Accessories, Capsules for Wireless

Compatibility: Sennheiser SK50, SK250, SK3063, SK5012, SK5212 Transmitters. The B2D detachable connectors interface to a wide variety of wireless transmitter packs or an XLR input. This feature provides extreme flexibility for rental compa ...

Compatibility: All Shure transmitters with TA-4F connector. The B2D detachable connectors interface to a wide variety of wireless transmitter packs or an XLR input. This feature provides extreme flexibility for rental companies, consultant ...

Unlike earsets that are hard-wired from mic to connector, our cables quickly and securely snap into the E6/E6i earset to link the mic to the wireless system. That means you can replace a worn cable at a fraction of the cost of replacing th ...

The B6 lavalier should always be used with a protective cap in place to keep sweat, makeup and other foreign material out of the microphone. The three omni caps each have a different high frequency response characteristic that controls the ...

e965 switchable condenser microphone module for G3 or 2000 Series SKM transmitter, nickel. Features Switchable pick-up pattern (cardioid/supercardioid) Microphone: externally polarized condenser microphone Low-cut switch, which reduces amb ...

The design of Neumann capsule heads for the Sennheiser SKM2000 handheld transmitter is based on Neumann's KMS105 and KMS105 wired stage microphones. From these microphones, the capsule heads have acquired not only their outstanding sound c ...

Designed for portable field production, Lectrosonics' Quadpack simplifies the mounting and interconnection of two SRa Series compact receivers. Lightweight and rugged, it is perfectly at home in bag systems containing mixer, recorder and w ...

The AFP301 is a belt clip and protective skin for the UR3 plug-on wireless microphone transmitter.

This unit is a DC power cable designed for use with Lectrosonics receivers and ISO9VOLT/SMBATELIM battery eliminators. The cable is 24" long and has a Hirose connector on one end and a right-angle single-conductor DC plug on the other. ...

This unit is a dual DC power cable designed for use with Lectrosonics receivers and ISO9VOLT/SMBATELIM battery eliminators. The cable is 24" long and has a Hirose connector on one end and two right-angle single-conductor DC plugs on the ot ...

This unit is a 12" straight cable, used for connecting devices to the Battery Bud distributor.Compatibility: Sound Devices 552, 442, 302, PIX 240, PIX 220, 702, 702T, 722, 744T, 788T & MixPre, SQN, PSC M4 mk2, M3 & AlphaMix, Wendt X5, X3, L ...

This unit is an 18" straight cable, used for connecting devices to the Battery Bud distributor.Compatibility: Sound Devices 552, 442, 302, PIX 240, PIX 220, 702, 702T, 722, 744T, 788T & MixPre, SQN, PSC M4 mk2, M3 & AlphaMix, Wendt X5, X3, ...

This unit is a 12" cable for connecting the Cooper CS104 mixer, and the Fostex PD-4 and PD-6 field recorders, to the Cable Techniques Battery Bud distributor. The cable is configured as a Hirose 4-Male to straight XLR 4-pin Female. 

This unit is a 12" 4-Pin XLR Male to Hirose 4 input cable, for use with the Battery Bud distributor.Compatibility: Batteries with a 4-pin XLR-F connector, to input DC into Battery Bud II distribution system.

This unit is a Right Angle DC to Hirose 4-Pin Input Cable, used to power Lectrosonics receivers used on a Betacam camera. Compatibility: Lectrosonics portable receivers like UCR401, UCR411A etc. and Lectrosonics ISO9VOLT Battery Eliminator ...

This unit is a 2 Right Angle DC to Hirose 4-Pin Input Y-Cable used to power Lectrosonics receivers used on a Betacam camera. Compatibility: Lectrosonics portable receivers like UCR401, UCR411A etc. and Lectrosonics ISO9VOLT Battery Elimin ...

Cable Techniques' DC power cables are used to power common equipment from various camera models that incorporate a Hirose 4-pin socket. All Hirose 4 equipped camera cables are carefully handcrafted to the highest standards using only premi ...

Countryman Omnidirectional Earsets' protective cap's frequency response meets the needs of the majority of users, providing a slightly increased response in the 15 kHz range. This will boost the perceived amount of presence in your sound, ...

A passive device (no power supply needed) that takes four (4) incoming RF signals and combines them into one (1) outgoing antenna source. Features: Combines four (4) incoming RF signals and combines them into one (1) outgoing antenna sourc ...

The RMU-01 controls up to 82 digital wireless transmitters via a separate RF carrier in the 2.4GHz spectrum. This unit can be connected using Ethernet cabling (RJ-45) with an optional third-party PoE switch (Power-over-Ethernet) to create ...

Active Directional Antenna. Provides 0 dB,10 dB or 18dB of gain. Various mounting configurations (mic stand, etc.). Two required for Diversity Tuner Operation. This AN-01 is for use with with UHF-TV channels 14 - 69. Features: Active direc ...

Color coded antennas for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Standard male SMA connector. Construction is of nearly indestructible steel wire rope with a stainless steel connector. Block 24 (AMJ-24) ...

Color coded antennas for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Standard male SMA connector. Construction is of nearly indestructible steel wire rope with a stainless steel connector. Specifications Fre ...