Clips, Mounts, Pouches for Wireless Mics

The Shure WA371 is a swivel-mount clip for all Shure handheld wireless transmitters, and has a standard 5/8"-27 thread receptacle for mic stand mounting.

Presenting the Dual Earhook Mount from DPA Microphones, expertly crafted in a distinguished beige hue, meticulously engineered to seamlessly integrate with d:fine Headset Microphones. This innovative mount adopts a dual-ear design that sec ...

The ideal complement to the Countryman E6 and E6i EarSet microphones, the EarClip provides comfortable, adjustable, extremely low-profile two-ear support. Built of the same lightweight, incredibly durable materials used in our EarSets, the ...

The d:fine Headset Mount, an ideal solution for those seeking a replacement mount for their d:fine microphone. This headset mount is specifically designed to seamlessly integrate with the DPA d:fine line of headset microphones. The HE2B12 ...

Neoprene body-pack belt pouch for LX1, SC1, T1, SLX1, U1, UT1 and ULX1 bodypack transmitters. This item is an ideal accessory for fitness instructors.

The DPA HEF12P is a single-ear earset mount in beige for DPA d:fine Headset Microphones.

The Lav-Headset is an innovative and ergonomic headset-style wearable mount that offers increased versatility for users of the RØDE Lavalier and smartLav+ lapel microphones. It allows the microphone to be worn in close proximity to the mo ...

The H6 Headset Headframe provides a secure and comfortable fit on the head; compatible with both omni and directional H6 models.

The H6 Headset Headframe provides a secure and comfortable fit on the head; compatible with both omni and directional H6 models.

The WA301 Water Resistant Cover for SLXD5 is an essential protective accessory designed to safeguard the SLXD5 Portable Receiver from moisture and environmental elements. Crafted with durable materials, this cover shields the receiver, ens ...

The HE2F8P is a small beige dual-ear headset mount for DPA 4166, 4266, 4188, and 4288 headsets that can be used as a replacement for a damaged mount or to change from a single-ear to a dual-ear mount. The HE2F8P is lightweight and fully ad ...

Point Source Audio's R-DMC-BE is their beige reversible deal earset clip. Can be used to orient the mic to the left or right side of the face. Compatible with Point Source Audio's CO-3, CO-5, CO-6, and CO-7 microphones.

Dual post tie clip for MKE platinum, MKE2, MKE102 AND MKE104. Premium grade clip for ME2 and ME4 (optional) Since we use essentially the same cable diameter on all of our lavaliers (except the new MKE Platinum), the MZQ222 and MZQ222-NI wi ...

The Sennheiser SKM-MIC-BAG is a pouch with zipper made especially for any SKM Evolution Series Handheld mic/transmitter model (sold separately).

The EarClip cable hook attaches to the back of the EarClip to position and secure the E6 Snap On cable. EarClip cable hooks are sold individually; please specify cable diameter and color.

The WA311 Non-Conductive Camera Adaptor for the SLXD5 Portable Receiver is a versatile accessory designed to facilitate easy integration of the receiver into camera setups without the risk of electrical interference. Crafted with non-condu ...

Sennheiser's 508651 is a Hot Shoe Camera Mount designed to securely hold an XSW-D receiver.

Replacement stainless wire belt for LM and IS400-Type transmitters.

A replacement belt clip for the Sennheiser EW-D SK Digital Wireless Body Pack Transmitter.

This is a 5-pack of clips, used for connecting the MMB4066, MMB4067, or MMB4088 microphone boom arms to the AHM6000 headband mount.

Belt clip for SM10, SM11, SM12 and SM14 microphones.

Black Tie Bar with alligator clip for the TR50.

A black swiveling belt clip for the Telex TR-800/700 Transceivers. [pictured with transceiver, sold separately]

Retainer clip for Venue, VR Field receiver modules

Hinged belt clip for single battery SM transmitters. Antenna and mic connector will face up. Comes with Allen wrench and spare hex screw for mounting.

This unit is a frame, designed for the H6 headworn microphone. It provides a secure and comfortable fit on the head for both H6 omin and H6 directional models. The headframe can be adjusted to fit different head sizes and the mic boom slid ...

The RØDE invisiLav is designed to aid the concealing of the Lavalier and smartLav microphones. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and allows for versatile mo ...

The Que Audio QA22 EC are ear cushions for QA22 (pair).These ear cushions are flexible so they can easily adapt to any ear size and shape.

The Ace Backstage Co W-CLIP is a W-clip for wireless transmitter for Audio-Technica®® Choir Stick Mic.

Exchangeable, horizontal clip for SK 6212.

 

The S-Clip is a replacement 4-pack of control clips used to connect a Point Source microphone to the headset ear connector (all sold separately).

Belt clip for SSM transmitter, antenna up orientation.

 

The On-Stage MA1435 Wireless Transmitter Body pack provides stable placement of a wireless transmitter to a performer without losing comfort. The compact pouch fits a wide range of wireless transmitters. It can be worn under or over costum ...

Presenting the Dual Earhook Mount from DPA Microphones, expertly crafted in a distinguished brown hue, meticulously engineered to seamlessly integrate with d:fine Headset Microphones. This innovative mount adopts a dual-ear design that sec ...

This brown single-ear mount from DPA Microphones is designed for comfortable and customizable placement of your wireless headset mic on either the left or right ear. Get your mic exactly where you want it with this durable and versatile Ea ...

The HE2C8P is a small broen dual-ear headset mount for DPA 4166, 4266, 4188, and 4288 headsets that can be used as a replacement for a damaged mount or to change from a single-ear to a dual-ear mount. The HE2C8P is lightweight and fully ad ...

The beige lightweight (4 grams) AHM6000-LP large headband for DPA MMB 4066, 4067, and 4088 microphones presents a low profile with full adjustability for ideal placement and comfortable hands-free operation.

The beige lightweight (4 grams) AHM6001P headband for DPA MMB 4066, 4067, and 4088 microphones presents a low profile with full adjustability for ideal placement and comfortable hands-free operation.

The black lightweight (4 grams) AHM6000-LP large headband for DPA MMB 4066, 4067, and 4088 microphones presents a low profile with full adjustability for ideal placement and comfortable hands-free operation.

Clip for right angle KA cables

Dual post tie clip for MKE platinum, MKE2, MKE102 AND MKE104. Premium grade clip for ME2 and ME4 (optional) Since we use essentially the same cable diameter on all of our lavaliers (except the new MKE Platinum), the MZQ222 and MZQ222-NI wi ...

Protective pouch for plug-in transmitter (optional) Protect your SKP100 or SKP500 plug-in transmitter module with this leather and elastic protective pouch. Velcro closure secures the transmitter inside, while a clear plastic window allows ...

Belt clip replacement kit for LM belt-pack transmitters. Kit includes hinged belt-clip, mounting screws and rubber cushion.

Replacement wire belt clip for UHF belt-pack transmitters using single screw mounting. Kit includes nickle plated wire clip, machined aluminum mounting block, mounting screws and allen wrench.

Belt clip for attaching SM transmitter with the antenna pointing down.

Belt clip for attaching the SM with the antenna pointing up.

Belt clip for attaching the SMD and SMQ transmitters. Mounts either up or down.

Waterproof case for R400a and UH400a transmitter. It comes standard with the TM400 test mic system.

Adapter kit for Sony® camera slots. Includes bezel, hardware, spare gasket and rear panel DB15 connector wired for power and audio connections.

Adapter kit for SR receiver, two TA3 audio output jacks, locking power connector, includes 6' power cord. Has spare mounting screws in dummy holes in adapter.

Hinged belt clip for dual battery SM transmitters. Antenna and mic connector can face either up or down. Comes with Allen wrench and spare hex screw for mounting.

Shoe mount adapter for URX-P2. For use with UWP Series Portable Receivers.

Lavalier microphone holder clip for UWP series wireless systems. 4 pack, black.

The BPC-300 Detachable Belt Clip for the Electro-Voice BP-300 allows you to clip the BP-300 bodypack transmitter to your clothing for convenient hands-free use.

Mounting sleeve for a SR receiver, includes Velcro.

Hardware kit for SRSLEEVE with right angle and straight brackets for cold shoe mounting.

The AFP301 is a belt clip and protective skin for the UR3 plug-on wireless microphone transmitter.

DPA's DUA6016 is a pack of 5 boom holder clips for use with their AHM6001 headset microphones. Note NOTE: One is pictured above in order to show the detail of the clip though 5 are included with purchase.

The RØDE invisiLav is designed to aid the concealing of the Lavalier and smartLav microphones. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and allows for versatile mo ...

The Countryman H6FMC front mic clip guides the H6 microphone for precision adjustability and comes in a pack of four (4) clips.

The Countryman H6FRAMEC is a H6 headset microphone frame in cocoa. The H6 Headset Headframe provides a secure and comfortable fit on the head, and can be purchased separately from the H6 Mic Boom and H6 Cable. The headframe is compatible w ...

The On-Stage Stands MA1335 is a wireless transmitter pouch with guitar strap. It is ideal for comfortably and conveniently holding wireless transmitters on performers. The water resistant compact pouch can be worn on the included guitar st ...

Sanken's HWM Frame is a replacement Steel Frame designed for use with their COS-11D HWM headworn microphones.

The Point Source Audio R-DMC-BL is a black "one-size-fits-all" reversible (left or right) earset mic clip can easily convert any of our single earworn microphones to a dual ear option for added stability.

DPA Microphones' SCM0013-Bx is a versatile, 4-way microphone clip that's designed for use with their line of omnidirectional lavalier mics (sold separately - please see "Features" below for compatibility). It allows you to mount the mic in ...

For single battery transmitter. The antenna points UP when the transmitter is worn on a belt.

The H1 magnet clip is part of the MicroLite series and holds the microphone housing, instead of the delicate cable to ensure a tight hold as well as protecting the cable from breaking. Using the magnet, the clip can be mounted almost every ...

The ZH1 pin mount from Sennheiser that can be used to attach the MKE 1 clip-on microphone to any article of clothing.

The AT8464x is a Dual-Ear Adapter Kit from Audio-Technica that enables you to convert a single-ear MicroSet® headworn microphone, e.g., the BP892x, BP893x, or BP894x mics (sold separately), into a dual-ear mount unit, enhancing stability ...

Exchangeable, vertical clip for SK 6212.

A replacement neckband for the Sennheiser HSP Essential Omni boom microphone.

Padded zipper pouch for handheld transmitters

Replacement stainless wire belt clip for MM400-type watertight transmitters.

Replacement wire belt clip for LT, LR & DB units.

Replacment belt clip for SSM Micro Beltpack Transmitter

Lectrosonics Small Spring Loaded Beltclip, Blue

Spring loaded belt clip for LT Transmitter

Hinged belt clip for single battery SM transmitters. Antenna and mic connector will face down. See SMBCUPSL several spaces below for facing up. Comes with Allen wrench and spare hex screw for mounting.

For dual-battery SM Series transmitter. Can be used with antenna up or down.

This tough silicone cover protects the SSM transmitter from moisture and dust. The pliable material and the two-part design make it easy to install and remove. Cutouts for the antenna and input jack and the raised dome for the LED provide ...

The spring-loaded machined aluminum clip for WM Transmitter.

Steel wire belt clip for WM Transmitter.

The SL-MCR-WALLMOUNT is designed to facilitate mounting SL-MCR-DW series SpeechLine receivers to a wall or ceiling. This is the same mount that originally shipped with those products.

The H2 croco—a standard "crocodile" clip—is part of the MicroLite series and holds the microphone housing, instead of the delicate cable to ensure a tight hold as well as protecting the cable from breaking. It comes in two colors -whit ...

The UHFLMC is a replacement microphone clip for use with Bogen's BCLM1 wireless lavalier microphone.

The UHFWMC is a microphone clip for use with Bogen's UHT8011 wireless handheld microphone but may be used with other handhelds.

 

The Sennheiser XSW-IEM-EK-BC is the Bodypack Belt Clip for the XSW-IEM-EK-A Receiver.

This black single ear mount from DPA Microphones is designed for comfortable and customizable placement on either the left or right ear offering maximum versatility for your wireless headset mic. Get your mic exactly wear you want it with ...

The HE2B8P from DPA Microphones is a lightweight and versatile dual earhook and the perfect replacement for wireless headset mics. User-friendly and completely customizable, this earhook comfortably adjusts to fit any ear or head shape.

The beige lightweight (4 grams) AHM6000P headband for DPA MMB 4066, 4067, and 4088 microphones presents a low profile with full adjustability for ideal placement and comfortable hands-free operation.

The beige lightweight (4 grams) AHM6000-SP small headband for DPA MMB 4066, 4067, and 4088 microphones presents a low profile with full adjustability for ideal placement and comfortable hands-free operation.

The beige lightweight (4 grams) AHM6001-SP small headband for DPA MMB 4066, 4067, and 4088 microphones presents a low profile with full adjustability for ideal placement and comfortable hands-free operation.