user to remotely place the LA-129 antenna for better coverage. The kit comes with 25 feet (7.6 m) of 50 ohm coaxial cable. The cable is equipped with BNC connectors on bot ...

Passive in-line RF filter with 25MHz passband. Designed for use with VRMWB and VRField WB wide-band receiver systems in cases where the full bandwidth of the receiver is not needed. The PF25 passive filter is inserted into a coaxial line b ...

Broadband Antenna Booster for the Sennheiser EM3732. Compatibility EM 3731/3732 EM 2000/2050 EM 6000 Features Frequency range 470 – 866MHz Gain from 5 to 15dB Bypass operation if booster feed is missing Display of settings via two multi- ...

Lectrosonics' UFM230L is used to configure antenna systems requiring long cable runs or distribution to multiple receivers. RF filtering before gain minimizes intermodulation (IM) products and prevents overload. Two transmission line ceram ...

SMA right angle adapter, male to female, for SMA antennas.

The Shure UA834 provides more flexibility in wireless installations by increasing the allowable length of cable runs between a receiver and antenna. Antennas may be placed closer to the stage, or installed on ceilings and walls that mainta ...

The Shure UA834 provides more flexibility in wireless installations by increasing the allowable length of cable runs between a receiver and antenna. Antennas may be placed closer to the stage, or installed on ceilings and walls that mainta ...

The Lectrosonics 21770 is a male SMA to female BNC coaxial adapter. It adapts antennas with male BNC connectors to SMA jacks.

Sennheiser's AB9000 is a remote-controlled antenna booster that contains 8 highly-selective filters, each allowing a 24MHz frequency window to pass, adding significant safety to the system, as it directly blocks unwanted signals before the ...

The GA2-XSW2 is a kit used for front-mounting antennas with the EM-XSW2 receiver and provides improved reception and easy access. It includes two BNC cables and 2 panel-mount BNC connectors. Note: Image shown above is for illustrative purp ...

The ILAMP-ACT is an in-line amplifier that is engineered to compensate for signal loss on long coax runs. A single in-line amplifier can compensate for 10 dB of cable attenuation which is about 20m of RG-58 cable. Can be powered by power o ...

An RF amplifier specifically designed to be used with 10-12 meter length cable runs of RG58 / URM43 connecting to remote antennae.

Cable Assembly, Bulkhead BNC Male to BNC Female 12” BNC Antenna Loop-Around Cable for R400 Rack Mount Kit

Color coded transmitter antenna caps

Antenna mounting kit for M2 Duet Series M2T Transmitter. The M2T transmitter occupies a half-rack space and comes with hardware to mount two (2) M2T Transmitters into a rack. RMPM2T-1, a single rack mount kit, is also available. You will n ...

For single battery transmitter. The antenna points DOWN when the transmitter is worn on a belt.

For single battery transmitter. The antenna points DOWN when the transmitter is worn on a belt.

For single battery transmitter. The antenna points UP when the transmitter is worn on a belt.

The UHFRTF is a rear-to-front antenna adapter for use with Bogen's UHF8011 wireless wireless system.

Antenna extension kit for 900MHz and 2.4GHz CrewCom CB2 series BaseStations. Included in the kits is a 5 ft. RP TNC male to RP TNC female bulkhead cable and mounting bracket for a standard rack mount setup. This kit allows for remote conne ...

Bringing a stronger signal to your wireless receiver, the Bogen UHFASA antenna signal amplifier applies a 360-degree coverage angle and 10 dB of added gain to transmitted signals. The result is stronger transmission and improved audio from ...

High-performance antenna booster for inserting into long antenna cables. One AB 4000 can compensate for approx. 17 dB of cable attenuation, allowing RG 213 cable runs to be extended by approx. 60 m (200 feet). Up to three AB 4000 boosters ...

 

Engineered specifically for integration with SpeechLine digital wireless systems, the Sennheiser AWM 2 MK II stands as a discreet yet powerful antenna solution. Designed for versatile deployment, it can be seamlessly affixed either onto a ...