Accessories, Capsules for Wireless

The XLRcH from Audio-Technica is a XLR to 4-pin cH-style connector Microphone Input adapter cable. Please note: actual product appearance may vary.

A single rack mount kit for a single R400a-Ver2 Receiver (Receiver not included in RMPR400B-1 Kit). The brackets and couplers are symmetrical so the receiver can be mounted on either the left or right side of the rack.

Countryman offers the Cardioid Protective Cap for the H6 Directional Headset Microphone. Your EarSet should always be used with a protective cap in place to keep sweat, makeup and other foreign material out of the microphone. The microphon ...

Belt clip for SSM transmitter, antenna up orientation.

Countryman's tan H6 omnidirectional headset protective cap seals the microphone against sweat, makeup and other foreign material, and should always be used. This very bright cap boosts the response of the microphone by 8 dB at 15 kHz for t ...

Countryman's cocoa H6 omnidirectional headset protective cap seals the microphone against sweat, makeup and other foreign material, and should always be used. The flat cap does not alter the frequency response of the H6 thus preserving it' ...

AKG SRA2/EW Passive Directional Wide-Band UHF Antenna The SRA2/EW can be used as a transmitting or receiving antenna for wireless microphones and in-ear monitoring systems. This passive directional wide-band UHF antenna operates in the 470 ...

The RMT241 rackmount accessory adapts two R41 or R61 receivers into a single rack space. When using this rackmount, the antennas must remain on the rear side of the receivers.

This standard RG58 extension cable is the perfect length (at 19.69" or 50 cm) to front mount your transmitter or receiver antenna when they are rackmounted. You will also need the front mount connector CN-BNCPM (sold separately). Specifica ...

Unlike earsets that are hard-wired from the mic to the connector, this cable from Countryman will quickly and securely snap into the E6 Earset to link the mic to hardwired or wireless systems. That means you can replace a worn cable at a f ...

Bogen's UHFUDA passively (without power) enhances the reception of your wireless transmitter signal and rejects any unwanted RF signal, resulting in a cleaner, stronger audio transmission. THe UHFUDA is designed to be mic stand-mounted or ...

 

 

Designed for professional transmitting and receiving applications, the AT-70WA bi-functional omnidirectional antenna is optimized for 470-100MHZ and is fully compatible with both US and EU telecom regulations. It has two input connectors: ...

The NT 12-35 CS is a replacement DC power supply for the Sennheiser EW-D ASA Active Antenna Splitter.

A set of 16 magnetic indicators of different colors to assist in identifying EW-D SKM Digital Handheld Transmitters when used in a system.

The On-Stage MA1435 Wireless Transmitter Body pack provides stable placement of a wireless transmitter to a performer without losing comfort. The compact pouch fits a wide range of wireless transmitters. It can be worn under or over costum ...

The Sennheiser 6.6' CABLE-II-X4F Straight Copper Cable is a technologically advanced audio cable designed with meticulous attention to detail. Its construction incorporates a short coil that effectively minimizes structure born noise, ensu ...

Distinguishing itself from conventional headsets with fixed mic-to-connector wiring, our advanced cables offer a swift and secure snap-in mechanism to seamlessly connect the microphone to the H6 Headset, facilitating wireless system integr ...

The H6CABLEL-TO from Countryman is a hardwired 3.5mm snap-on cable that is suitable with H6 headsets and comes in light beige. Unlike headsets that are hard-wired from the mic to the connector, Countryman H6 Headset Snap-On Cables quickly ...

The HE2C8P is a small broen dual-ear headset mount for DPA 4166, 4266, 4188, and 4288 headsets that can be used as a replacement for a damaged mount or to change from a single-ear to a dual-ear mount. The HE2C8P is lightweight and fully ad ...

The HE2F8P is a small beige dual-ear headset mount for DPA 4166, 4266, 4188, and 4288 headsets that can be used as a replacement for a damaged mount or to change from a single-ear to a dual-ear mount. The HE2F8P is lightweight and fully ad ...

The beige lightweight (4 grams) AHM6000P headband for DPA MMB 4066, 4067, and 4088 microphones presents a low profile with full adjustability for ideal placement and comfortable hands-free operation.

The beige lightweight (4 grams) AHM6000-LP large headband for DPA MMB 4066, 4067, and 4088 microphones presents a low profile with full adjustability for ideal placement and comfortable hands-free operation.