Product Overview
Bogen's Power Vector modular amplifiers offer a wide range of power from which to choose from, with five models ranging from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems.
Each model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status.An 11-segment LED output meter monitors output signal level.
Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).
Bogen Communications V250 Features:
- 5 models ranging from 35W to 250W with a large power reserve
- Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads
- 8 module bays
- Wide selection of advanced plug-in modules
- 2 module bays capable of handling signal processing plug-in output modules
- 4 levels of priority between modules
- 11-segment LED output level meter monitors the output level of the power amplifier with Peak and Average meter switch
- Motorized master volume control that can be remotely operated
- Bass and treble controls
- Two-color LED for each channel indicates inputactive/clipping
- Lockable switch permits user to select either transformer- coupled outputs or a direct low-impedance output
- 5-position barrier strip, with clamping washers, provides connections for speaker loads
- Master mute function overrides all audio from the mixer section of the amplifier
- Screw terminal for master mute and remote volume control functions
- Each of the 8 module bays has an associated independent volume control
- Bass and treble control bypass switch (located inmodule bay 6)
- 125 Hz Lo-cut feature (switch located in module bay 6)
- Signal processing insert jacks allow external equipment to be inserted between the pre-amp output and the power amp input
- Pre-EQ unbalanced buffer output signal “post” all unit controls, but “pre” any external signal processing equipment connected
- Grounded, unswitched AC convenience receptacle with a 500W maximum capacity provided for external equipment
- Remote volume control panel (RVCP) (sold separately)
- Security cover to protect volume, bass, and treble controls (PVSC) (sold separately)
- Rack mountable (rack mounting kit RPK87 sold separately)
- 2 rack spaces high (3-1/2")
Bogen Communications V250 Specifications:
- Power Output (RMS):
- Rated:250W
- Typical @ 1 kHz: 340W
- Frequency Response:
- Transformer: 45-20 kHz; 0/-2dB
- Direct: 20-20 kHz; 0/-1 dB
- Distortion:
- Transformer:0.5%
- Direct: 0.1% (.05 typical @ 1 kHz)
- Signal-to-Noise:
- Fundamental: -94dB
- With Aux Module: -70 dB
- With Mic Module: -60 dB
- With Tel Module: -70 dB
- Tone Controls:
- Bass Frequency: 100 Hz (+/- 10 dB minimum)
- Treble Frequency: 10 kHz (+/- 10 dB minimum)
- Low Cut Frequency: 125 Hz @ -6 dB/octave
- Sensitivity: 0.4V (at module bay connector)
- Output Regulation: 2 dB or better, no load to full load
- Output Impedance:
- Transformer-Coupled: 70V, 25V, 8ohms (bal or unbal)
- Direct Coupled: 4 ohms
- Inserts:
- Insert "OUT" Level: 1VRMS(@FRP)
- Insert "OUT" Impedance: 50 ohms maximum
- Insert "IN" Sensitivity:1VRMS
- Insert "IN" Impedance: 10k ohms minimum
- Pre-EQ Output:
- Output Level: 4VRMS(@FRP)
- Output Impedance: 50 ohms maximum
- AC Power Receptacle: 500 watts maximum power, unswitched
- AC Voltage: 120V AC, 60Hz
- AC Current: 5.5A
- Dimensions (W x H x D): 16-1/2" x 3-1/2" x 12"
- Weight: 40 lbs.
